Warning in ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
... Ansible core version 2.19 introduced breaking changes in templates and playbooks
... We tested netlab core with Ansible version 12.x but not every device template
... You might want to downgrade Ansible to version 11.10 or lower.
... Use 'netlab install ansible' on Ubuntu to do that
... Finally, please open a GitHub issue if you experience errors/crashes
... Set defaults.ansible.warnings.ver12 to False to hide this warning
 [INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[CREATED] s1: initial,vlan
[CREATED] s2: initial,vlan
[CREATED] s3: initial,vlan
[CREATED] s4: initial,vlan
[CREATED] r1: initial,routing
[CREATED] r2: initial,routing
[CREATED] r3: initial,routing
[CREATED] r4: initial,routing
[CREATED] d1: initial,routing
[CREATED] d2: initial,routing
[CREATED] d3: initial,routing
[CREATED] d4: initial,routing
 [INFO] Executing initial configuration for node r1 (namespace clab-
          ml_17-r1)
 [INFO] Executing routing configuration for node r1 (namespace clab-
          ml_17-r1)
 [INFO] Executing initial configuration for node r2 (namespace clab-
          ml_17-r2)
 [INFO] Executing routing configuration for node r2 (namespace clab-
          ml_17-r2)
 [INFO] Executing initial configuration for node r3 (namespace clab-
          ml_17-r3)
 [INFO] Executing routing configuration for node r3 (namespace clab-
          ml_17-r3)
 [INFO] Executing initial configuration for node r4 (namespace clab-
          ml_17-r4)
 [INFO] Executing routing configuration for node r4 (namespace clab-
          ml_17-r4)
 [INFO] Executing initial configuration for node d1 (namespace clab-
          ml_17-d1)
 [INFO] Executing routing configuration for node d1 (namespace clab-
          ml_17-d1)
 [INFO] Executing initial configuration for node d2 (namespace clab-
          ml_17-d2)
 [INFO] Executing routing configuration for node d2 (namespace clab-
          ml_17-d2)
 [INFO] Executing initial configuration for node d3 (namespace clab-
          ml_17-d3)
 [INFO] Executing routing configuration for node d3 (namespace clab-
          ml_17-d3)
 [INFO] Executing initial configuration for node d4 (namespace clab-
          ml_17-d4)
 [INFO] Executing routing configuration for node d4 (namespace clab-
          ml_17-d4)

 [INFO] Starting Ansible playbook to deploy the rest of the
          configurations
[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned
[WARNING]: Found variable using reserved name 'hosts'.
Origin: /work/netlab_cicd/group_vars/all/topology.yml:157:1

155     ipv4: 10.2.0.0/24
156     prefix: 32
157 hosts:
    ^ column 1


PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [s2]
ok: [s3]
ok: [s4]
ok: [r1]
ok: [r2]
ok: [r3]
ok: [s1]
ok: [r4]
ok: [d1]
ok: [d2]
ok: [d3]
ok: [d4]

TASK [Generic readiness tests] *************************************************
skipping: [s1]
skipping: [s2]
skipping: [s3]
skipping: [s4]
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]
skipping: [d1]
skipping: [d2]
skipping: [d3]
skipping: [d4]

TASK [Find device readiness script] ********************************************
ok: [s2]
ok: [s3]
ok: [s4]
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]
ok: [d1]
ok: [d2]
ok: [s1]
ok: [d3]
ok: [d4]

TASK [Wait for device to become ready] *****************************************
skipping: [s1]
skipping: [s2]
skipping: [s3]
skipping: [s4]
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]
skipping: [d1]
skipping: [d2]
skipping: [d3]
skipping: [d4]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s4
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d4

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s1]

TASK [Find configuration template for normalize] *******************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s1]

TASK [Deploy normalize configuration] ******************************************
skipping: [s1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s2]

TASK [Find configuration template for normalize] *******************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s2]

TASK [Deploy normalize configuration] ******************************************
skipping: [s2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s3]

TASK [Find configuration template for normalize] *******************************
ok: [s3]

TASK [fail] ********************************************************************
skipping: [s3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s3]

TASK [Deploy normalize configuration] ******************************************
skipping: [s3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s4]

TASK [Find configuration template for normalize] *******************************
ok: [s4]

TASK [fail] ********************************************************************
skipping: [s4]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s4]

TASK [Deploy normalize configuration] ******************************************
skipping: [s4]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r1]

TASK [Find configuration template for normalize] *******************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy normalize configuration] ******************************************
skipping: [r1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r2]

TASK [Find configuration template for normalize] *******************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy normalize configuration] ******************************************
skipping: [r2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r3]

TASK [Find configuration template for normalize] *******************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy normalize configuration] ******************************************
skipping: [r3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r4]

TASK [Find configuration template for normalize] *******************************
ok: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r4]

TASK [Deploy normalize configuration] ******************************************
skipping: [r4]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [d1]

TASK [Find configuration template for normalize] *******************************
ok: [d1]

TASK [fail] ********************************************************************
skipping: [d1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [d1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [d1]

TASK [Deploy normalize configuration] ******************************************
skipping: [d1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [d2]

TASK [Find configuration template for normalize] *******************************
ok: [d2]

TASK [fail] ********************************************************************
skipping: [d2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [d2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [d2]

TASK [Deploy normalize configuration] ******************************************
skipping: [d2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [d3]

TASK [Find configuration template for normalize] *******************************
ok: [d3]

TASK [fail] ********************************************************************
skipping: [d3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [d3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [d3]

TASK [Deploy normalize configuration] ******************************************
skipping: [d3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [d4]

TASK [Find configuration template for normalize] *******************************
ok: [d4]

TASK [fail] ********************************************************************
skipping: [d4]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [d4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [d4]

TASK [Deploy normalize configuration] ******************************************
skipping: [d4]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s4
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d4

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s1]

TASK [Find configuration template for initial] *********************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "initial configuration for s1\n=========================================\nhostname s1\n!\nlldp enable\n!\n!\nip host s2 10.0.0.2\nip host s3 10.0.0.3\nip host s4 10.0.0.4\n!\n!\ndefault mtu 1532\n!\ninterface mgmt1/1/1\n no lldp transmit\n no lldp receive\n!\ninterface loopback0\n no shutdown\n ip address 10.0.0.1/32\n no ipv6 enable\n!\ninterface ethernet1/1/1\n no shutdown\n no switchport\n description \"s1 -> s2\"\n no ipv6 enable\n!\ninterface ethernet1/1/2\n no shutdown\n no switchport\n description \"s1 -> s3\"\n no ipv6 enable\n!\ninterface ethernet1/1/3\n no shutdown\n no switchport\n description \"s1 -> s4\"\n no ipv6 enable\n!\ninterface ethernet1/1/4\n no shutdown\n no switchport\n description \"[Access VLAN red] s1 -> r1\"\n no ipv6 enable\n!\ninterface ethernet1/1/5\n no shutdown\n no switchport\n description \"[Access VLAN vlan_1] s1 -> d1\"\n no ipv6 enable\n!\ninterface vlan1\n no shutdown\n description \"VLAN vlan_1 (1) -> [d1\\\\,d2\\\\,s2\\\\,d3\\\\,s3...]\"\n ip address 172.31.1.1/24\n no ipv6 enable\n!\ninterface vlan700\n no shutdown\n description \"VLAN red (700) -> [r1\\\\,r2\\\\,s2\\\\,r3\\\\,s3...]\"\n no ipv6 enable\n!\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1

TASK [wait_for_connection] *****************************************************
skipping: [s1]

TASK [dellos10_config: deploying initial from /work/netlab_cicd/node_files/s1/initial, save to startup=yes] ***
changed: [s1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s2]

TASK [Find configuration template for initial] *********************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "initial configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\ncat <<SCRIPT >.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)$ \"\nexport PATH=$PATH:/usr/sbin\necho \necho \"Use sudo vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# Build hosts file\n#\n#\ncat <<SCRIPT >/tmp/hosts\n#\n# Created by netlab initial\n#\n172.31.1.9 d1 eth1.d1\n172.31.1.10 d2 eth1.d2\n172.31.1.11 d3 eth1.d3\n172.31.1.12 d4 eth1.d4\n172.31.1.5 r1 eth1.r1\n172.31.1.6 r2 eth1.r2\n172.31.1.7 r3 eth1.r3\n172.31.1.8 r4 eth1.r4\n10.0.0.1 s1\n172.31.1.1 vlan1.s1\n10.0.0.2 s2\n172.31.1.2 vlan1.s2\n10.0.0.3 s3\n172.31.1.3 vlan1.s3\n10.0.0.4 s4\n172.31.1.4 vlan1.s4\nSCRIPT\ngrep \"Created by netlab\" /etc/hosts || uniq /tmp/hosts >>/etc/hosts\n#\n# Configure system defaults on Ubuntu\n#\nhostnamectl set-hostname s2\nAPT_INSTALL=\n#\nif which gpg; then\n  echo \"Package gnupg already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL gnupg\"\nfi\n#\nif which curl; then\n  echo \"Package curl already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL curl\"\nfi\n#\nif which bridge; then\n  echo \"Package iproute2 already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL iproute2\"\nfi\n#\n# APT_INSTALL always starts with a blank, so we can't just check if it's empty\n# The following hack turns a string that contains only whitespaces into\n# an empty string and removes leading whitespaces\n#\nAPT_INSTALL=`echo $APT_INSTALL`\nif [ -n \"$APT_INSTALL\" ]; then\n  echo \"Installing packages $APT_INSTALL\"\n  apt-get update -qq && apt-get install -qq $APT_INSTALL\nfi\n#\n# Install FRR on a Ubuntu VM if needed\n#\nif which /usr/lib/frr/frrinit.sh; then\n  echo \"FRR already installed, skipping installation\"\nelse\n  curl -s https://deb.frrouting.org/frr/keys.asc >/etc/apt/trusted.gpg.d/frr.asc\n  FRRVER=\"frr-stable\"\n  echo deb https://deb.frrouting.org/frr $(lsb_release -s -c) $FRRVER > /etc/apt/sources.list.d/frr.list\n  apt-get update -qq && apt-get install -qq frr frr-pythontools bridge-utils ethtool\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n#\n# Enable FRR daemons\n#\n\n/usr/lib/frr/frrinit.sh restart\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\nip link set eth3 down\nsysctl -qw net.ipv6.conf.eth3.disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s2\n!\nlog file /tmp/logging\n\n!\nip forwarding\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.2/32\n!\ninterface eth1\n no shutdown\n description s2 -> s1\n ! no ip address\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s2 -> r2\n ! no ip address\n!\ninterface eth3\n no shutdown\n description [Access VLAN vlan_1] s2 -> d2\n ! no ip address\n!\ninterface eth1.700\n no shutdown\n description [SubIf VLAN red] s2 -> s1\n ! no ip address\n!\ninterface eth1.1\n no shutdown\n description [SubIf VLAN vlan_1] s2 -> s1\n ! no ip address\n!\ninterface vlan700\n no shutdown\n description VLAN red (700) -> [r1,s1,r2,r3,s3...]\n ! no ip address\n!\ninterface vlan1\n no shutdown\n description VLAN vlan_1 (1) -> [d1,s1,d2,d3,s3...]\n ip address 172.31.1.2/24\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/s2/initial] ***
changed: [s2]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/s2/initial] ***
skipping: [s2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s3]

TASK [Find configuration template for initial] *********************************
ok: [s3]

TASK [fail] ********************************************************************
skipping: [s3]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s3] => {
    "msg": "initial configuration for s3\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\ncat <<SCRIPT >.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)$ \"\nexport PATH=$PATH:/usr/sbin\necho \necho \"Use sudo vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# Build hosts file\n#\n#\ncat <<SCRIPT >/tmp/hosts\n#\n# Created by netlab initial\n#\n172.31.1.9 d1 eth1.d1\n172.31.1.10 d2 eth1.d2\n172.31.1.11 d3 eth1.d3\n172.31.1.12 d4 eth1.d4\n172.31.1.5 r1 eth1.r1\n172.31.1.6 r2 eth1.r2\n172.31.1.7 r3 eth1.r3\n172.31.1.8 r4 eth1.r4\n10.0.0.1 s1\n172.31.1.1 vlan1.s1\n10.0.0.2 s2\n172.31.1.2 vlan1.s2\n10.0.0.3 s3\n172.31.1.3 vlan1.s3\n10.0.0.4 s4\n172.31.1.4 vlan1.s4\nSCRIPT\ngrep \"Created by netlab\" /etc/hosts || uniq /tmp/hosts >>/etc/hosts\n#\n# Configure system defaults on Ubuntu\n#\nhostnamectl set-hostname s3\nAPT_INSTALL=\n#\nif which gpg; then\n  echo \"Package gnupg already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL gnupg\"\nfi\n#\nif which curl; then\n  echo \"Package curl already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL curl\"\nfi\n#\nif which bridge; then\n  echo \"Package iproute2 already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL iproute2\"\nfi\n#\n# APT_INSTALL always starts with a blank, so we can't just check if it's empty\n# The following hack turns a string that contains only whitespaces into\n# an empty string and removes leading whitespaces\n#\nAPT_INSTALL=`echo $APT_INSTALL`\nif [ -n \"$APT_INSTALL\" ]; then\n  echo \"Installing packages $APT_INSTALL\"\n  apt-get update -qq && apt-get install -qq $APT_INSTALL\nfi\n#\n# Install FRR on a Ubuntu VM if needed\n#\nif which /usr/lib/frr/frrinit.sh; then\n  echo \"FRR already installed, skipping installation\"\nelse\n  curl -s https://deb.frrouting.org/frr/keys.asc >/etc/apt/trusted.gpg.d/frr.asc\n  FRRVER=\"frr-stable\"\n  echo deb https://deb.frrouting.org/frr $(lsb_release -s -c) $FRRVER > /etc/apt/sources.list.d/frr.list\n  apt-get update -qq && apt-get install -qq frr frr-pythontools bridge-utils ethtool\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n#\n# Enable FRR daemons\n#\n\n/usr/lib/frr/frrinit.sh restart\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\nip link set eth3 down\nsysctl -qw net.ipv6.conf.eth3.disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s3\n!\nlog file /tmp/logging\n\n!\nip forwarding\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.3/32\n!\ninterface eth1\n no shutdown\n description s3 -> s1\n ! no ip address\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s3 -> r3\n ! no ip address\n!\ninterface eth3\n no shutdown\n description [Access VLAN vlan_1] s3 -> d3\n ! no ip address\n!\ninterface eth1.700\n no shutdown\n description [SubIf VLAN red] s3 -> s1\n ! no ip address\n!\ninterface vlan1\n no shutdown\n description VLAN vlan_1 (1) -> [d1,s1,d2,s2,d3...]\n ip address 172.31.1.3/24\n!\ninterface vlan700\n no shutdown\n description VLAN red (700) -> [r1,s1,r2,s2,r3...]\n ! no ip address\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s3

TASK [template] ****************************************************************
changed: [s3]

TASK [set_fact] ****************************************************************
ok: [s3]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/s3/initial] ***
changed: [s3]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/s3/initial] ***
skipping: [s3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s4]

TASK [Find configuration template for initial] *********************************
ok: [s4]

TASK [fail] ********************************************************************
skipping: [s4]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s4] => {
    "msg": "initial configuration for s4\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\ncat <<SCRIPT >.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)$ \"\nexport PATH=$PATH:/usr/sbin\necho \necho \"Use sudo vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# Build hosts file\n#\n#\ncat <<SCRIPT >/tmp/hosts\n#\n# Created by netlab initial\n#\n172.31.1.9 d1 eth1.d1\n172.31.1.10 d2 eth1.d2\n172.31.1.11 d3 eth1.d3\n172.31.1.12 d4 eth1.d4\n172.31.1.5 r1 eth1.r1\n172.31.1.6 r2 eth1.r2\n172.31.1.7 r3 eth1.r3\n172.31.1.8 r4 eth1.r4\n10.0.0.1 s1\n172.31.1.1 vlan1.s1\n10.0.0.2 s2\n172.31.1.2 vlan1.s2\n10.0.0.3 s3\n172.31.1.3 vlan1.s3\n10.0.0.4 s4\n172.31.1.4 vlan1.s4\nSCRIPT\ngrep \"Created by netlab\" /etc/hosts || uniq /tmp/hosts >>/etc/hosts\n#\n# Configure system defaults on Ubuntu\n#\nhostnamectl set-hostname s4\nAPT_INSTALL=\n#\nif which gpg; then\n  echo \"Package gnupg already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL gnupg\"\nfi\n#\nif which curl; then\n  echo \"Package curl already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL curl\"\nfi\n#\nif which bridge; then\n  echo \"Package iproute2 already installed\"\nelse\n  APT_INSTALL=\"$APT_INSTALL iproute2\"\nfi\n#\n# APT_INSTALL always starts with a blank, so we can't just check if it's empty\n# The following hack turns a string that contains only whitespaces into\n# an empty string and removes leading whitespaces\n#\nAPT_INSTALL=`echo $APT_INSTALL`\nif [ -n \"$APT_INSTALL\" ]; then\n  echo \"Installing packages $APT_INSTALL\"\n  apt-get update -qq && apt-get install -qq $APT_INSTALL\nfi\n#\n# Install FRR on a Ubuntu VM if needed\n#\nif which /usr/lib/frr/frrinit.sh; then\n  echo \"FRR already installed, skipping installation\"\nelse\n  curl -s https://deb.frrouting.org/frr/keys.asc >/etc/apt/trusted.gpg.d/frr.asc\n  FRRVER=\"frr-stable\"\n  echo deb https://deb.frrouting.org/frr $(lsb_release -s -c) $FRRVER > /etc/apt/sources.list.d/frr.list\n  apt-get update -qq && apt-get install -qq frr frr-pythontools bridge-utils ethtool\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n#\n# Enable FRR daemons\n#\n\n/usr/lib/frr/frrinit.sh restart\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\nip link set eth3 down\nsysctl -qw net.ipv6.conf.eth3.disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s4\n!\nlog file /tmp/logging\n\n!\nip forwarding\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.4/32\n!\ninterface eth1\n no shutdown\n description s4 -> s1\n ! no ip address\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s4 -> r4\n ! no ip address\n!\ninterface eth3\n no shutdown\n description [Access VLAN vlan_1] s4 -> d4\n ! no ip address\n!\ninterface eth1.1\n no shutdown\n description [SubIf VLAN vlan_1] s4 -> s1\n ! no ip address\n!\ninterface vlan700\n no shutdown\n description VLAN red (700) -> [r1,s1,r2,s2,r3...]\n ! no ip address\n!\ninterface vlan1\n no shutdown\n description VLAN vlan_1 (1) -> [d1,s1,d2,s2,d3...]\n ip address 172.31.1.4/24\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s4

TASK [template] ****************************************************************
changed: [s4]

TASK [set_fact] ****************************************************************
ok: [s4]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/s4/initial] ***
changed: [s4]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/s4/initial] ***
skipping: [s4]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r1]

TASK [Find configuration template for initial] *********************************
skipping: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy initial configuration] ********************************************
skipping: [r1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r2]

TASK [Find configuration template for initial] *********************************
skipping: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy initial configuration] ********************************************
skipping: [r2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r3]

TASK [Find configuration template for initial] *********************************
skipping: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy initial configuration] ********************************************
skipping: [r3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r4]

TASK [Find configuration template for initial] *********************************
skipping: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r4]

TASK [Deploy initial configuration] ********************************************
skipping: [r4]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [d1]

TASK [Find configuration template for initial] *********************************
skipping: [d1]

TASK [fail] ********************************************************************
skipping: [d1]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [d1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [d1]

TASK [Deploy initial configuration] ********************************************
skipping: [d1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [d2]

TASK [Find configuration template for initial] *********************************
skipping: [d2]

TASK [fail] ********************************************************************
skipping: [d2]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [d2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [d2]

TASK [Deploy initial configuration] ********************************************
skipping: [d2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [d3]

TASK [Find configuration template for initial] *********************************
skipping: [d3]

TASK [fail] ********************************************************************
skipping: [d3]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [d3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [d3]

TASK [Deploy initial configuration] ********************************************
skipping: [d3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [d4]

TASK [Find configuration template for initial] *********************************
skipping: [d4]

TASK [fail] ********************************************************************
skipping: [d4]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [d4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [d4]

TASK [Deploy initial configuration] ********************************************
skipping: [d4]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [s2]
ok: [s3]
ok: [s4]
ok: [r1]
ok: [r2]
ok: [s1]
ok: [r3]
ok: [r4]
ok: [d1]
ok: [d2]
ok: [d3]
ok: [d4]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s3 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s3 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s4 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s4 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d3 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d3 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d4 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for d4 => (item=routing)

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [s1]

TASK [Find configuration template for vlan] ************************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "vlan configuration for s1\n=========================================\ninterface vlan 1\n description \"VLAN vlan_1\"\n exit\n!\ninterface vlan 700\n description \"VLAN red\"\n exit\n!\n\n!\ninterface ethernet1/1/1\n switchport mode trunk\n switchport access vlan 1\n switchport trunk allowed vlan 700\n!\ninterface ethernet1/1/2\n switchport mode trunk\n switchport access vlan 1\n switchport trunk allowed vlan 700\n!\ninterface ethernet1/1/3\n switchport mode trunk\n switchport access vlan 700\n switchport trunk allowed vlan 1\n!\ninterface ethernet1/1/4\n switchport mode access\n switchport access vlan 700\n!\ninterface ethernet1/1/5\n switchport mode access\n switchport access vlan 1\n!\ninterface vlan1\n!\ninterface vlan700\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1

TASK [wait_for_connection] *****************************************************
skipping: [s1]

TASK [dellos10_config: deploying vlan from /work/netlab_cicd/node_files/s1/vlan, save to startup=yes] ***
[ERROR]: Task failed: Action failed: b'switchport trunk allowed vlan 1\r\n% Error: Default vlan cannot be configured as tagged vlan\r\ns1(conf-if-eth1/1/3)# '
Origin: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml:6:3

4     node_provider == 'clab' and ansible_connection == 'network_cli'
5
6 - name: "dellos10_config: deploying {{ netsim_action }} from {{ config_template }}, save to startup={{ _save }}"
    ^ column 3

fatal: [s1]: FAILED! => {"changed": false, "command": "switchport trunk allowed vlan 1", "msg": "b'switchport trunk allowed vlan 1\\r\\n% Error: Default vlan cannot be configured as tagged vlan\\r\\ns1(conf-if-eth1/1/3)# '", "rc": -32603}

PLAY RECAP *********************************************************************
d1                         : ok=11   changed=0    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
d2                         : ok=11   changed=0    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
d3                         : ok=11   changed=0    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
d4                         : ok=11   changed=0    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
r1                         : ok=11   changed=0    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
r2                         : ok=11   changed=0    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
r3                         : ok=11   changed=0    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
r4                         : ok=11   changed=0    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
s1                         : ok=21   changed=1    unreachable=0    failed=1    skipped=9    rescued=0    ignored=0   
s2                         : ok=18   changed=2    unreachable=0    failed=0    skipped=7    rescued=0    ignored=0   
s3                         : ok=18   changed=2    unreachable=0    failed=0    skipped=7    rescued=0    ignored=0   
s4                         : ok=18   changed=2    unreachable=0    failed=0    skipped=7    rescued=0    ignored=0   

FatalError in initial: Configuration deployment failed
Results of configuration script deployments
================================================================================
r1                           OK: 2   
r2                           OK: 2   
r3                           OK: 2   
r4                           OK: 2   
d1                           OK: 2   
d2                           OK: 2   
d3                           OK: 2   
d4                           OK: 2