[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Find device readiness script] ********************************************
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Wait for device to become ready] *****************************************
skipping: [x1]
skipping: [x2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/ioll2-clab.yml for dut

TASK [Check if 'sshpass' is installed] *****************************************
ok: [dut -> localhost]

TASK [Check for 'timeout' command] *********************************************
ok: [dut -> localhost]

TASK [Execute local ssh command to check ioll2 readiness] **********************
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ioll2 readiness (20 retries left).
ok: [dut -> localhost]

TASK [Confirm dut SSH server works] ********************************************
ok: [dut] => 
  msg: Node dut is ready.

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for x1, x2, dut

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Find configuration template for normalize] *******************************
ok: [x1]
ok: [x2]
ok: [dut]

TASK [fail] ********************************************************************
skipping: [x1]
skipping: [x2]
skipping: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [x1]
skipping: [x2]
ok: [dut] => 
  msg: |-
    normalize configuration for dut
    =========================================
    !
    interface Ethernet0/1
     no switchport
     mac-address 52dc.cafe.0101
    !
    interface Ethernet0/2
     no switchport
     mac-address 52dc.cafe.0102
    !
    interface Ethernet0/3
     no switchport
     mac-address 52dc.cafe.0103

TASK [Find configuration deployment deploy_script for normalize] ***************
skipping: [x1]
skipping: [x2]
ok: [dut]

TASK [Deploy normalize configuration] ******************************************
skipping: [x1]
skipping: [x2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut

TASK [ios_config: deploying normalize from /home/pipi/net101/tools/netsim/ansible/templates/normalize/ioll2.j2] ***
[WARNING]: To ensure idempotency and correct diff the input configuration lines
should be similar to how they appear if present in the running configuration on
device including the indentation
changed: [dut]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for x1, x2, dut

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Find configuration template for initial] *********************************
ok: [x1]
ok: [x2]
ok: [dut]

TASK [fail] ********************************************************************
skipping: [x1]
skipping: [x2]
skipping: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => 
  msg: |-
    initial configuration for x1
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)# "
    echo
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks, stub and lag/bond devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
    sysctl -qw net.ipv6.conf.eth2.autoconf=0
    sysctl -qw net.ipv6.conf.eth2.accept_ra=0
    ip link set eth2 down
    ip link set eth2 up
    sysctl -qw net.ipv6.conf.eth3.autoconf=0
    sysctl -qw net.ipv6.conf.eth3.accept_ra=0
    ip link set eth3 down
    ip link set eth3 up
    sysctl -qw net.ipv6.conf.eth4.autoconf=0
    sysctl -qw net.ipv6.conf.eth4.accept_ra=0
    ip link set eth4 down
    ip link set eth4 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set dev eth1 mtu 1500
    ip link set dev eth2 mtu 1500
    ip link set dev eth3 mtu 1500
    ip link set dev eth4 mtu 1500
  
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname x1
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.2/32
     ipv6 address 2001:db8:cafe:42::1/64
    !
    interface eth1
     no shutdown
     description x1 -> dut
     ip address 10.1.0.2/30
     ipv6 address 2001:db8:3::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    interface eth2
     no shutdown
     description x1 -> x2
     ip address 10.1.0.5/30
     ipv6 address 2001:db8:3:1::1/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    interface eth3
     no shutdown
     description x1 -> dut
     ip address 10.1.0.10/30
     ipv6 address 2001:db8:3:2::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    interface eth4
     no shutdown
     description x1 -> dut
     ip address 10.1.0.14/30
     ipv6 address 2001:db8:3:3::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [x2] => 
  msg: |-
    initial configuration for x2
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)# "
    echo
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks, stub and lag/bond devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set dev eth1 mtu 1500
  
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname x2
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.3/32
     ipv6 address 2001:db8:cafe:43::1/64
    !
    interface eth1
     no shutdown
     description x2 -> x1
     ip address 10.1.0.6/30
     ipv6 address 2001:db8:3:1::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [dut] => 
  msg: |-
    initial configuration for dut
    =========================================
    hostname dut
    !
    no ip domain lookup
    !
    lldp run
    !
    ip host dut-transport 10.1.0.9 10.1.0.13
    ip host x1 10.0.0.2 10.1.0.2 10.1.0.5 10.1.0.10 10.1.0.14
    ip host x2 10.0.0.3 10.1.0.6
    !
    ip routing
    !
    ipv6 unicast-routing
    !
    vrf definition transport
     rd 65000:1
     route-target import 65000:1
     route-target export 65000:1
    !
     address-family ipv4
     exit-address-family
    !
     address-family ipv6
     exit-address-family
    !
  
    !
    !
    interface Loopback0
     ip address 10.0.0.1 255.255.255.255
     ipv6 address 2001:DB8:1:1::1/64
    !
    interface Ethernet0/0
     no lldp transmit
     no lldp receive
    !
    interface Ethernet0/1
     no switchport
     description dut -> x1
     mtu 1500
     ip address 10.1.0.1 255.255.255.252
     ipv6 address 2001:DB8:3::1/64
     no shutdown
    !
    interface Ethernet0/2
     no switchport
     vrf forwarding transport
     description dut -> x1
     mtu 1500
     ip address 10.1.0.9 255.255.255.252
     ipv6 address 2001:DB8:3:2::1/64
     no shutdown
    !
    interface Ethernet0/3
     no switchport
     vrf forwarding transport
     description dut -> x1
     mtu 1500
     ip address 10.1.0.13 255.255.255.252
     ipv6 address 2001:DB8:3:3::1/64
     no shutdown
    !
    !
    line vty 0 4
     exec-timeout 0 0
    !
    no banner exec
    no banner login
    no banner incoming

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/initial-clab.yml for x1, x2
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut

TASK [Attempt to load VRF kernel module] ***************************************
changed: [x1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [x1]
skipping: [x2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/deploy-config.yml for x1, x2

TASK [template] ****************************************************************
changed: [x1]
changed: [x2]

TASK [set_fact] ****************************************************************
ok: [x1]
ok: [x2]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
changed: [x2]
changed: [x1]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
skipping: [x1]
skipping: [x2]

TASK [ios_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/ios.j2] ***
changed: [dut]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=routing)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=ospf)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=vrf)

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Find configuration template for routing] *********************************
skipping: [x1]
skipping: [x2]
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [x1]
skipping: [x2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [x1]
skipping: [x2]
ok: [dut] => 
  msg: |-
    routing configuration for dut
    =========================================
    !
    !
    ! AS-path access lists
    !
    !
    ! Static routes
    !
    ip route vrf transport 10.0.0.2 255.255.255.255 Ethernet0/2 10.1.0.10
    ip route vrf transport 10.0.0.2 255.255.255.255 Ethernet0/3 10.1.0.14
    ipv6 route vrf transport 2001:db8:cafe:42::/64 Ethernet0/2 2001:db8:3:2::2
    ipv6 route vrf transport 2001:db8:cafe:42::/64 Ethernet0/3 2001:db8:3:3::2
    ip route vrf transport 10.0.0.3 255.255.255.255 Ethernet0/2 10.1.0.10
    ip route vrf transport 10.0.0.3 255.255.255.255 Ethernet0/3 10.1.0.14
    ipv6 route vrf transport 2001:db8:cafe:43::/64 Ethernet0/2 2001:db8:3:2::2
    ipv6 route vrf transport 2001:db8:cafe:43::/64 Ethernet0/3 2001:db8:3:3::2

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [x1]
skipping: [x2]
ok: [dut]

TASK [Deploy routing configuration] ********************************************
skipping: [x1]
skipping: [x2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut

TASK [ios_config: deploying routing from /home/pipi/net101/tools/netsim/ansible/templates/routing/ios.j2] ***
changed: [dut]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Find configuration template for ospf] ************************************
skipping: [dut]
ok: [x1]
ok: [x2]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [x1]
skipping: [x2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [dut]
ok: [x1] => 
  msg: |-
    ospf configuration for x1
    =========================================
    !
    ! OSPFv2 FRR configuration
    !
    router ospf
     ospf router-id 10.0.0.2
     timers throttle spf 10 50 500
     timers throttle lsa all 100
     timers lsa min-arrival 100
  
  
    exit
    !
    interface lo
    !
     ip ospf area 0.0.0.0
    !
    interface eth1
    ! x1 -> dut
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
    interface eth2
    ! x1 -> x2
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
    interface eth3
    ! x1 -> dut
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
    interface eth4
    ! x1 -> dut
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
  
    !
    ! OSPFv3 FRR configuration
    !
    interface lo
    !
     ipv6 ospf6 area 0.0.0.0
    !
    interface eth1
    ! x1 -> dut
     ipv6 ospf6 area 0.0.0.0
     ipv6 ospf6 network point-to-point
    !
    interface eth2
    ! x1 -> x2
     ipv6 ospf6 area 0.0.0.0
     ipv6 ospf6 network point-to-point
    !
    interface eth3
    ! x1 -> dut
     ipv6 ospf6 area 0.0.0.0
     ipv6 ospf6 network point-to-point
    !
    interface eth4
    ! x1 -> dut
     ipv6 ospf6 area 0.0.0.0
     ipv6 ospf6 network point-to-point
    !
    !
    router ospf6
     ospf6 router-id 10.0.0.2
     timers lsa min-arrival 100
     timers throttle spf 10 50 500
  
  
    exit
  
    !
    do write
ok: [x2] => 
  msg: |-
    ospf configuration for x2
    =========================================
    !
    ! OSPFv2 FRR configuration
    !
    router ospf
     ospf router-id 10.0.0.3
     timers throttle spf 10 50 500
     timers throttle lsa all 100
     timers lsa min-arrival 100
  
  
    exit
    !
    interface lo
    !
     ip ospf area 0.0.0.0
    !
    interface eth1
    ! x2 -> x1
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
  
    !
    ! OSPFv3 FRR configuration
    !
    interface lo
    !
     ipv6 ospf6 area 0.0.0.0
    !
    interface eth1
    ! x2 -> x1
     ipv6 ospf6 area 0.0.0.0
     ipv6 ospf6 network point-to-point
    !
    !
    router ospf6
     ospf6 router-id 10.0.0.3
     timers lsa min-arrival 100
     timers throttle spf 10 50 500
  
  
    exit
  
    !
    do write

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [dut]
ok: [x1]
ok: [x2]

TASK [Deploy ospf configuration] ***********************************************
skipping: [dut]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for x1, x2

TASK [template] ****************************************************************
changed: [x1]
changed: [x2]

TASK [set_fact] ****************************************************************
ok: [x1]
ok: [x2]

TASK [run /tmp/config.sh to deploy ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/frr.j2] ***
skipping: [x1]
skipping: [x2]

TASK [run vtysh to import ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/frr.j2] ***
changed: [x2]
changed: [x1]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [x1]
ok: [x2]
ok: [dut]

TASK [Find configuration template for vrf] *************************************
skipping: [x1]
skipping: [x2]
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [x1]
skipping: [x2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [x1]
skipping: [x2]
ok: [dut] => 
  msg: |-
    vrf configuration for dut
    =========================================

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [x1]
skipping: [x2]
ok: [dut]

TASK [Deploy vrf configuration] ************************************************
skipping: [x1]
skipping: [x2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut

TASK [ios_config: deploying vrf from /home/pipi/net101/tools/netsim/ansible/templates/vrf/ios.j2] ***
ok: [dut]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
dut                        : ok=38   changed=3    unreachable=0    failed=0    skipped=9    rescued=0    ignored=0   
x1                         : ok=30   changed=5    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   
x2                         : ok=29   changed=4    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   



Use this topology to test VRF IPv4 and IPv6 static routes. DUT has
to have static routes for loopback addresses of X1 and X2.