Warning in ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
... Ansible core version 2.19 introduced breaking changes in templates and playbooks
... We tested netlab core with Ansible version 12.x but not every device template
... You might want to downgrade Ansible to version 11.10 or lower.
... Use 'netlab install ansible' on Ubuntu to do that
... Finally, please open a GitHub issue if you experience errors/crashes
... Set defaults.ansible.warnings.ver12 to False to hide this warning
 [INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned
[WARNING]: Found variable using reserved name 'hosts'.
Origin: /work/netlab_cicd/group_vars/all/topology.yml:168:1

166     ipv6: 2001:db8:cafe:2000::/56
167     prefix6: 128
168 hosts:
    ^ column 1


PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]
ok: [dut]

TASK [Generic readiness tests] *************************************************
skipping: [dut]
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]

TASK [Find device readiness script] ********************************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]
ok: [dut]

TASK [Wait for device to become ready] *****************************************
skipping: [dut]
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [dut]

TASK [Find configuration template for normalize] *******************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [dut]

TASK [Deploy normalize configuration] ******************************************
skipping: [dut]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r1]

TASK [Find configuration template for normalize] *******************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy normalize configuration] ******************************************
skipping: [r1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r2]

TASK [Find configuration template for normalize] *******************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy normalize configuration] ******************************************
skipping: [r2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r3]

TASK [Find configuration template for normalize] *******************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy normalize configuration] ******************************************
skipping: [r3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r4]

TASK [Find configuration template for normalize] *******************************
ok: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r4]

TASK [Deploy normalize configuration] ******************************************
skipping: [r4]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]

TASK [Find configuration template for initial] *********************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "initial configuration for dut\n=========================================\nhostname dut\n!\nlldp enable\n!\nip vrf red\nexit\nip vrf blue\nexit\n!\nip host r1 10.0.0.2\nip host r2 10.0.0.3\n!\n!\ndefault mtu 1532\n!\ninterface mgmt1/1/1\n no lldp transmit\n no lldp receive\n!\ninterface loopback0\n no shutdown\n ip address 10.0.0.1/32\n ipv6 address 2001:db8:1:1::1/64\n!\ninterface ethernet1/1/1\n no shutdown\n no switchport\n ip vrf forwarding red\n description \"dut -> r1 [external]\"\n ip address 10.1.0.1/30\n ip unreachables\n ipv6 nd max-ra-interval 4\n ipv6 nd min-ra-interval 3\n ipv6 nd send-ra\n ipv6 address 2001:db8:3::1/64\n ipv6 unreachables\n!\ninterface ethernet1/1/2\n no shutdown\n no switchport\n ip vrf forwarding red\n description \"dut -> r2 [external]\"\n ip address 10.1.0.5/30\n ip unreachables\n ipv6 nd max-ra-interval 4\n ipv6 nd min-ra-interval 3\n ipv6 nd send-ra\n ipv6 address 2001:db8:3:1::1/64\n ipv6 unreachables\n!\ninterface ethernet1/1/3\n no shutdown\n no switchport\n ip vrf forwarding blue\n description \"dut -> r3 [external]\"\n ipv6 nd max-ra-interval 4\n ipv6 nd min-ra-interval 3\n ipv6 nd send-ra\n ipv6 address 2001:db8:13::1/64\n ipv6 unreachables\n!\ninterface ethernet1/1/4\n no shutdown\n no switchport\n ip vrf forwarding blue\n description \"dut -> r4 [external]\"\n ipv6 nd max-ra-interval 4\n ipv6 nd min-ra-interval 3\n ipv6 nd send-ra\n ipv6 address 2001:db8:13:1::1/64\n ipv6 unreachables\n!\ninterface loopback1\n no shutdown\n ip vrf forwarding red\n description \"VRF Loopback red\"\n ipv6 address 2001:db8:c001:cafe::1/64\n!\ninterface loopback2\n no shutdown\n ip vrf forwarding blue\n description \"VRF Loopback blue\"\n ipv6 address 2001:db8:c001:cafe::1/64\n!\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for dut

TASK [wait_for_connection] *****************************************************
skipping: [dut]

TASK [dellos10_config: deploying initial from /work/netlab_cicd/node_files/dut/initial, save to startup=yes] ***
changed: [dut]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r1]

TASK [Find configuration template for initial] *********************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "initial configuration for r1\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r1\n!\nlog file /tmp/logging\n\n!\nip forwarding\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.2/32\n ipv6 address 2001:db8:1:2::1/64\n!\ninterface eth1\n no shutdown\n description r1 -> dut [external]\n ip address 10.1.0.2/30\n ipv6 address 2001:db8:3::2/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r1

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r1]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r1

TASK [template] ****************************************************************
changed: [r1]

TASK [set_fact] ****************************************************************
ok: [r1]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/r1/initial] ***
changed: [r1]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/r1/initial] ***
skipping: [r1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r2]

TASK [Find configuration template for initial] *********************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "initial configuration for r2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r2\n!\nlog file /tmp/logging\n\n!\nip forwarding\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.3/32\n ipv6 address 2001:db8:1:3::1/64\n!\ninterface eth1\n no shutdown\n description r2 -> dut [external]\n ip address 10.1.0.6/30\n ipv6 address 2001:db8:3:1::3/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r2

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/r2/initial] ***
changed: [r2]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/r2/initial] ***
skipping: [r2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r3]

TASK [Find configuration template for initial] *********************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r3] => {
    "msg": "initial configuration for r3\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r3\n!\nlog file /tmp/logging\n\n!\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ! no ip address\n ipv6 address 2001:db8:cafe:2000::4/128\n!\ninterface eth1\n no shutdown\n description r3 -> dut [external]\n ! no ip address\n ipv6 address 2001:db8:13::4/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r3

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r3 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r3]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r3

TASK [template] ****************************************************************
changed: [r3]

TASK [set_fact] ****************************************************************
ok: [r3]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/r3/initial] ***
changed: [r3]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/r3/initial] ***
skipping: [r3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r4]

TASK [Find configuration template for initial] *********************************
ok: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r4] => {
    "msg": "initial configuration for r4\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r4\n!\nlog file /tmp/logging\n\n!\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ! no ip address\n ipv6 address 2001:db8:cafe:2000::5/128\n!\ninterface eth1\n no shutdown\n description r4 -> dut [external]\n ! no ip address\n ipv6 address 2001:db8:13:1::5/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r4

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r4 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r4]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r4

TASK [template] ****************************************************************
changed: [r4]

TASK [set_fact] ****************************************************************
ok: [r4]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/r4/initial] ***
changed: [r4]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/r4/initial] ***
skipping: [r4]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]
ok: [dut]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4 => (item=vrf)

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [dut]

TASK [Find configuration template for bgp] *************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "bgp configuration for dut\n=========================================\n!\nrouter bgp 65000\n  log-neighbor-changes\n\n! define a generic unnumbered template to be used for eBGP unnumbered...\n! additionally, need to define link-local-only-nexthop as per Dell suggested \"Cumulus workaround\"\n! WTF Dell...\n  template unnumbered_ebgp\n    link-local-only-nexthop\n    exit\n\n  router-id 10.0.0.1\n!\n!\n address-family ipv4 unicast\n!\n\n  network 10.0.0.1/32\n!\n!\n!\n!\n address-family ipv6 unicast\n!\n\n  network 2001:db8:1:1::/64\n!\n!\n!\n!\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for dut

TASK [wait_for_connection] *****************************************************
skipping: [dut]

TASK [dellos10_config: deploying bgp from /work/netlab_cicd/node_files/dut/bgp, save to startup=yes] ***
changed: [dut]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [dut]

TASK [Find configuration template for vrf] *************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for vrf] *********************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "vrf configuration for dut\n=========================================\n\n!\nip vrf red\n!\n! ip route-import | route-export xxx\n ip route-import 65000:1\n ip route-export 65000:1\n! ipv6 route-import | route-export xxx\n ipv6 route-import 65000:1\n ipv6 route-export 65000:1\n!\nexit\n\n!\nip vrf blue\n!\n! ipv6 route-import | route-export xxx\n ipv6 route-import 65000:2\n ipv6 route-export 65000:2\n!\nexit\n!\n\nrouter bgp 65000\n!\n vrf red\n  router-id 10.0.0.1\n! need to define unnumbered template also at vrf-level\n  template unnumbered_ebgp\n    link-local-only-nexthop\n    exit\n\n!\n  neighbor 10.1.0.2\n    remote-as 65101\n    \n    description \"r1\"\n    send-community standard\n\n!\n    address-family ipv4 unicast\n      soft-reconfiguration inbound\n      activate\n    exit\n    address-family ipv6 unicast\n      no activate\n    exit\n\n    timers 3 9\n    advertisement-interval 1\n    no shutdown\n  exit\n!\n  neighbor 2001:db8:3::2\n    remote-as 65101\n    \n    description \"r1\"\n    send-community standard\n\n    address-family ipv4 unicast\n      no activate\n    exit\n!\n    address-family ipv6 unicast\n      soft-reconfiguration inbound\n      activate\n    exit\n\n    timers 3 9\n    advertisement-interval 1\n    no shutdown\n  exit\n!\n  neighbor 10.1.0.6\n    remote-as 65102\n    \n    description \"r2\"\n    send-community standard\n\n!\n    address-family ipv4 unicast\n      soft-reconfiguration inbound\n      activate\n    exit\n    address-family ipv6 unicast\n      no activate\n    exit\n\n    timers 3 9\n    advertisement-interval 1\n    no shutdown\n  exit\n!\n  neighbor 2001:db8:3:1::3\n    remote-as 65102\n    \n    description \"r2\"\n    send-community standard\n\n    address-family ipv4 unicast\n      no activate\n    exit\n!\n    address-family ipv6 unicast\n      soft-reconfiguration inbound\n      activate\n    exit\n\n    timers 3 9\n    advertisement-interval 1\n    no shutdown\n  exit\n\n!\n address-family ipv4 unicast\n redistribute connected\n\n!\n address-family ipv6 unicast\n redistribute connected\n\n   network 2001:db8:c001:cafe::/64\n\n!\n  neighbor 10.1.0.2\n     address-family ipv4 unicast\n       soft-reconfiguration inbound\n       activate\n     address-family ipv6 unicast\n       no activate\n!\n  neighbor 2001:db8:3::2\n     address-family ipv6 unicast\n       soft-reconfiguration inbound\n       activate\n     address-family ipv4 unicast\n       no activate\n!\n  neighbor 10.1.0.6\n     address-family ipv4 unicast\n       soft-reconfiguration inbound\n       activate\n     address-family ipv6 unicast\n       no activate\n!\n  neighbor 2001:db8:3:1::3\n     address-family ipv6 unicast\n       soft-reconfiguration inbound\n       activate\n     address-family ipv4 unicast\n       no activate\n\n!\n vrf blue\n  router-id 10.0.0.1\n! need to define unnumbered template also at vrf-level\n  template unnumbered_ebgp\n    link-local-only-nexthop\n    exit\n\n!\n  neighbor 2001:db8:13::4\n    remote-as 65103\n    \n    description \"r3\"\n    send-community standard\n\n    address-family ipv4 unicast\n      no activate\n    exit\n!\n    address-family ipv6 unicast\n      soft-reconfiguration inbound\n      activate\n    exit\n\n    timers 3 9\n    advertisement-interval 1\n    no shutdown\n  exit\n!\n  neighbor 2001:db8:13:1::5\n    remote-as 65104\n    \n    description \"r4\"\n    send-community standard\n\n    address-family ipv4 unicast\n      no activate\n    exit\n!\n    address-family ipv6 unicast\n      soft-reconfiguration inbound\n      activate\n    exit\n\n    timers 3 9\n    advertisement-interval 1\n    no shutdown\n  exit\n\n!\n address-family ipv6 unicast\n redistribute connected\n\n   network 2001:db8:c001:cafe::/64\n\n!\n  neighbor 2001:db8:13::4\n     address-family ipv6 unicast\n       soft-reconfiguration inbound\n       activate\n     address-family ipv4 unicast\n       no activate\n!\n  neighbor 2001:db8:13:1::5\n     address-family ipv6 unicast\n       soft-reconfiguration inbound\n       activate\n     address-family ipv4 unicast\n       no activate\n\n"
}

TASK [Deploy vrf configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for dut

TASK [wait_for_connection] *****************************************************
skipping: [dut]

TASK [dellos10_config: deploying vrf from /work/netlab_cicd/node_files/dut/vrf, save to startup=yes] ***
changed: [dut]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r1]

TASK [Find configuration template for bgp] *************************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "bgp configuration for r1\n=========================================\n!\nrouter bgp 65101\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.2\n!\n  neighbor 10.1.0.1 remote-as 65000\n  neighbor 10.1.0.1 description dut\n!\n  neighbor 2001:db8:3::1 remote-as 65000\n  neighbor 2001:db8:3::1 description dut\n!\n address-family ipv4 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 10.0.0.2/32\n!\n  neighbor 10.1.0.1 activate\n  no neighbor 10.1.0.1 send-community all\n  neighbor 10.1.0.1 send-community standard\n  neighbor 10.1.0.1 send-community large\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:1:2::/64\n!\n  neighbor 2001:db8:3::1 activate\n  no neighbor 2001:db8:3::1 send-community all\n  neighbor 2001:db8:3::1 send-community standard\n  neighbor 2001:db8:3::1 send-community large\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r1

TASK [template] ****************************************************************
changed: [r1]

TASK [set_fact] ****************************************************************
ok: [r1]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/node_files/r1/bgp] ***
skipping: [r1]

TASK [run vtysh to import bgp config from /work/netlab_cicd/node_files/r1/bgp] ***
changed: [r1]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r1]

TASK [Find configuration template for vrf] *************************************
skipping: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy vrf configuration] ************************************************
skipping: [r1]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r2]

TASK [Find configuration template for bgp] *************************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "bgp configuration for r2\n=========================================\n!\nrouter bgp 65102\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.3\n!\n  neighbor 10.1.0.5 remote-as 65000\n  neighbor 10.1.0.5 description dut\n!\n  neighbor 2001:db8:3:1::1 remote-as 65000\n  neighbor 2001:db8:3:1::1 description dut\n!\n address-family ipv4 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 10.0.0.3/32\n!\n  neighbor 10.1.0.5 activate\n  no neighbor 10.1.0.5 send-community all\n  neighbor 10.1.0.5 send-community standard\n  neighbor 10.1.0.5 send-community large\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:1:3::/64\n!\n  neighbor 2001:db8:3:1::1 activate\n  no neighbor 2001:db8:3:1::1 send-community all\n  neighbor 2001:db8:3:1::1 send-community standard\n  neighbor 2001:db8:3:1::1 send-community large\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/node_files/r2/bgp] ***
skipping: [r2]

TASK [run vtysh to import bgp config from /work/netlab_cicd/node_files/r2/bgp] ***
changed: [r2]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r2]

TASK [Find configuration template for vrf] *************************************
skipping: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy vrf configuration] ************************************************
skipping: [r2]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r3]

TASK [Find configuration template for bgp] *************************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r3] => {
    "msg": "bgp configuration for r3\n=========================================\n!\nrouter bgp 65103\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.4\n!\n  neighbor 2001:db8:13::1 remote-as 65000\n  neighbor 2001:db8:13::1 description dut\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:cafe:2000::4/128\n!\n  neighbor 2001:db8:13::1 activate\n  no neighbor 2001:db8:13::1 send-community all\n  neighbor 2001:db8:13::1 send-community standard\n  neighbor 2001:db8:13::1 send-community large\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r3

TASK [template] ****************************************************************
changed: [r3]

TASK [set_fact] ****************************************************************
ok: [r3]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/node_files/r3/bgp] ***
skipping: [r3]

TASK [run vtysh to import bgp config from /work/netlab_cicd/node_files/r3/bgp] ***
changed: [r3]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r3]

TASK [Find configuration template for vrf] *************************************
skipping: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy vrf configuration] ************************************************
skipping: [r3]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r4]

TASK [Find configuration template for bgp] *************************************
ok: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r4] => {
    "msg": "bgp configuration for r4\n=========================================\n!\nrouter bgp 65104\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.5\n!\n  neighbor 2001:db8:13:1::1 remote-as 65000\n  neighbor 2001:db8:13:1::1 description dut\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:cafe:2000::5/128\n!\n  neighbor 2001:db8:13:1::1 activate\n  no neighbor 2001:db8:13:1::1 send-community all\n  neighbor 2001:db8:13:1::1 send-community standard\n  neighbor 2001:db8:13:1::1 send-community large\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r4

TASK [template] ****************************************************************
changed: [r4]

TASK [set_fact] ****************************************************************
ok: [r4]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/node_files/r4/bgp] ***
skipping: [r4]

TASK [run vtysh to import bgp config from /work/netlab_cicd/node_files/r4/bgp] ***
changed: [r4]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r4]

TASK [Find configuration template for vrf] *************************************
skipping: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r4]

TASK [Deploy vrf configuration] ************************************************
skipping: [r4]

PLAY [Deploy custom deployment templates] **************************************

TASK [Run custom configuration deployment scripts] *****************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-custom-config.yml for r1, r2, r3, r4 => (item=bgp-xact)

TASK [Find configuration template] *********************************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]

TASK [fail] ********************************************************************
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]

TASK [Check is the configuration template is a file] ***************************
ok: [r1 -> localhost]
ok: [r2 -> localhost]
ok: [r3 -> localhost]
ok: [r4 -> localhost]

TASK [fail] ********************************************************************
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]

TASK [Process template /work/netlab_cicd/node_files/r1/bgp-xact for r1] ********
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]

TASK [Find custom configuration deployment script] *****************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]

TASK [Run the configuration deployment script] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r1, r2, r3, r4

TASK [template] ****************************************************************
changed: [r2]
changed: [r1]
changed: [r4]
changed: [r3]

TASK [set_fact] ****************************************************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]

TASK [run /tmp/config.sh to deploy bgp-xact config from /work/netlab_cicd/node_files/r1/bgp-xact] ***
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]

TASK [run vtysh to import bgp-xact config from /work/netlab_cicd/node_files/r1/bgp-xact] ***
changed: [r4]
changed: [r1]
changed: [r3]
changed: [r2]

PLAY RECAP *********************************************************************
dut                        : ok=28   changed=3    unreachable=0    failed=0    skipped=11   rescued=0    ignored=0   
r1                         : ok=37   changed=7    unreachable=0    failed=0    skipped=19   rescued=0    ignored=0   
r2                         : ok=37   changed=7    unreachable=0    failed=0    skipped=19   rescued=0    ignored=0   
r3                         : ok=37   changed=7    unreachable=0    failed=0    skipped=19   rescued=0    ignored=0   
r4                         : ok=37   changed=7    unreachable=0    failed=0    skipped=19   rescued=0    ignored=0   


Warning: The following warnings were generated during the 'netlab initial' processing
Warning: ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
[CREATED] dut: initial,bgp,vrf
[CREATED] r1: initial,bgp,bgp-xact
[CREATED] r2: initial,bgp,bgp-xact
[CREATED] r3: initial,bgp,bgp-xact
[CREATED] r4: initial,bgp,bgp-xact


The device under test has two VRFs with two interfaces in each VRF.
Routers are attached to those interfaces and run BGP with device under test
in a dual-stack (IPv4 + IPv6) environment.

The routing and connectivity tests focus on IPv6 (another test cases focuses
on IPv4), the dual-stack addressing is used only to trigger the incorrect
activation of BGP address families.

* r1 and r2 should be able to ping each other and rtr VRF loopback
* r3 and r4 should be able to ping each other and rtr VRF loopback
* r1 should not be able to reach r3

The test also checks whether DUT unnecessarily enables IPv4 AF over IPv6
EBGP sessions