[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [x2]
ok: [x1]

TASK [Find device readiness script] ********************************************
ok: [dut]
ok: [x2]
ok: [x1]

TASK [Wait for device to become ready] *****************************************
skipping: [dut]
skipping: [x2]
skipping: [x1]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x2, x1

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]
ok: [x2]
ok: [x1]

TASK [Find configuration template for initial] *********************************
ok: [dut]
ok: [x2]
ok: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x2] => 
  msg: |-
    initial configuration for x2
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname x2
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 172.42.43.1/24
    !
    interface eth1
     no shutdown
     description x2 -> dut [external]
     ip address 172.16.1.3/24
     ipv6 address 2001:db8:4:1::3/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [x1] => 
  msg: |-
    initial configuration for x1
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname x1
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 172.42.42.1/24
     ipv6 address 2001:db8:a01::1/64
    !
    interface eth1
     no shutdown
     description x1 -> dut [external]
     ip address 172.16.0.2/24
     ipv6 address 2001:db8:4::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [dut] => 
  msg: |-
    initial configuration for dut
    =========================================
    #!/bin/bash
    #
    set -e
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Build hosts file
    #
    echo "INIT: setting hostname"
    hostname dut
    #
    #
    # Build hosts file
    #
    #
    cat <<SCRIPT >/tmp/hosts
    #
    # Created by netlab initial
    #
    10.0.0.1 dut
    172.16.0.1 swp1.dut
    2001:db8:4::1 swp1.dut
    172.16.1.1 swp2.dut
    2001:db8:4:1::1 swp2.dut
    172.42.43.1 x2
    172.16.1.3 eth1.x2
    2001:db8:4:1::3 eth1.x2
    172.42.42.1 x1
    2001:db8:a01::1 x1
    172.16.0.2 eth1.x1
    2001:db8:4::2 eth1.x1
    SCRIPT
    grep "Created by netlab" /etc/hosts || uniq /tmp/hosts >>/etc/hosts
    #
    # Disable ZTP
    #
    ztp --disable
    #
    #
    echo "INIT: creating loopback interface"
    #
    # Create loopback interface entry
    #
    cat >/etc/network/interfaces.d/10-loopback.intf <<CONFIG
    auto lo
    iface lo inet loopback
      address 10.0.0.1/32
  
    CONFIG
    #
    until ifreload -a; do
      sleep 1
    done
    #
    echo "INIT: creating other interface"
    cat >/etc/network/interfaces.d/11-physical.intf <<CONFIG
    auto swp1
  
    iface swp1 inet static
      mtu 1500
      address 172.16.0.1/24
  
    iface swp1 inet6 static
      mtu 1500
      address 2001:db8:4::1/64
    auto swp2
  
    iface swp2 inet static
      mtu 1500
      address 172.16.1.1/24
  
    iface swp2 inet6 static
      mtu 1500
      address 2001:db8:4:1::1/64
    CONFIG
    #
    echo "INIT: executing ifreload"
    until ifreload -a; do
      sleep 1
    done
    #
    # For whatever crazy reason, I had to enable IPv6 in containers
    #
    sysctl -qw net.ipv6.conf.swp1.disable_ipv6=0
    sysctl -qw net.ipv6.conf.swp2.disable_ipv6=0
    #
    # Enable FRR modules for ['bgp']
    #
    #
    # Enable FRR daemons
    #
    echo "bgpd=yes" >>/etc/frr/daemons
  
    systemctl enable frr.service
    systemctl start frr.service
    systemctl reload frr.service
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    ipv6 forwarding
    !
    interface swp1
    ! no shutdown
     description dut -> x1 [external]
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    interface swp2
    ! no shutdown
     description dut -> x2 [external]
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    #
    # Enable LLDP
    #
    echo "INIT: enabling LLDP"
    cat <<CONFIG >/etc/lldpd.d/system.conf
    configure lldp tx-interval 30
    configure lldp tx-hold 3
    configure system interface pattern *,!eth0,swp*
    CONFIG
    service lldpd restart

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]
ok: [x2]
ok: [x1]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/cumulus.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/initial-clab.yml for x2, x1

TASK [copy cumulus config to /tmp/config.sh] ***********************************
changed: [dut]

TASK [set_fact deployed_config] ************************************************
ok: [dut]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/cumulus.j2] ***
changed: [dut]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/cumulus.j2] ***
skipping: [dut]

TASK [Attempt to load VRF kernel module] ***************************************
changed: [x1 -> localhost]
changed: [x2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [x2]
skipping: [x1]

TASK [include_tasks] ***********************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/deploy-config.yml for x2, x1

TASK [template] ****************************************************************
changed: [x2]
changed: [x1]

TASK [set_fact] ****************************************************************
ok: [x2]
ok: [x1]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
changed: [x2]
changed: [x1]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
skipping: [x2]
skipping: [x1]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [x1]
ok: [x2]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=bgp)

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [dut]
ok: [x1]
ok: [x2]

TASK [Find configuration template for bgp] *************************************
ok: [dut]
ok: [x1]
ok: [x2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    bgp configuration for dut
    =========================================
    !
    router bgp 64500
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 10.0.0.1
    !
      neighbor 172.16.0.2 remote-as 65100
      neighbor 172.16.0.2 description x1
    !
      neighbor 172.16.1.3 remote-as 64507
      neighbor 172.16.1.3 description x2
    !
      neighbor 2001:db8:4::2 remote-as 65100
      neighbor 2001:db8:4::2 description x1
    !
      neighbor 2001:db8:4:1::3 remote-as 64507
      neighbor 2001:db8:4:1::3 description x2
    !
     address-family ipv4 unicast
    !
  
    !
      network 10.0.0.1/32
    !
    !
    !
      neighbor 172.16.0.2 activate
      no neighbor 172.16.0.2 send-community all
      neighbor 172.16.0.2 send-community standard
      neighbor 172.16.0.2 send-community large
    !
      neighbor 172.16.1.3 activate
      no neighbor 172.16.1.3 send-community all
      neighbor 172.16.1.3 send-community standard
      neighbor 172.16.1.3 send-community large
    !
     address-family ipv6 unicast
    !
  
    !
    !
    !
      neighbor 2001:db8:4::2 activate
      no neighbor 2001:db8:4::2 send-community all
      neighbor 2001:db8:4::2 send-community standard
      neighbor 2001:db8:4::2 send-community large
    !
      neighbor 2001:db8:4:1::3 activate
      no neighbor 2001:db8:4:1::3 send-community all
      neighbor 2001:db8:4:1::3 send-community standard
      neighbor 2001:db8:4:1::3 send-community large
    !
    !
    !
    do write
ok: [x1] => 
  msg: |-
    bgp configuration for x1
    =========================================
    !
    router bgp 65100
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 172.42.42.1
    !
      neighbor 172.16.0.1 remote-as 64500
      neighbor 172.16.0.1 description dut
    !
      neighbor 2001:db8:4::1 remote-as 64500
      neighbor 2001:db8:4::1 description dut
    !
     address-family ipv4 unicast
    !
  
    !
      network 172.42.42.0/24
    !
    !
    !
      neighbor 172.16.0.1 activate
      no neighbor 172.16.0.1 send-community all
      neighbor 172.16.0.1 send-community standard
      neighbor 172.16.0.1 send-community large
    !
     address-family ipv6 unicast
    !
  
    !
      network 2001:db8:a01::/64
    !
    !
    !
      neighbor 2001:db8:4::1 activate
      no neighbor 2001:db8:4::1 send-community all
      neighbor 2001:db8:4::1 send-community standard
      neighbor 2001:db8:4::1 send-community large
    !
    !
    !
    do write
ok: [x2] => 
  msg: |-
    bgp configuration for x2
    =========================================
    !
    router bgp 64507
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 172.42.43.1
    !
      neighbor 172.16.1.1 remote-as 64500
      neighbor 172.16.1.1 description dut
    !
      neighbor 2001:db8:4:1::1 remote-as 64500
      neighbor 2001:db8:4:1::1 description dut
    !
     address-family ipv4 unicast
    !
  
    !
      network 172.42.43.0/24
    !
    !
    !
      neighbor 172.16.1.1 activate
      no neighbor 172.16.1.1 send-community all
      neighbor 172.16.1.1 send-community standard
      neighbor 172.16.1.1 send-community large
    !
     address-family ipv6 unicast
    !
  
    !
    !
    !
      neighbor 2001:db8:4:1::1 activate
      no neighbor 2001:db8:4:1::1 send-community all
      neighbor 2001:db8:4:1::1 send-community standard
      neighbor 2001:db8:4:1::1 send-community large
    !
    !
    !
    do write

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [dut]
ok: [x1]
ok: [x2]

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/cumulus.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for x1, x2

TASK [copy cumulus config to /tmp/config.sh] ***********************************
changed: [dut]

TASK [set_fact deployed_config] ************************************************
ok: [dut]

TASK [run /tmp/config.sh to deploy bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/cumulus.j2] ***
skipping: [dut]

TASK [run vtysh to import bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/cumulus.j2] ***
changed: [dut]

TASK [template] ****************************************************************
changed: [x1]
changed: [x2]

TASK [set_fact] ****************************************************************
ok: [x1]
ok: [x2]

TASK [run /tmp/config.sh to deploy bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/frr.j2] ***
skipping: [x1]
skipping: [x2]

TASK [run vtysh to import bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/frr.j2] ***
changed: [x2]
changed: [x1]

PLAY [Deploy custom deployment templates] **************************************

TASK [Run custom configuration deployment scripts] *****************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-custom-config.yml for dut => (item=bgp.session)

TASK [Find configuration template] *********************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Check is the configuration template is a file] ***************************
ok: [dut -> localhost]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Process template /home/pipi/net101/tools/netsim/extra/bgp.session/cumulus.j2 for dut] ***
skipping: [dut]

TASK [Find custom configuration deployment script] *****************************
ok: [dut]

TASK [Run the configuration deployment script] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/cumulus.yml for dut

TASK [copy cumulus config to /tmp/config.sh] ***********************************
changed: [dut]

TASK [set_fact deployed_config] ************************************************
ok: [dut]

TASK [run /tmp/config.sh to deploy bgp.session config from /home/pipi/net101/tools/netsim/extra/bgp.session/cumulus.j2] ***
changed: [dut]

TASK [run vtysh to import bgp.session config from /home/pipi/net101/tools/netsim/extra/bgp.session/cumulus.j2] ***
skipping: [dut]

PLAY RECAP *********************************************************************
dut                        : ok=29   changed=6    unreachable=0    failed=0    skipped=7    rescued=0    ignored=0   
x1                         : ok=23   changed=5    unreachable=0    failed=0    skipped=4    rescued=0    ignored=0   
x2                         : ok=23   changed=5    unreachable=0    failed=0    skipped=4    rescued=0    ignored=0   



Use this topology to test the 'remove private AS' functionality. The DUT has
to remove AS 65100 from outgoing updates sent to X2, X2 to accept the BGP
prefix advertised by X1.