[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [r1] ok: [r2] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [r1] ok: [r2] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/ioll2-clab.yml for r1, r2 TASK [Check if 'sshpass' is installed] ***************************************** changed: [r1 -> localhost] TASK [Execute local ssh command to check ioll2 readiness] ********************** FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check ioll2 readiness (20 retries left). FAILED - RETRYING: [r2 -> localhost]: Execute local ssh command to check ioll2 readiness (20 retries left). changed: [r1 -> localhost] changed: [r2 -> localhost] TASK [Confirm r1 SSH server works] ********************************************* ok: [r1] => msg: Node r1 is ready. ok: [r2] => msg: Node r2 is ready. TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for h1, h2, r1, r2 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [r1] ok: [r2] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [r1] ok: [r2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:1::1/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:1::1/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:1:1::2/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:1:1::2/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [r1] => msg: |- initial configuration for r1 ========================================= hostname r1 ! no ip domain lookup ! lldp run ! ! ipv6 unicast-routing ! ! interface Loopback0 ipv6 address 2001:DB8:0:3::1/64 ! interface Ethernet0/0 no lldp transmit no lldp receive ! interface Ethernet0/1 no shutdown no switchport description r1 -> h1 [stub] mtu 1500 ipv6 address 2001:DB8:1::3/64 ! interface Ethernet0/2 no shutdown no switchport description r1 -> r2 mtu 1500 ipv6 enable ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming ok: [r2] => msg: |- initial configuration for r2 ========================================= hostname r2 ! no ip domain lookup ! lldp run ! ! ipv6 unicast-routing ! ! interface Loopback0 ipv6 address 2001:DB8:0:4::1/64 ! interface Ethernet0/0 no lldp transmit no lldp receive ! interface Ethernet0/1 no shutdown no switchport description r2 -> r1 mtu 1500 ipv6 enable ! interface Ethernet0/2 no shutdown no switchport description r2 -> h2 [stub] mtu 1500 ipv6 address 2001:DB8:1:1::4/64 ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [r1] ok: [r2] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for r1, r2 TASK [set_fact] **************************************************************** ok: [h1] ok: [h2] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Initial container configuration via /tmp/config-YldyJbee-h1.sh] ********** changed: [h2 -> localhost] changed: [h1 -> localhost] TASK [file] ******************************************************************** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [ios_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/ios.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [r1] changed: [r2] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [r1] ok: [r2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for r1, r2 => (item=eigrp) TASK [Figure out whether to deploy the module eigrp on current device] ********* ok: [r1] ok: [r2] TASK [Find configuration template for eigrp] *********************************** ok: [r1] ok: [r2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [r1] => msg: |- eigrp configuration for r1 ========================================= ipv6 router eigrp 2 eigrp router-id 10.0.0.3 passive-interface Ethernet0/1 ! interface Loopback0 ipv6 eigrp 2 ! interface Ethernet0/1 ipv6 eigrp 2 ! interface Ethernet0/2 ipv6 eigrp 2 ! ok: [r2] => msg: |- eigrp configuration for r2 ========================================= ipv6 router eigrp 2 eigrp router-id 10.0.0.4 passive-interface Ethernet0/2 ! interface Loopback0 ipv6 eigrp 2 ! interface Ethernet0/1 ipv6 eigrp 2 ! interface Ethernet0/2 ipv6 eigrp 2 ! TASK [Find configuration deployment deploy_script for eigrp] ******************* ok: [r1] ok: [r2] TASK [Deploy eigrp configuration] ********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for r1, r2 TASK [ios_config: deploying eigrp from /home/pipi/net101/tools/netsim/ansible/templates/eigrp/ios.j2] *** changed: [r1] changed: [r2] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h2 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 r1 : ok=21 changed=4 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 r2 : ok=20 changed=3 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0