Integration Test Results

Device srlinux
Provider clab
Test suite ospf/ospfv2
Test Supported Lab
started		 Devices
configured		 Validated Test date Device
image
01-network ✅ ✅ ✅ 2026-05-19 07:54:03 ghcr.io/nokia/srlinux:26.3.2
02-areas ✅ ✅ ✅ 2026-05-19 07:54:33 ghcr.io/nokia/srlinux:26.3.2
03-cost ✅ ✅ ✅ 2026-05-19 07:55:04 ghcr.io/nokia/srlinux:26.3.2
04-passive ✅ ✅ ✅ 2026-05-19 07:55:47 ghcr.io/nokia/srlinux:26.3.2
05-unnumbered ✅ ✅ ✅ 2026-05-19 07:56:16 ghcr.io/nokia/srlinux:26.3.2
06-vlan-mtu ❌ 2026-05-19 07:56:18
OSPFv2 works over VLAN interface on SR Linux. SR Linux does not accept MTU values lower than 1436.
10-import ✅ ✅ ✅ 2026-05-19 07:56:49 ghcr.io/nokia/srlinux:26.3.2
11-import-policy ❌ 2026-05-19 07:56:51
20-default ✅ ✅ ✔ 2026-05-19 07:57:30 ghcr.io/nokia/srlinux:26.3.2
  • SR Linux cannot set OSPF metric or metric type on default route redistributed into OSPF
  • Node probe: There is no path to 0.0.0.0/0 in the OSPF topology with cost=40
  • Node probe: There is no path to 0.0.0.0/0 in the OSPF topology with cost=30
21-default-policy ❌ 2026-05-19 07:57:31
22-default-vrf ✅ ✅ ✅ 2026-05-19 07:58:10 ghcr.io/nokia/srlinux:26.3.2
30-timers ❌ 2026-05-19 07:58:11
31-priority ❌ 2026-05-19 07:58:12
32-password ❌ 2026-05-19 07:58:12
40-area-parameters ✔ ✅ ✅ ✔ 2026-05-19 07:58:49 ghcr.io/nokia/srlinux:26.3.2
  • srlinux: dut cannot apply a default cost (15) to NSSA area 0.0.0.22
  • Node r22: The default route inserted in NSSA/stub area has wrong cost
  • Node rb: Inter-area routes do not have the correct cost
  • Node rb: NSSA range is missing or has incorrect cost

Notes: