[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] skipping: [srv] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/iol-clab.yml for dut TASK [Check if 'sshpass' is installed] ***************************************** changed: [dut -> localhost] TASK [Execute local ssh command to check iol readiness] ************************ FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check iol readiness (20 retries left). changed: [dut -> localhost] TASK [Confirm dut SSH server works] ******************************************** ok: [dut] => msg: Node dut is ready. TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for h1, h2, srv, dut TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:2::1/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:2::1/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:2:1::2/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:2:1::2/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [srv] => msg: |- initial configuration for srv ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:2:2::3/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:2:2::3/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [dut] => msg: |- initial configuration for dut ========================================= hostname dut ! no ip domain lookup ! lldp run ! ip host dut-blue 2001:db8:2:1::4 ip host dut-common 2001:db8:2:2::4 ip host dut-red 2001:db8:2::4 ip host h1 2001:db8:2::1 ip host h2 2001:db8:2:1::2 ip host srv 2001:db8:2:2::3 ! ipv6 unicast-routing ! vrf definition blue rd 65000:2 route-target import 65000:2 route-target import 65000:3 route-target export 65000:2 ! address-family ipv6 exit-address-family ! vrf definition common rd 65000:3 route-target import 65000:1 route-target import 65000:2 route-target import 65000:3 route-target export 65000:3 ! address-family ipv6 exit-address-family ! vrf definition red rd 65000:1 route-target import 65000:1 route-target import 65000:3 route-target export 65000:1 ! address-family ipv6 exit-address-family ! ! ! interface Loopback0 ipv6 address 2001:DB8:1:4::1/64 ! interface Ethernet0/0 no lldp transmit no lldp receive ! interface Ethernet0/1 no shutdown vrf forwarding red description dut -> h1 [stub] mtu 1500 ipv6 address 2001:DB8:2::4/64 ! interface Ethernet0/2 no shutdown vrf forwarding blue description dut -> h2 [stub] mtu 1500 ipv6 address 2001:DB8:2:1::4/64 ! interface Ethernet0/3 no shutdown vrf forwarding common description dut -> srv [stub] mtu 1500 ipv6 address 2001:DB8:2:2::4/64 ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2, srv included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut TASK [set_fact] **************************************************************** ok: [h1] ok: [h2] ok: [srv] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [srv -> localhost] changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Initial container configuration via /tmp/config-aVnIvbAT-h1.sh] ********** changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [srv -> localhost] TASK [file] ******************************************************************** changed: [srv -> localhost] changed: [h2 -> localhost] changed: [h1 -> localhost] TASK [ios_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/ios.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [dut] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut => (item=vrf) TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [dut] TASK [Find configuration template for vrf] ************************************* ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- vrf configuration for dut ========================================= ! router bgp 65000 address-family ipv6 vrf blue bgp router-id 10.0.0.4 redistribute connected ! ! address-family ipv6 vrf common bgp router-id 10.0.0.4 redistribute connected ! ! address-family ipv6 vrf red bgp router-id 10.0.0.4 redistribute connected ! ! TASK [Find configuration deployment deploy_script for vrf] ********************* ok: [dut] TASK [Deploy vrf configuration] ************************************************ included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut TASK [ios_config: deploying vrf from /home/pipi/net101/tools/netsim/ansible/templates/vrf/ios.j2] *** changed: [dut] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=21 changed=4 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 h1 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h2 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 srv : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 The device under test has two user VRFs and a common services VRF. The lab tests inter-VRF route leaking between common VRF and other VRFs * h1 and h2 should be able to ping srv but not each other