[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h4] ok: [h3] ok: [s1] ok: [s2] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [s1] ok: [h3] ok: [s2] ok: [h4] TASK [Wait for device to become ready] ***************************************** skipping: [s1] skipping: [s2] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for s1, s2, h1, h2, h3, h4 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [h4] ok: [h3] ok: [s1] ok: [s2] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h3] ok: [h2] ok: [s1] ok: [h4] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.31.1.2/24 dev eth1 2>/dev/null set -e ip addr add 172.31.1.2/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.31.1.1/24 dev eth1 2>/dev/null set -e ip addr add 172.31.1.1/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [s1] => msg: |- initial configuration for s1 ========================================= hostname s1 ! no ip domain lookup ! lldp run ! ip host h1 172.31.1.1 ip host h2 172.31.1.2 ip host h3 172.31.1.3 ip host h4 172.31.1.4 ip host s2 10.0.0.6 ! ip routing ! ! ! interface Loopback0 ip address 10.0.0.5 255.255.255.255 ! interface GigabitEthernet1 no lldp transmit no lldp receive ! interface GigabitEthernet2 no shutdown description s1 -> s2 ! interface GigabitEthernet3 no shutdown description [Access VLAN red] s1 -> h1 ! interface GigabitEthernet4 no shutdown description [Access VLAN blue] s1 -> h3 ! interface BDI700 no shutdown description VLAN red (700) -> [s2,h1,h2] ! interface BDI701 no shutdown description VLAN blue (701) -> [h3,s2,h4] ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming ok: [h3] => msg: |- initial configuration for h3 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.31.1.3/24 dev eth1 2>/dev/null set -e ip addr add 172.31.1.3/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [h4] => msg: |- initial configuration for h4 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.31.1.4/24 dev eth1 2>/dev/null set -e ip addr add 172.31.1.4/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [s2] => msg: |- initial configuration for s2 ========================================= hostname s2 ! no ip domain lookup ! lldp run ! ip host h1 172.31.1.1 ip host h2 172.31.1.2 ip host h3 172.31.1.3 ip host h4 172.31.1.4 ip host s1 10.0.0.5 ! ip routing ! ! ! interface Loopback0 ip address 10.0.0.6 255.255.255.255 ! interface GigabitEthernet1 no lldp transmit no lldp receive ! interface GigabitEthernet2 no shutdown description s2 -> s1 ! interface GigabitEthernet3 no shutdown description [Access VLAN red] s2 -> h2 ! interface GigabitEthernet4 no shutdown description [Access VLAN blue] s2 -> h4 ! interface BDI700 no shutdown description VLAN red (700) -> [s1,h1,h2] ! interface BDI701 no shutdown description VLAN blue (701) -> [h3,s1,h4] ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h3] ok: [h1] ok: [h2] ok: [s1] ok: [h4] ok: [s2] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for s1, s2 included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2, h3, h4 TASK [ios_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/ios.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [s1] changed: [s2] TASK [set_fact] **************************************************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] changed: [h1 -> localhost] TASK [Initial container configuration via /tmp/config-NTvRarJG-h1.sh] ********** changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] changed: [h1 -> localhost] TASK [file] ******************************************************************** changed: [h1 -> localhost] changed: [h4 -> localhost] changed: [h3 -> localhost] changed: [h2 -> localhost] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [s1] ok: [s2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=vlan) TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [s1] ok: [s2] TASK [Find configuration template for vlan] ************************************ ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [s1] => msg: |- vlan configuration for s1 ========================================= ! bridge-domain 701 member GigabitEthernet2 service-instance 701 member GigabitEthernet4 service-instance 701 ! bridge-domain 700 member GigabitEthernet2 service-instance 700 member GigabitEthernet3 service-instance 700 ! interface GigabitEthernet2 service instance 701 ethernet encapsulation dot1q 701 rewrite ingress tag pop 1 rewrite egress tag push dot1q 701 service instance 700 ethernet encapsulation untagged ! interface GigabitEthernet3 service instance 700 ethernet encapsulation untagged ! interface GigabitEthernet4 service instance 701 ethernet encapsulation untagged ok: [s2] => msg: |- vlan configuration for s2 ========================================= ! bridge-domain 701 member GigabitEthernet2 service-instance 701 member GigabitEthernet4 service-instance 701 ! bridge-domain 700 member GigabitEthernet2 service-instance 700 member GigabitEthernet3 service-instance 700 ! interface GigabitEthernet2 service instance 701 ethernet encapsulation dot1q 701 rewrite ingress tag pop 1 rewrite egress tag push dot1q 701 service instance 700 ethernet encapsulation untagged ! interface GigabitEthernet3 service instance 700 ethernet encapsulation untagged ! interface GigabitEthernet4 service instance 701 ethernet encapsulation untagged TASK [Find configuration deployment deploy_script for vlan] ******************** ok: [s1] ok: [s2] TASK [Deploy vlan configuration] *********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for s1, s2 TASK [ios_config: deploying vlan from /home/pipi/net101/tools/netsim/ansible/templates/vlan/csr.j2] *** changed: [s2] changed: [s1] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h2 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h3 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h4 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 s1 : ok=17 changed=2 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 s2 : ok=17 changed=2 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 The devices under test are simple bridges with a VLAN trunk between them. One of the trunk members is a native VLAN. Both VLANs are using the same IP prefix to identify potential inter-VLAN leaking. * h1 and h2 should be able to ping each other * h3 and h4 should be able to ping each other * h1 should not be able to reach h3 Please note it might take a while for the lab to work due to STP learning phase