Warning in ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
... Ansible core version 2.19 introduced breaking changes in templates and playbooks
... We tested netlab core with Ansible version 12.x but not every device template
... You might want to downgrade Ansible to version 11.10 or lower.
... Use 'netlab install ansible' on Ubuntu to do that
... Finally, please open a GitHub issue if you experience errors/crashes
... Set defaults.ansible.warnings.ver12 to False to hide this warning
 [INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[CREATED] r1: initial,vlan,ospf,vrf
[CREATED] r2: initial,vlan,ospf,vrf
[CREATED] r3: initial,vlan,ospf,vrf
[CREATED] h1: initial,routing
[CREATED] h2: initial,routing
[CREATED] h3: initial,routing
[CREATED] h4: initial,routing
[CREATED] h5: initial,routing
 [INFO] Executing initial configuration for node h1 (namespace clab-
          ml_17-h1)
 [INFO] Executing routing configuration for node h1 (namespace clab-
          ml_17-h1)
 [INFO] Executing initial configuration for node h2 (namespace clab-
          ml_17-h2)
 [INFO] Executing routing configuration for node h2 (namespace clab-
          ml_17-h2)
 [INFO] Executing initial configuration for node h3 (namespace clab-
          ml_17-h3)
 [INFO] Executing routing configuration for node h3 (namespace clab-
          ml_17-h3)
 [INFO] Executing initial configuration for node h4 (namespace clab-
          ml_17-h4)
 [INFO] Executing routing configuration for node h4 (namespace clab-
          ml_17-h4)
 [INFO] Executing initial configuration for node h5 (namespace clab-
          ml_17-h5)
 [INFO] Executing routing configuration for node h5 (namespace clab-
          ml_17-h5)

 [INFO] Starting Ansible playbook to deploy the rest of the
          configurations
[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned
[WARNING]: Found variable using reserved name 'hosts'.
Origin: /work/netlab_cicd/group_vars/all/topology.yml:157:1

155     ipv4: 10.2.0.0/24
156     prefix: 32
157 hosts:
    ^ column 1


PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [r2]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]
ok: [h5]
ok: [r1]
ok: [r3]

TASK [Generic readiness tests] *************************************************
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [h1]
skipping: [h2]
skipping: [h3]
skipping: [h4]
skipping: [h5]

TASK [Find device readiness script] ********************************************
ok: [r2]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]
ok: [h5]
ok: [r1]
ok: [r3]

TASK [Wait for device to become ready] *****************************************
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [h1]
skipping: [h2]
skipping: [h3]
skipping: [h4]
skipping: [h5]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h5

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r1]

TASK [Find configuration template for normalize] *******************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy normalize configuration] ******************************************
skipping: [r1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r2]

TASK [Find configuration template for normalize] *******************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy normalize configuration] ******************************************
skipping: [r2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r3]

TASK [Find configuration template for normalize] *******************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy normalize configuration] ******************************************
skipping: [r3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h1]

TASK [Find configuration template for normalize] *******************************
ok: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy normalize configuration] ******************************************
skipping: [h1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h2]

TASK [Find configuration template for normalize] *******************************
ok: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy normalize configuration] ******************************************
skipping: [h2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h3]

TASK [Find configuration template for normalize] *******************************
ok: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy normalize configuration] ******************************************
skipping: [h3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h4]

TASK [Find configuration template for normalize] *******************************
ok: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy normalize configuration] ******************************************
skipping: [h4]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h5]

TASK [Find configuration template for normalize] *******************************
ok: [h5]

TASK [fail] ********************************************************************
skipping: [h5]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h5]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h5]

TASK [Deploy normalize configuration] ******************************************
skipping: [h5]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h5

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r1]

TASK [Find configuration template for initial] *********************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "initial configuration for r1\n=========================================\nhostname r1\n!\nno ip domain lookup\nlogging buffered 256000\n\n!\nlldp run\n!\nip host h1 172.16.0.4\nip host h2 172.16.1.5\nip host h3 172.16.3.6\nip host h4 172.16.4.7\nip host h5 172.16.2.8\nip host r1-red 172.16.0.1 172.16.2.1 10.1.0.5\nip host r1-blue 172.16.3.1 10.1.0.1\nip host r2 10.0.0.2\nip host r2-blue 10.1.0.2 10.1.0.9\nip host r2-red 10.1.0.6 10.1.0.13\nip host r3 10.0.0.3\nip host r3-red 172.16.1.3 10.1.0.14\nip host r3-blue 172.16.4.3 10.1.0.10\n!\nip routing\n!\nno ipv6 unicast-routing\n!\nvrf definition red\n rd 65000:1\n route-target import 65000:1\n route-target export 65000:1\n!\n address-family ipv4\n exit-address-family\n!\nvrf definition blue\n rd 65000:2\n route-target import 65000:2\n route-target export 65000:2\n!\n address-family ipv4\n exit-address-family\n!\n\n!\n\n!\n!\ninterface Loopback0\n ip address 10.0.0.1 255.255.255.255\n!\ninterface GigabitEthernet1\n no lldp transmit\n no lldp receive\n!\ninterface GigabitEthernet2\n description r1 -> r2\n no shutdown\n!\ninterface GigabitEthernet3\n vrf forwarding red\n description r1 -> h1 [stub]\n ip address 172.16.0.1 255.255.255.0\n no shutdown\n!\ninterface GigabitEthernet4\n vrf forwarding red\n description r1 -> h5 [stub]\n ip address 172.16.2.1 255.255.255.0\n no shutdown\n!\ninterface GigabitEthernet5\n vrf forwarding blue\n description r1 -> h3 [stub]\n ip address 172.16.3.1 255.255.255.0\n no shutdown\n!\ninterface GigabitEthernet2.1\n encapsulation dot1Q 701\n vrf forwarding blue\n description r1 -> r2\n ip address 10.1.0.1 255.255.255.252\n no shutdown\n!\ninterface GigabitEthernet2.2\n encapsulation dot1Q 700\n vrf forwarding red\n description r1 -> r2\n ip address 10.1.0.5 255.255.255.252\n no shutdown\n!\n!\nline vty 0 4\n exec-timeout 0 0 \n!\nno banner exec\nno banner login\nno banner incoming\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/ios.yml for r1

TASK [ios_config: deploying initial from /work/netlab_cicd/node_files/r1/initial] ***
[WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation
changed: [r1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r2]

TASK [Find configuration template for initial] *********************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "initial configuration for r2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r2\n!\nlog file /tmp/logging\n\n!\nip forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.2/32\n!\ninterface eth1\n no shutdown\n description r2 -> r1\n ! no ip address\n!\ninterface eth2\n no shutdown\n description r2 -> r3\n ! no ip address\n!\ninterface eth1.701\n no shutdown\n description r2 -> r1\n ip address 10.1.0.2/30\n!\ninterface eth1.700\n no shutdown\n description r2 -> r1\n ip address 10.1.0.6/30\n!\ninterface eth2.701\n no shutdown\n description r2 -> r3\n ip address 10.1.0.9/30\n!\ninterface eth2.700\n no shutdown\n description r2 -> r3\n ip address 10.1.0.13/30\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r2

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/r2/initial] ***
changed: [r2]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/r2/initial] ***
skipping: [r2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r3]

TASK [Find configuration template for initial] *********************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r3] => {
    "msg": "initial configuration for r3\n=========================================\nhostname r3\n!\nno ip domain lookup\nlogging buffered 256000\n\n!\nlldp run\n!\nip host h1 172.16.0.4\nip host h2 172.16.1.5\nip host h3 172.16.3.6\nip host h4 172.16.4.7\nip host h5 172.16.2.8\nip host r1 10.0.0.1\nip host r1-red 172.16.0.1 172.16.2.1 10.1.0.5\nip host r1-blue 172.16.3.1 10.1.0.1\nip host r2 10.0.0.2\nip host r2-blue 10.1.0.2 10.1.0.9\nip host r2-red 10.1.0.6 10.1.0.13\nip host r3-red 172.16.1.3 10.1.0.14\nip host r3-blue 172.16.4.3 10.1.0.10\n!\nip routing\n!\nno ipv6 unicast-routing\n!\nvrf definition red\n rd 65000:1\n route-target import 65000:1\n route-target export 65000:1\n!\n address-family ipv4\n exit-address-family\n!\nvrf definition blue\n rd 65000:2\n route-target import 65000:2\n route-target export 65000:2\n!\n address-family ipv4\n exit-address-family\n!\n\n!\n\n!\n!\ninterface Loopback0\n ip address 10.0.0.3 255.255.255.255\n!\ninterface GigabitEthernet1\n no lldp transmit\n no lldp receive\n!\ninterface GigabitEthernet2\n description r3 -> r2\n no shutdown\n!\ninterface GigabitEthernet3\n vrf forwarding red\n description r3 -> h2 [stub]\n ip address 172.16.1.3 255.255.255.0\n no shutdown\n!\ninterface GigabitEthernet4\n vrf forwarding blue\n description r3 -> h4 [stub]\n ip address 172.16.4.3 255.255.255.0\n no shutdown\n!\ninterface GigabitEthernet2.1\n encapsulation dot1Q 701\n vrf forwarding blue\n description r3 -> r2\n ip address 10.1.0.10 255.255.255.252\n no shutdown\n!\ninterface GigabitEthernet2.2\n encapsulation dot1Q 700\n vrf forwarding red\n description r3 -> r2\n ip address 10.1.0.14 255.255.255.252\n no shutdown\n!\n!\nline vty 0 4\n exec-timeout 0 0 \n!\nno banner exec\nno banner login\nno banner incoming\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/ios.yml for r3

TASK [ios_config: deploying initial from /work/netlab_cicd/node_files/r3/initial] ***
changed: [r3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h1]

TASK [Find configuration template for initial] *********************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy initial configuration] ********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h2]

TASK [Find configuration template for initial] *********************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy initial configuration] ********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h3]

TASK [Find configuration template for initial] *********************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy initial configuration] ********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h4]

TASK [Find configuration template for initial] *********************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy initial configuration] ********************************************
skipping: [h4]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h5]

TASK [Find configuration template for initial] *********************************
skipping: [h5]

TASK [fail] ********************************************************************
skipping: [h5]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h5]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h5]

TASK [Deploy initial configuration] ********************************************
skipping: [h5]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [r2]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]
ok: [h5]
ok: [r1]
ok: [r3]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h5 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h5 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h5 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h5 => (item=vrf)

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [r1]

TASK [Find configuration template for vlan] ************************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "vlan configuration for r1\n=========================================\n!\nbridge-domain 700\n!\nbridge-domain 701\n!\ninterface GigabitEthernet2.1\n encapsulation dot1Q 701\n!\ninterface GigabitEthernet2.2\n encapsulation dot1Q 700\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/ios.yml for r1

TASK [ios_config: deploying vlan from /work/netlab_cicd/node_files/r1/vlan] ****
changed: [r1]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [r1]

TASK [Find configuration template for routing] *********************************
skipping: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy routing configuration] ********************************************
skipping: [r1]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r1]

TASK [Find configuration template for ospf] ************************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "ospf configuration for r1\n=========================================\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/ios.yml for r1

TASK [ios_config: deploying ospf from /work/netlab_cicd/node_files/r1/ospf] ****
ok: [r1]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r1]

TASK [Find configuration template for vrf] *************************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for vrf] *********************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "vrf configuration for r1\n=========================================\nrouter ospf 100 vrf red\n router-id 10.0.0.1\n passive-interface GigabitEthernet3\n passive-interface GigabitEthernet4\n\n redistribute connected\n\n!\ninterface GigabitEthernet3\n! r1 -> h1\n ip ospf 100 area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface GigabitEthernet4\n! r1 -> h5\n ip ospf 100 area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface GigabitEthernet2.2\n! r1 -> r2\n ip ospf 100 area 0.0.0.0\n ip ospf network point-to-point\n!\n\nrouter ospf 101 vrf blue\n router-id 10.0.0.1\n passive-interface GigabitEthernet5\n\n redistribute connected\n\n!\ninterface GigabitEthernet5\n! r1 -> h3\n ip ospf 101 area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface GigabitEthernet2.1\n! r1 -> r2\n ip ospf 101 area 0.0.0.0\n ip ospf network point-to-point\n!\n\n"
}

TASK [Deploy vrf configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/ios.yml for r1

TASK [ios_config: deploying vrf from /work/netlab_cicd/node_files/r1/vrf] ******
changed: [r1]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [r2]

TASK [Find configuration template for vlan] ************************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "vlan configuration for r2\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\nif [ ! -e /sys/devices/virtual/net/eth1.701 ]; then\n  ip link add link eth1 name eth1.701 type vlan id 701\n  ip link set dev eth1.701 up\nfi\nif [ ! -e /sys/devices/virtual/net/eth1.700 ]; then\n  ip link add link eth1 name eth1.700 type vlan id 700\n  ip link set dev eth1.700 up\nfi\nif [ ! -e /sys/devices/virtual/net/eth2.701 ]; then\n  ip link add link eth2 name eth2.701 type vlan id 701\n  ip link set dev eth2.701 up\nfi\nif [ ! -e /sys/devices/virtual/net/eth2.700 ]; then\n  ip link add link eth2 name eth2.700 type vlan id 700\n  ip link set dev eth2.700 up\nfi\n\n\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy vlan config from /work/netlab_cicd/node_files/r2/vlan] ***
changed: [r2]

TASK [run vtysh to import vlan config from /work/netlab_cicd/node_files/r2/vlan] ***
skipping: [r2]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [r2]

TASK [Find configuration template for routing] *********************************
skipping: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy routing configuration] ********************************************
skipping: [r2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r2]

TASK [Find configuration template for ospf] ************************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "ospf configuration for r2\n=========================================\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/node_files/r2/ospf] ***
skipping: [r2]

TASK [run vtysh to import ospf config from /work/netlab_cicd/node_files/r2/ospf] ***
changed: [r2]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r2]

TASK [Find configuration template for vrf] *************************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for vrf] *********************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "vrf configuration for r2\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\n\n# Create VRF tables\nif [ ! -e /sys/devices/virtual/net/blue ]; then\nip link add blue type vrf table 101\nfi\nip link set blue up\nif [ ! -e /sys/devices/virtual/net/red ]; then\nip link add red type vrf table 100\nfi\nip link set red up\n\n# Move interfaces and loopbacks to vrfs\nsysctl -qw net.ipv6.conf.eth1.701.keep_addr_on_down=1\nip link set eth1.701 master blue\nsysctl -qw net.ipv6.conf.eth1.700.keep_addr_on_down=1\nip link set eth1.700 master red\nsysctl -qw net.ipv6.conf.eth2.701.keep_addr_on_down=1\nip link set eth2.701 master blue\nsysctl -qw net.ipv6.conf.eth2.700.keep_addr_on_down=1\nip link set eth2.700 master red\n\ncat >/tmp/vrf_config <<CONFIG\nvrf blue\n exit-vrf\nvrf red\n exit-vrf\n!\nrouter bgp 65000\n!\n!\n!\n! OSPFv2 FRR configuration\n!\nrouter ospf vrf blue\n ospf router-id 10.0.0.2\n timers throttle spf 10 50 500\n timers throttle lsa all 100\n timers lsa min-arrival 100\n\n redistribute connected\n\nexit\n!\ninterface eth1.701\n! r2 -> r1\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface eth2.701\n! r2 -> r3\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n!\n!\n! OSPFv2 FRR configuration\n!\nrouter ospf vrf red\n ospf router-id 10.0.0.2\n timers throttle spf 10 50 500\n timers throttle lsa all 100\n timers lsa min-arrival 100\n\n redistribute connected\n\nexit\n!\ninterface eth1.700\n! r2 -> r1\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface eth2.700\n! r2 -> r3\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n!\ndo write\n!\nCONFIG\nvtysh -f /tmp/vrf_config\nexit $?\n"
}

TASK [Deploy vrf configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy vrf config from /work/netlab_cicd/node_files/r2/vrf] ***
changed: [r2]

TASK [run vtysh to import vrf config from /work/netlab_cicd/node_files/r2/vrf] ***
skipping: [r2]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [r3]

TASK [Find configuration template for vlan] ************************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r3] => {
    "msg": "vlan configuration for r3\n=========================================\n!\nbridge-domain 700\n!\nbridge-domain 701\n!\ninterface GigabitEthernet2.1\n encapsulation dot1Q 701\n!\ninterface GigabitEthernet2.2\n encapsulation dot1Q 700\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/ios.yml for r3

TASK [ios_config: deploying vlan from /work/netlab_cicd/node_files/r3/vlan] ****
changed: [r3]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [r3]

TASK [Find configuration template for routing] *********************************
skipping: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy routing configuration] ********************************************
skipping: [r3]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r3]

TASK [Find configuration template for ospf] ************************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r3] => {
    "msg": "ospf configuration for r3\n=========================================\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/ios.yml for r3

TASK [ios_config: deploying ospf from /work/netlab_cicd/node_files/r3/ospf] ****
ok: [r3]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r3]

TASK [Find configuration template for vrf] *************************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for vrf] *********************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r3] => {
    "msg": "vrf configuration for r3\n=========================================\nrouter ospf 100 vrf red\n router-id 10.0.0.3\n passive-interface GigabitEthernet3\n\n redistribute connected\n\n!\ninterface GigabitEthernet3\n! r3 -> h2\n ip ospf 100 area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface GigabitEthernet2.2\n! r3 -> r2\n ip ospf 100 area 0.0.0.0\n ip ospf network point-to-point\n!\n\nrouter ospf 101 vrf blue\n router-id 10.0.0.3\n passive-interface GigabitEthernet4\n\n redistribute connected\n\n!\ninterface GigabitEthernet4\n! r3 -> h4\n ip ospf 101 area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface GigabitEthernet2.1\n! r3 -> r2\n ip ospf 101 area 0.0.0.0\n ip ospf network point-to-point\n!\n\n"
}

TASK [Deploy vrf configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/ios.yml for r3

TASK [ios_config: deploying vrf from /work/netlab_cicd/node_files/r3/vrf] ******
changed: [r3]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h1]

TASK [Find configuration template for vlan] ************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h1]

TASK [Find configuration template for routing] *********************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy routing configuration] ********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h1]

TASK [Find configuration template for ospf] ************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [h1]

TASK [Find configuration template for vrf] *************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy vrf configuration] ************************************************
skipping: [h1]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h2]

TASK [Find configuration template for vlan] ************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h2]

TASK [Find configuration template for routing] *********************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy routing configuration] ********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h2]

TASK [Find configuration template for ospf] ************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [h2]

TASK [Find configuration template for vrf] *************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy vrf configuration] ************************************************
skipping: [h2]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h3]

TASK [Find configuration template for vlan] ************************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h3]

TASK [Find configuration template for routing] *********************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy routing configuration] ********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h3]

TASK [Find configuration template for ospf] ************************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [h3]

TASK [Find configuration template for vrf] *************************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy vrf configuration] ************************************************
skipping: [h3]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h4]

TASK [Find configuration template for vlan] ************************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h4]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h4]

TASK [Find configuration template for routing] *********************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy routing configuration] ********************************************
skipping: [h4]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h4]

TASK [Find configuration template for ospf] ************************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h4]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [h4]

TASK [Find configuration template for vrf] *************************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy vrf configuration] ************************************************
skipping: [h4]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h5]

TASK [Find configuration template for vlan] ************************************
skipping: [h5]

TASK [fail] ********************************************************************
skipping: [h5]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h5]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h5]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h5]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h5]

TASK [Find configuration template for routing] *********************************
skipping: [h5]

TASK [fail] ********************************************************************
skipping: [h5]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h5]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h5]

TASK [Deploy routing configuration] ********************************************
skipping: [h5]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h5]

TASK [Find configuration template for ospf] ************************************
skipping: [h5]

TASK [fail] ********************************************************************
skipping: [h5]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h5]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h5]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h5]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [h5]

TASK [Find configuration template for vrf] *************************************
skipping: [h5]

TASK [fail] ********************************************************************
skipping: [h5]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [h5]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h5]

TASK [Deploy vrf configuration] ************************************************
skipping: [h5]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
h1                         : ok=17   changed=0    unreachable=0    failed=0    skipped=30   rescued=0    ignored=0   
h2                         : ok=17   changed=0    unreachable=0    failed=0    skipped=30   rescued=0    ignored=0   
h3                         : ok=17   changed=0    unreachable=0    failed=0    skipped=30   rescued=0    ignored=0   
h4                         : ok=17   changed=0    unreachable=0    failed=0    skipped=30   rescued=0    ignored=0   
h5                         : ok=17   changed=0    unreachable=0    failed=0    skipped=30   rescued=0    ignored=0   
r1                         : ok=37   changed=3    unreachable=0    failed=0    skipped=14   rescued=0    ignored=0   
r2                         : ok=47   changed=9    unreachable=0    failed=0    skipped=19   rescued=0    ignored=0   
r3                         : ok=37   changed=3    unreachable=0    failed=0    skipped=14   rescued=0    ignored=0   


Warning: The following warnings were generated during the 'netlab initial' processing
Warning: ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
Results of configuration script deployments
================================================================================
h1                           OK: 2   
h2                           OK: 2   
h3                           OK: 2   
h4                           OK: 2   
h5                           OK: 2   


VRF lite implementation with VLAN trunks

* h1, h2, and h5 should be able to ping each other
* h3 and h4 should be able to ping each other

Please note it might take a while for the lab to work due to
STP and OSPF setup phase