Integration Test Results

Test	Supported	Lab started	Devices configured	Validated	Test date	Device image
01-network		✅	✅	✅	2025-03-06 07:11:47	aruba/cx:10.13
02-areas		✅	✅	✅	2025-03-06 07:12:54	aruba/cx:10.13
03-cost		✅	✅	✅	2025-03-06 07:14:00	aruba/cx:10.13
04-passive		✅	✅	✅	2025-03-06 07:15:14	aruba/cx:10.13
05-unnumbered	❌				2025-03-06 07:15:19
06-lb-prefix		✅	✅	✅	2025-03-06 07:16:12	aruba/cx:10.13
07-vlan-mtu		✅	✅	✅	2025-03-06 07:17:17	aruba/cx:10.13
10-import		✅	✅	✅	2025-03-06 07:18:27	aruba/cx:10.13
11-import-policy		✅	✅	✅	2025-03-06 07:19:38	aruba/cx:10.13
20-default		✅	✅	✔	2025-03-06 07:20:59	aruba/cx:10.13
Aruba CX cannot specify the OSPF external route type on the default route. All default routes are advertised as E2 routes.
21-default-policy	❌				2025-03-06 07:21:05
22-default-vrf		✅	✅	✅	2025-03-06 07:22:12	aruba/cx:10.13
30-timers		✅	✅	✅	2025-03-06 07:23:07	aruba/cx:10.13
31-priority		✅	✅	✅	2025-03-06 07:24:34	aruba/cx:10.13

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices