[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [pe2]
ok: [c1]
ok: [dut]

TASK [Find device readiness script] ********************************************
ok: [pe2]
ok: [c1]
ok: [dut]

TASK [Wait for device to become ready] *****************************************
skipping: [dut]
skipping: [pe2]
skipping: [c1]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, pe2, c1

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [pe2]
ok: [c1]
ok: [dut]

TASK [Find configuration template for initial] *********************************
ok: [pe2]
ok: [c1]
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    initial configuration for dut
    =========================================
    hostname dut
    !
    lldp
    !
  
    vrf tenant
        rd 65000:1
    !
  
        address-family ipv4 unicast
            route-target import 65000:1
            route-target export 65000:1
        exit-address-family
        address-family ipv6 unicast
            route-target import 65000:1
            route-target export 65000:1
        exit-address-family
  
  
  
    interface loopback 0
        ip address 10.0.0.1/32
        ipv6 address 2001:db8:1:1::1/64
    !
    interface mgmt
        no lldp transmit
        no lldp receive
    !
  
  
    interface 1/1/1
        shutdown
        mtu 9198
        vrf attach tenant
        description dut -> c1
        ip address 172.16.0.1/24
        ipv6 address 2001:db8:2::1/64
        no ipv6 nd suppress-ra
        ipv6 nd ra min-interval 3
        ipv6 nd ra max-interval 4
        no shutdown
    !
  
    interface 1/1/2
        shutdown
        mtu 9198
        vrf attach tenant
        description dut -> stub [stub]
        ip address 192.168.42.1/24
        ipv6 address 2001:db8:42::1/64
        no ipv6 nd suppress-ra
        ipv6 nd ra min-interval 3
        ipv6 nd ra max-interval 4
        no shutdown
    !
  
    interface loopback 1
        vrf attach tenant
        description VRF Loopback tenant
        ip address 10.2.0.1/32
        ipv6 address 2001:db8:4::1/64
        no ipv6 nd suppress-ra
        ipv6 nd ra min-interval 3
        ipv6 nd ra max-interval 4
    !
    !
ok: [pe2] => 
  msg: |-
    initial configuration for pe2
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname pe2
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.3/32
     ipv6 address 2001:db8:1:3::1/64
    !
    interface eth1
     no shutdown
     description pe2 -> c1
     ip address 172.16.1.3/24
     ipv6 address 2001:db8:2:1::3/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [c1] => 
  msg: |-
    initial configuration for c1
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
    sysctl -qw net.ipv6.conf.eth2.autoconf=0
    sysctl -qw net.ipv6.conf.eth2.accept_ra=0
    ip link set eth2 down
    ip link set eth2 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    ip link set eth2 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname c1
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.2/32
     ipv6 address 2001:db8:1:2::1/64
    !
    interface eth1
     no shutdown
     description c1 -> dut
     ip address 172.16.0.2/24
     ipv6 address 2001:db8:2::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    interface eth2
     no shutdown
     description c1 -> pe2
     ip address 172.16.1.2/24
     ipv6 address 2001:db8:2:1::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [pe2]
ok: [c1]
ok: [dut]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/initial-clab.yml for pe2, c1

TASK [tempfile] ****************************************************************
changed: [dut -> localhost]

TASK [template] ****************************************************************
changed: [dut -> localhost]

TASK [aoscx_config: set session auto-confirm for initial] **********************
changed: [dut]

TASK [aoscx_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/arubacx.j2] ***
changed: [dut]

TASK [file] ********************************************************************
changed: [dut -> localhost]

TASK [Attempt to load VRF kernel module] ***************************************
changed: [c1 -> localhost]
changed: [pe2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [pe2]
skipping: [c1]

TASK [include_tasks] ***********************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/deploy-config.yml for pe2, c1

TASK [template] ****************************************************************
changed: [pe2]
changed: [c1]

TASK [set_fact] ****************************************************************
ok: [pe2]
ok: [c1]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
changed: [pe2]
changed: [c1]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
skipping: [pe2]
skipping: [c1]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [c1]
ok: [pe2]
ok: [dut]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for c1, dut, pe2 => (item=bgp)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for c1, dut, pe2 => (item=ospf)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for c1, dut, pe2 => (item=vrf)

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [c1]
ok: [pe2]
ok: [dut]

TASK [Find configuration template for bgp] *************************************
skipping: [c1]
ok: [pe2]
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [c1]
ok: [pe2] => 
  msg: |-
    bgp configuration for pe2
    =========================================
    !
    router bgp 65101
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 10.0.0.3
    !
      neighbor 10.2.0.1 remote-as 65000
      neighbor 10.2.0.1 description dut
      neighbor 10.2.0.1 update-source lo
    !
      neighbor 2001:db8:4::1 remote-as 65000
      neighbor 2001:db8:4::1 description dut
      neighbor 2001:db8:4::1 update-source lo
    !
     address-family ipv4 unicast
    !
  
    !
      network 10.0.0.3/32
    !
    !
    !
      neighbor 10.2.0.1 activate
      no neighbor 10.2.0.1 send-community all
      neighbor 10.2.0.1 send-community standard
      neighbor 10.2.0.1 send-community large
    !
     address-family ipv6 unicast
    !
  
    !
      network 2001:db8:1:3::/64
    !
    !
    !
      neighbor 2001:db8:4::1 activate
      no neighbor 2001:db8:4::1 send-community all
      neighbor 2001:db8:4::1 send-community standard
      neighbor 2001:db8:4::1 send-community large
    !
    !
    !
    do write
ok: [dut] => 
  msg: |-
    bgp configuration for dut
    =========================================
    !
    !
    router bgp 65000
      bgp log-neighbor-changes
      timers bgp connect-retry 10
      bgp router-id 10.0.0.1
    !
      address-family ipv4 unicast
    !
  
        network 10.0.0.1/32
    !
    !
      address-family ipv6 unicast
    !
  
        network 2001:db8:1:1::/64
    !
    !
    !

TASK [Find configuration deployment deploy_script for bgp] *********************
skipping: [c1]
ok: [pe2]
ok: [dut]

TASK [Deploy bgp configuration] ************************************************
skipping: [c1]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for pe2

TASK [tempfile] ****************************************************************
changed: [dut -> localhost]

TASK [template] ****************************************************************
changed: [dut -> localhost]

TASK [aoscx_config: set session auto-confirm for bgp] **************************
changed: [dut]

TASK [aoscx_config: deploying bgp from /home/pipi/net101/tools/netsim/ansible/templates/bgp/arubacx.j2] ***
changed: [dut]

TASK [file] ********************************************************************
changed: [dut -> localhost]

TASK [template] ****************************************************************
changed: [pe2]

TASK [set_fact] ****************************************************************
ok: [pe2]

TASK [run /tmp/config.sh to deploy bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/frr.j2] ***
skipping: [pe2]

TASK [run vtysh to import bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/frr.j2] ***
changed: [pe2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [c1]
ok: [pe2]
ok: [dut]

TASK [Find configuration template for ospf] ************************************
ok: [c1]
ok: [pe2]
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    ospf configuration for dut
    =========================================
ok: [c1] => 
  msg: |-
    ospf configuration for c1
    =========================================
    !
    ! OSPFv2 FRR configuration
    !
    router ospf
     ospf router-id 10.0.0.2
     timers throttle spf 10 50 500
     timers throttle lsa all 100
     timers lsa min-arrival 100
  
  
    exit
    !
    interface lo
    !
     ip ospf area 0.0.0.0
    !
    interface eth1
    ! c1 -> dut
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
    interface eth2
    ! c1 -> pe2
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
  
    !
    ! OSPFv3 FRR configuration
    !
    interface lo
    !
     ipv6 ospf6 area 0.0.0.0
    !
    interface eth1
    ! c1 -> dut
     ipv6 ospf6 area 0.0.0.0
     ipv6 ospf6 network point-to-point
    !
    interface eth2
    ! c1 -> pe2
     ipv6 ospf6 area 0.0.0.0
     ipv6 ospf6 network point-to-point
    !
    !
    router ospf6
     ospf6 router-id 10.0.0.2
     timers lsa min-arrival 100
     timers throttle spf 10 50 500
  
  
    exit
  
    !
    do write
ok: [pe2] => 
  msg: |-
    ospf configuration for pe2
    =========================================
    !
    ! OSPFv2 FRR configuration
    !
    router ospf
     ospf router-id 10.0.0.3
     timers throttle spf 10 50 500
     timers throttle lsa all 100
     timers lsa min-arrival 100
  
  
    exit
    !
    interface lo
    !
     ip ospf area 0.0.0.0
    !
    interface eth1
    ! pe2 -> c1
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
  
    !
    ! OSPFv3 FRR configuration
    !
    interface lo
    !
     ipv6 ospf6 area 0.0.0.0
    !
    interface eth1
    ! pe2 -> c1
     ipv6 ospf6 area 0.0.0.0
     ipv6 ospf6 network point-to-point
    !
    !
    router ospf6
     ospf6 router-id 10.0.0.3
     timers lsa min-arrival 100
     timers throttle spf 10 50 500
  
  
    exit
  
    !
    do write

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [c1]
ok: [pe2]
ok: [dut]

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for c1, pe2
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for dut

TASK [template] ****************************************************************
changed: [pe2]
changed: [c1]

TASK [set_fact] ****************************************************************
ok: [c1]
ok: [pe2]

TASK [run /tmp/config.sh to deploy ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/frr.j2] ***
skipping: [c1]
skipping: [pe2]

TASK [run vtysh to import ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/frr.j2] ***
changed: [pe2]
changed: [c1]

TASK [tempfile] ****************************************************************
changed: [dut -> localhost]

TASK [template] ****************************************************************
changed: [dut -> localhost]

TASK [aoscx_config: set session auto-confirm for ospf] *************************
changed: [dut]

TASK [aoscx_config: deploying ospf from /home/pipi/net101/tools/netsim/ansible/templates/ospf/arubacx.j2] ***
ok: [dut]

TASK [file] ********************************************************************
changed: [dut -> localhost]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [c1]
ok: [pe2]
ok: [dut]

TASK [Find configuration template for vrf] *************************************
skipping: [c1]
skipping: [pe2]
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [c1]
skipping: [pe2]
ok: [dut] => 
  msg: |-
    vrf configuration for dut
    =========================================
  
    !
    router ospf 2 vrf tenant
        router-id 10.0.0.1
  
  
  
     redistribute bgp
     redistribute connected
  
  
        area 0.0.0.0
        area 0.0.0.0
        area 0.0.0.0
  
    !
    interface 1/1/1
    ! dut -> c1
        ip ospf 2 area 0.0.0.0
        ip ospf network point-to-point
    !
    interface 1/1/2
    ! dut -> stub
        ip ospf 2 area 0.0.0.0
        ip ospf passive
    !
    interface loopback 1
    ! VRF Loopback tenant
        ip ospf 2 area 0.0.0.0
    !
  
    !
    router ospfv3 2 vrf tenant
        router-id 10.0.0.1
  
  
  
     redistribute bgp
     redistribute connected
  
  
        area 0.0.0.0
        area 0.0.0.0
        area 0.0.0.0
  
    !
    interface 1/1/1
    ! dut -> c1
        ipv6 ospfv3 2 area 0.0.0.0
        ipv6 ospfv3 network point-to-point
    !
    interface 1/1/2
    ! dut -> stub
        ipv6 ospfv3 2 area 0.0.0.0
        ipv6 ospfv3 passive
    !
    interface loopback 1
    ! VRF Loopback tenant
        ipv6 ospfv3 2 area 0.0.0.0
    !
  
  
    !
    router bgp 65000
      vrf tenant
      bgp router-id 10.0.0.1
  
      neighbor 10.0.0.3 remote-as 65101
      neighbor 10.0.0.3 description pe2
      neighbor 10.0.0.3 update-source loopback 1
  
      neighbor 2001:db8:1:3::1 remote-as 65101
      neighbor 2001:db8:1:3::1 description pe2
      neighbor 2001:db8:1:3::1 update-source loopback 1
  
  
     address-family ipv4 unicast
      redistribute local loopback
      redistribute connected
      redistribute ospf
    !
        network 10.2.0.1/32
    !
        neighbor 10.0.0.3 activate
        neighbor 10.0.0.3 advertisement-interval 1
        neighbor 10.0.0.3 send-community standard
  
     address-family ipv6 unicast
      redistribute local loopback
      redistribute connected
      redistribute ospfv3
    !
        network 2001:db8:4::/64
    !
        neighbor 2001:db8:1:3::1 activate
        neighbor 2001:db8:1:3::1 advertisement-interval 1
        neighbor 2001:db8:1:3::1 send-community standard

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [c1]
skipping: [pe2]
ok: [dut]

TASK [Deploy vrf configuration] ************************************************
skipping: [c1]
skipping: [pe2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for dut

TASK [tempfile] ****************************************************************
changed: [dut -> localhost]

TASK [template] ****************************************************************
changed: [dut -> localhost]

TASK [aoscx_config: set session auto-confirm for vrf] **************************
changed: [dut]

TASK [aoscx_config: deploying vrf from /home/pipi/net101/tools/netsim/ansible/templates/vrf/arubacx.j2] ***
changed: [dut]

TASK [file] ********************************************************************
changed: [dut -> localhost]

PLAY [Deploy custom deployment templates] **************************************

TASK [Run custom configuration deployment scripts] *****************************
skipping: [dut] => (item=bgp.session) 
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-custom-config.yml for dut, pe2 => (item=ebgp.multihop)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-custom-config.yml for pe2 => (item=bgp.session)

TASK [Find configuration template] *********************************************
ok: [pe2]
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [pe2]

TASK [Check is the configuration template is a file] ***************************
ok: [dut -> localhost]
ok: [pe2 -> localhost]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [pe2]

TASK [Process template /home/pipi/net101/tools/netsim/extra/ebgp.multihop/arubacx.j2 for dut] ***
skipping: [pe2]
skipping: [dut]

TASK [Find custom configuration deployment script] *****************************
ok: [pe2]
ok: [dut]

TASK [Run the configuration deployment script] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for pe2

TASK [tempfile] ****************************************************************
changed: [dut -> localhost]

TASK [template] ****************************************************************
changed: [dut -> localhost]

TASK [aoscx_config: set session auto-confirm for ebgp.multihop] ****************
changed: [dut]

TASK [aoscx_config: deploying ebgp.multihop from /home/pipi/net101/tools/netsim/extra/ebgp.multihop/arubacx.j2] ***
changed: [dut]

TASK [file] ********************************************************************
changed: [dut -> localhost]

TASK [template] ****************************************************************
changed: [pe2]

TASK [set_fact] ****************************************************************
ok: [pe2]

TASK [run /tmp/config.sh to deploy ebgp.multihop config from /home/pipi/net101/tools/netsim/extra/ebgp.multihop/frr.j2] ***
skipping: [pe2]

TASK [run vtysh to import ebgp.multihop config from /home/pipi/net101/tools/netsim/extra/ebgp.multihop/frr.j2] ***
changed: [pe2]

TASK [Find configuration template] *********************************************
ok: [pe2]

TASK [fail] ********************************************************************
skipping: [pe2]

TASK [Check is the configuration template is a file] ***************************
ok: [pe2 -> localhost]

TASK [fail] ********************************************************************
skipping: [pe2]

TASK [Process template /home/pipi/net101/tools/netsim/extra/bgp.session/frr.j2 for pe2] ***
skipping: [pe2]

TASK [Find custom configuration deployment script] *****************************
ok: [pe2]

TASK [Run the configuration deployment script] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for pe2

TASK [template] ****************************************************************
changed: [pe2]

TASK [set_fact] ****************************************************************
ok: [pe2]

TASK [run /tmp/config.sh to deploy bgp.session config from /home/pipi/net101/tools/netsim/extra/bgp.session/frr.j2] ***
changed: [pe2]

TASK [run vtysh to import bgp.session config from /home/pipi/net101/tools/netsim/extra/bgp.session/frr.j2] ***
skipping: [pe2]

PLAY RECAP *********************************************************************
c1                         : ok=27   changed=5    unreachable=0    failed=0    skipped=12   rescued=0    ignored=0   
dut                        : ok=57   changed=24   unreachable=0    failed=0    skipped=4    rescued=0    ignored=0   
pe2                        : ok=50   changed=11   unreachable=0    failed=0    skipped=17   rescued=0    ignored=0   



Use this topology to test the VRF EBGP multihop implementation