[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h4] ok: [h2] ok: [s1] ok: [h3] ok: [s2] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [s1] ok: [h3] ok: [h2] ok: [h4] ok: [s2] TASK [Wait for device to become ready] ***************************************** skipping: [s1] skipping: [s2] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for s1, s2, h1, h2, h3, h4 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [s1] ok: [h4] ok: [s2] ok: [h3] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [s1] ok: [h2] ok: [h4] ok: [s2] ok: [h3] TASK [Print deployed configuration when running in verbose mode] *************** ok: [s1] => msg: |- initial configuration for s1 ========================================= hostname s1 ! lldp ! ! vlan 1001 name blue ! vlan 1000 name red ! ! ! interface loopback 0 ip address 10.0.0.5/32 ! interface mgmt no lldp transmit no lldp receive ! interface 1/1/1 shutdown mtu 9198 ip mtu 1600 description s1 -> s2 ip address 10.1.0.1/30 no shutdown ! interface 1/1/2 shutdown mtu 9198 no shutdown ! interface 1/1/3 shutdown mtu 9198 no shutdown ! interface vlan1000 description VLAN red (1000) -> [h1,h2,s2] [external] ip address 172.16.0.5/24 ! interface vlan1001 description VLAN blue (1001) -> [h3,h4,s2] [external] ip address 172.16.1.5/24 ! ! ok: [s2] => msg: |- initial configuration for s2 ========================================= hostname s2 ! lldp ! ! vlan 1001 name blue ! vlan 1000 name red ! ! ! interface loopback 0 ip address 10.0.0.6/32 ! interface mgmt no lldp transmit no lldp receive ! interface 1/1/1 shutdown mtu 9198 ip mtu 1600 description s2 -> s1 ip address 10.1.0.2/30 no shutdown ! interface 1/1/2 shutdown mtu 9198 no shutdown ! interface 1/1/3 shutdown mtu 9198 no shutdown ! interface vlan1000 description VLAN red (1000) -> [h1,s1,h2] [external] ip address 172.16.0.6/24 ! interface vlan1001 description VLAN blue (1001) -> [h3,s1,h4] [external] ip address 172.16.1.6/24 ! ! ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.0.1/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.1/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.0.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.0.5 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.0.5 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.0.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.0.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.0.5 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.0.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.0.5 # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.0.2/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.2/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.0.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.0.6 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.0.6 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.0.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.0.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.0.6 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.0.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.0.6 # # Print the final routing table ip route ok: [h4] => msg: |- initial configuration for h4 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.1.4/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.4/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.1.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.1.6 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.1.6 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.1.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.1.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.1.6 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.1.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.1.6 # # Print the final routing table ip route ok: [h3] => msg: |- initial configuration for h3 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.1.3/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.3/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.1.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.1.5 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.1.5 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.1.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.1.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.1.5 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.1.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.1.5 # # Print the final routing table ip route TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h3] ok: [s1] ok: [s2] ok: [h2] ok: [h4] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for s1, s2 included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2, h3, h4 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [template] **************************************************************** changed: [s2 -> localhost] changed: [s1 -> localhost] TASK [aoscx_config: set session auto-confirm for initial] ********************** changed: [s2] changed: [s1] TASK [aoscx_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/arubacx.j2] *** changed: [s2] changed: [s1] TASK [file] ******************************************************************** changed: [s2 -> localhost] changed: [s1 -> localhost] TASK [set_fact] **************************************************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h1 -> localhost] changed: [h4 -> localhost] TASK [Initial container configuration via /tmp/config-ZNkGajbX-h1.sh] ********** changed: [h1 -> localhost] changed: [h4 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] TASK [file] ******************************************************************** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [s1] ok: [s2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=vlan) included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=ospf) included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=vxlan) TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [s1] ok: [s2] TASK [Find configuration template for vlan] ************************************ ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [s1] => msg: |- vlan configuration for s1 ========================================= ! ! interface 1/1/2 no routing vlan access 1000 ! interface 1/1/3 no routing vlan access 1001 ! interface vlan1000 ! interface vlan1001 ok: [s2] => msg: |- vlan configuration for s2 ========================================= ! ! interface 1/1/2 no routing vlan access 1000 ! interface 1/1/3 no routing vlan access 1001 ! interface vlan1000 ! interface vlan1001 TASK [Find configuration deployment deploy_script for vlan] ******************** ok: [s1] ok: [s2] TASK [Deploy vlan configuration] *********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for s1, s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [aoscx_config: set session auto-confirm for vlan] ************************* changed: [s2] changed: [s1] TASK [aoscx_config: deploying vlan from /home/pipi/net101/tools/netsim/ansible/templates/vlan/arubacx.j2] *** changed: [s1] changed: [s2] TASK [file] ******************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [Figure out whether to deploy the module ospf on current device] ********** ok: [s1] ok: [s2] TASK [Find configuration template for ospf] ************************************ ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [s1] => msg: |- ospf configuration for s1 ========================================= ! router ospf 1 router-id 10.0.0.5 area 0.0.0.0 area 0.0.0.0 ! interface loopback 0 ip ospf 1 area 0.0.0.0 ! interface 1/1/1 ! s1 -> s2 ip ospf 1 area 0.0.0.0 ip ospf network point-to-point ! ok: [s2] => msg: |- ospf configuration for s2 ========================================= ! router ospf 1 router-id 10.0.0.6 area 0.0.0.0 area 0.0.0.0 ! interface loopback 0 ip ospf 1 area 0.0.0.0 ! interface 1/1/1 ! s2 -> s1 ip ospf 1 area 0.0.0.0 ip ospf network point-to-point ! TASK [Find configuration deployment deploy_script for ospf] ******************** ok: [s1] ok: [s2] TASK [Deploy ospf configuration] *********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for s1, s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [aoscx_config: set session auto-confirm for ospf] ************************* changed: [s1] changed: [s2] TASK [aoscx_config: deploying ospf from /home/pipi/net101/tools/netsim/ansible/templates/ospf/arubacx.j2] *** changed: [s2] changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [Figure out whether to deploy the module vxlan on current device] ********* ok: [s1] ok: [s2] TASK [Find configuration template for vxlan] *********************************** ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [s1] => msg: |- vxlan configuration for s1 ========================================= ! interface vxlan 1 source ip 10.0.0.5 no shutdown vni 101000 vlan 1000 vtep-peer 10.0.0.6 vni 101001 vlan 1001 vtep-peer 10.0.0.6 ok: [s2] => msg: |- vxlan configuration for s2 ========================================= ! interface vxlan 1 source ip 10.0.0.6 no shutdown vni 101000 vlan 1000 vtep-peer 10.0.0.5 vni 101001 vlan 1001 vtep-peer 10.0.0.5 TASK [Find configuration deployment deploy_script for vxlan] ******************* ok: [s1] ok: [s2] TASK [Deploy vxlan configuration] ********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for s1, s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [template] **************************************************************** changed: [s2 -> localhost] changed: [s1 -> localhost] TASK [aoscx_config: set session auto-confirm for vxlan] ************************ changed: [s1] changed: [s2] TASK [aoscx_config: deploying vxlan from /home/pipi/net101/tools/netsim/ansible/templates/vxlan/arubacx.j2] *** changed: [s2] changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] changed: [s2 -> localhost] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h2 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h3 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h4 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 s1 : ok=47 changed=20 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 s2 : ok=47 changed=20 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 The devices under test are VLAN-to-VXLAN layer-3 switches between two access VLANs and two VXLAN VNIs. Both switches perform inter-VLAN bridging, resulting in asymmetrical IRB. All hosts should be able to ping each other and all switch loopback IPs Please note it might take a while for the lab to work due to STP learning phase.