[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h3]
ok: [h2]
ok: [h4]

TASK [Find device readiness script] ********************************************
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h2]
ok: [h4]
ok: [h3]

TASK [Wait for device to become ready] *****************************************
skipping: [dut]
skipping: [xs]
skipping: [h1]
skipping: [h2]
skipping: [h3]
skipping: [h4]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xs, h1, h2, h3, h4

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]

TASK [Find configuration template for initial] *********************************
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h3]
ok: [h2]
ok: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    initial configuration for dut
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth2.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth3.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth4.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    ip link set eth2 mtu 1500
    ip link set eth3 mtu 1500
    ip link set eth4 mtu 1500
  
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname dut
    !
    vrf mgmt
     exit-vrf
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.5/32
    !
    interface bond1
     no shutdown
     description dut -> xs
     ! no ip address
    !
    interface eth1
     no shutdown
     description dut -> xs
     ! no ip address
    !
    interface eth2
     no shutdown
     description dut -> xs
     ! no ip address
    !
    interface eth3
     no shutdown
     description [Access VLAN v1] dut -> h1
     ! no ip address
    !
    interface eth4
     no shutdown
     description [Access VLAN v2] dut -> h3
     ! no ip address
    !
    interface bond1.1000
     no shutdown
     description [SubIf VLAN v1] dut -> xs
     ! no ip address
    !
    interface bond1.1001
     no shutdown
     description [SubIf VLAN v2] dut -> xs
     ! no ip address
    !
    interface vlan1000
     no shutdown
     description VLAN v1 (1000) -> [h1,xs,h2]
     ip address 172.16.0.5/24
    !
    interface vlan1001
     no shutdown
     description VLAN v2 (1001) -> [h3,xs,h4]
     ip address 172.16.1.5/24
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [xs] => 
  msg: |-
    initial configuration for xs
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth2.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth3.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth4.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    ip link set eth2 mtu 1500
    ip link set eth3 mtu 1500
    ip link set eth4 mtu 1500
  
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname xs
    !
    vrf mgmt
     exit-vrf
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.6/32
    !
    interface bond1
     no shutdown
     description xs -> dut
     ! no ip address
    !
    interface eth1
     no shutdown
     description xs -> dut
     ! no ip address
    !
    interface eth2
     no shutdown
     description xs -> dut
     ! no ip address
    !
    interface eth3
     no shutdown
     description [Access VLAN v1] xs -> h2
     ! no ip address
    !
    interface eth4
     no shutdown
     description [Access VLAN v2] xs -> h4
     ! no ip address
    !
    interface bond1.1000
     no shutdown
     description [SubIf VLAN v1] xs -> dut
     ! no ip address
    !
    interface bond1.1001
     no shutdown
     description [SubIf VLAN v2] xs -> dut
     ! no ip address
    !
    interface vlan1000
     no shutdown
     description VLAN v1 (1000) -> [h1,dut,h2]
     ip address 172.16.0.6/24
    !
    interface vlan1001
     no shutdown
     description VLAN v2 (1001) -> [h3,dut,h4]
     ip address 172.16.1.6/24
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [h1] => 
  msg: |-
    initial configuration for h1
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing
    #
    ip link set dev eth1 up
    set +e
    ip addr del 172.16.0.1/24 dev eth1 2>/dev/null
    set -e
    ip addr add 172.16.0.1/24 dev eth1
    ip link set eth1 mtu 1500
    #
    # Add routes to IPv4 address pools pointing to the first neighbor on the first link
    #
    # If you need anything better, use FRR instead of Linux and start routing (or use IPv6)
    #
    # lan prefix: 172.16.0.0/16 local subnet: 172.16.0.0/24
    set +e
    ip route del 172.16.0.0/16 2>/dev/null
    set -e
    ip route add 172.16.0.0/16 via 172.16.0.5
    # loopback prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.0.0.0/24 2>/dev/null
    set -e
    ip route add 10.0.0.0/24 via 172.16.0.5
    # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.0.0/24
    # p2p prefix: 10.1.0.0/16 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.1.0.0/16 2>/dev/null
    set -e
    ip route add 10.1.0.0/16 via 172.16.0.5
    # router_id prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24
    # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.2.0.0/24 2>/dev/null
    set -e
    ip route add 10.2.0.0/24 via 172.16.0.5
    #
    # Print the final routing table
    ip route
ok: [h3] => 
  msg: |-
    initial configuration for h3
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing
    #
    ip link set dev eth1 up
    set +e
    ip addr del 172.16.1.3/24 dev eth1 2>/dev/null
    set -e
    ip addr add 172.16.1.3/24 dev eth1
    ip link set eth1 mtu 1500
    #
    # Add routes to IPv4 address pools pointing to the first neighbor on the first link
    #
    # If you need anything better, use FRR instead of Linux and start routing (or use IPv6)
    #
    # lan prefix: 172.16.0.0/16 local subnet: 172.16.1.0/24
    set +e
    ip route del 172.16.0.0/16 2>/dev/null
    set -e
    ip route add 172.16.0.0/16 via 172.16.1.5
    # loopback prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.0.0.0/24 2>/dev/null
    set -e
    ip route add 10.0.0.0/24 via 172.16.1.5
    # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.1.0/24
    # p2p prefix: 10.1.0.0/16 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.1.0.0/16 2>/dev/null
    set -e
    ip route add 10.1.0.0/16 via 172.16.1.5
    # router_id prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24
    # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.2.0.0/24 2>/dev/null
    set -e
    ip route add 10.2.0.0/24 via 172.16.1.5
    #
    # Print the final routing table
    ip route
ok: [h2] => 
  msg: |-
    initial configuration for h2
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing
    #
    ip link set dev eth1 up
    set +e
    ip addr del 172.16.0.2/24 dev eth1 2>/dev/null
    set -e
    ip addr add 172.16.0.2/24 dev eth1
    ip link set eth1 mtu 1500
    #
    # Add routes to IPv4 address pools pointing to the first neighbor on the first link
    #
    # If you need anything better, use FRR instead of Linux and start routing (or use IPv6)
    #
    # lan prefix: 172.16.0.0/16 local subnet: 172.16.0.0/24
    set +e
    ip route del 172.16.0.0/16 2>/dev/null
    set -e
    ip route add 172.16.0.0/16 via 172.16.0.6
    # loopback prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.0.0.0/24 2>/dev/null
    set -e
    ip route add 10.0.0.0/24 via 172.16.0.6
    # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.0.0/24
    # p2p prefix: 10.1.0.0/16 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.1.0.0/16 2>/dev/null
    set -e
    ip route add 10.1.0.0/16 via 172.16.0.6
    # router_id prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24
    # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.2.0.0/24 2>/dev/null
    set -e
    ip route add 10.2.0.0/24 via 172.16.0.6
    #
    # Print the final routing table
    ip route
ok: [h4] => 
  msg: |-
    initial configuration for h4
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing
    #
    ip link set dev eth1 up
    set +e
    ip addr del 172.16.1.4/24 dev eth1 2>/dev/null
    set -e
    ip addr add 172.16.1.4/24 dev eth1
    ip link set eth1 mtu 1500
    #
    # Add routes to IPv4 address pools pointing to the first neighbor on the first link
    #
    # If you need anything better, use FRR instead of Linux and start routing (or use IPv6)
    #
    # lan prefix: 172.16.0.0/16 local subnet: 172.16.1.0/24
    set +e
    ip route del 172.16.0.0/16 2>/dev/null
    set -e
    ip route add 172.16.0.0/16 via 172.16.1.6
    # loopback prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.0.0.0/24 2>/dev/null
    set -e
    ip route add 10.0.0.0/24 via 172.16.1.6
    # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.1.0/24
    # p2p prefix: 10.1.0.0/16 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.1.0.0/16 2>/dev/null
    set -e
    ip route add 10.1.0.0/16 via 172.16.1.6
    # router_id prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24
    # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.2.0.0/24 2>/dev/null
    set -e
    ip route add 10.2.0.0/24 via 172.16.1.6
    #
    # Print the final routing table
    ip route

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h4]
ok: [h2]
ok: [h3]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/initial-clab.yml for dut, xs
included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2, h3, h4

TASK [Attempt to load VRF kernel module] ***************************************
changed: [dut -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [dut]
skipping: [xs]

TASK [include_tasks] ***********************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/deploy-config.yml for dut, xs

TASK [template] ****************************************************************
changed: [dut]
changed: [xs]

TASK [set_fact] ****************************************************************
ok: [dut]
ok: [xs]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
changed: [xs]
changed: [dut]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
skipping: [dut]
skipping: [xs]

TASK [set_fact] ****************************************************************
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]

TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] ***
changed: [h1 -> localhost]
changed: [h2 -> localhost]
changed: [h3 -> localhost]
changed: [h4 -> localhost]

TASK [Initial container configuration via /tmp/config-EZYRUKXo-h1.sh] **********
changed: [h1 -> localhost]
changed: [h2 -> localhost]
changed: [h3 -> localhost]
changed: [h4 -> localhost]

TASK [file] ********************************************************************
changed: [h1 -> localhost]
changed: [h4 -> localhost]
changed: [h3 -> localhost]
changed: [h2 -> localhost]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [xs]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xs => (item=lag)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xs => (item=vlan)

TASK [Figure out whether to deploy the module lag on current device] ***********
ok: [dut]
ok: [xs]

TASK [Find configuration template for lag] *************************************
ok: [dut]
ok: [xs]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    lag configuration for dut
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
    #
    # Create bonds for LAGs, if any. Requires kernel bonding module loaded
    #
    ip link add dev bond1 type bond mode 802.3ad xmit_hash_policy encap3+4 lacp_rate fast lacp_active on
    ip link set dev bond1 down
    ip link set dev eth1 down
    ip link set dev eth2 down
  
    ip link set dev eth1 master bond1
    ip link set dev eth1 up
    ip link set dev eth2 master bond1
    ip link set dev eth2 up
    ip link set dev bond1 up
    exit 0
ok: [xs] => 
  msg: |-
    lag configuration for xs
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
    #
    # Create bonds for LAGs, if any. Requires kernel bonding module loaded
    #
    ip link add dev bond1 type bond mode 802.3ad xmit_hash_policy encap3+4 lacp_rate fast lacp_active on
    ip link set dev bond1 down
    ip link set dev eth1 down
    ip link set dev eth2 down
  
    ip link set dev eth1 master bond1
    ip link set dev eth1 up
    ip link set dev eth2 master bond1
    ip link set dev eth2 up
    ip link set dev bond1 up
    exit 0

TASK [Find configuration deployment deploy_script for lag] *********************
ok: [dut]
ok: [xs]

TASK [Deploy lag configuration] ************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for dut, xs

TASK [template] ****************************************************************
changed: [xs]
changed: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]
ok: [xs]

TASK [run /tmp/config.sh to deploy lag config from /home/pipi/net101/tools/netsim/ansible/templates/lag/frr.j2] ***
changed: [xs]
changed: [dut]

TASK [run vtysh to import lag config from /home/pipi/net101/tools/netsim/ansible/templates/lag/frr.j2] ***
skipping: [dut]
skipping: [xs]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [dut]
ok: [xs]

TASK [Find configuration template for vlan] ************************************
ok: [dut]
ok: [xs]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    vlan configuration for dut
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
    if [ ! -e /sys/devices/virtual/net/bond1.1000 ]; then
      ip link add link bond1 name bond1.1000 type vlan id 1000
      ip link set dev bond1.1000 up
    fi
    if [ ! -e /sys/devices/virtual/net/bond1.1001 ]; then
      ip link add link bond1 name bond1.1001 type vlan id 1001
      ip link set dev bond1.1001 up
    fi
    if [ ! -e /sys/devices/virtual/net/vlan1000 ]; then
      brctl addbr vlan1000
  
  
      ip link set dev vlan1000 up
      ip addr flush dev vlan1000
      ip addr add 172.16.0.5/24 dev vlan1000
    fi
    if [ ! -e /sys/devices/virtual/net/vlan1001 ]; then
      brctl addbr vlan1001
  
  
      ip link set dev vlan1001 up
      ip addr flush dev vlan1001
      ip addr add 172.16.1.5/24 dev vlan1001
    fi
  
    brctl addif vlan1000 eth3
    brctl addif vlan1001 eth4
    brctl addif vlan1000 bond1.1000
    brctl addif vlan1001 bond1.1001
    exit 0
ok: [xs] => 
  msg: |-
    vlan configuration for xs
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
    if [ ! -e /sys/devices/virtual/net/bond1.1000 ]; then
      ip link add link bond1 name bond1.1000 type vlan id 1000
      ip link set dev bond1.1000 up
    fi
    if [ ! -e /sys/devices/virtual/net/bond1.1001 ]; then
      ip link add link bond1 name bond1.1001 type vlan id 1001
      ip link set dev bond1.1001 up
    fi
    if [ ! -e /sys/devices/virtual/net/vlan1000 ]; then
      brctl addbr vlan1000
  
  
      ip link set dev vlan1000 up
      ip addr flush dev vlan1000
      ip addr add 172.16.0.6/24 dev vlan1000
    fi
    if [ ! -e /sys/devices/virtual/net/vlan1001 ]; then
      brctl addbr vlan1001
  
  
      ip link set dev vlan1001 up
      ip addr flush dev vlan1001
      ip addr add 172.16.1.6/24 dev vlan1001
    fi
  
    brctl addif vlan1000 eth3
    brctl addif vlan1001 eth4
    brctl addif vlan1000 bond1.1000
    brctl addif vlan1001 bond1.1001
    exit 0

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [dut]
ok: [xs]

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for dut, xs

TASK [template] ****************************************************************
changed: [xs]
changed: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]
ok: [xs]

TASK [run /tmp/config.sh to deploy vlan config from /home/pipi/net101/tools/netsim/ansible/templates/vlan/frr.j2] ***
changed: [xs]
changed: [dut]

TASK [run vtysh to import vlan config from /home/pipi/net101/tools/netsim/ansible/templates/vlan/frr.j2] ***
skipping: [dut]
skipping: [xs]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
dut                        : ok=32   changed=7    unreachable=0    failed=0    skipped=5    rescued=0    ignored=0   
h1                         : ok=12   changed=3    unreachable=0    failed=0    skipped=1    rescued=0    ignored=0   
h2                         : ok=12   changed=3    unreachable=0    failed=0    skipped=1    rescued=0    ignored=0   
h3                         : ok=12   changed=3    unreachable=0    failed=0    skipped=1    rescued=0    ignored=0   
h4                         : ok=12   changed=3    unreachable=0    failed=0    skipped=1    rescued=0    ignored=0   
xs                         : ok=31   changed=6    unreachable=0    failed=0    skipped=5    rescued=0    ignored=0   



The device under test is a layer-2 switch connected with a LAG VLAN trunk to
another layer-2 switch. Host in the same VLAN should be able to ping each
other.