[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [r1] ok: [s2] ok: [s1] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [r1] ok: [s1] ok: [s2] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/ioll2-clab.yml for r1, s1, s2 TASK [Check if 'sshpass' is installed] ***************************************** changed: [r1 -> localhost] TASK [Execute local ssh command to check ioll2 readiness] ********************** FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ioll2 readiness (20 retries left). FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check ioll2 readiness (20 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check ioll2 readiness (20 retries left). changed: [s1 -> localhost] changed: [r1 -> localhost] changed: [s2 -> localhost] TASK [Confirm r1 SSH server works] ********************************************* ok: [r1] => msg: Node r1 is ready. ok: [s1] => msg: Node s1 is ready. ok: [s2] => msg: Node s2 is ready. TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for h1, h2, r1, s1, s2 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [r1] ok: [s1] ok: [s2] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [r1] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.0.1/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.1/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.0.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.0.5 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.0.5 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.0.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.0.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.0.5 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.0.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.0.5 # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.1.2/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.2/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.1.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.1.5 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.1.5 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.1.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.1.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.1.5 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.1.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.1.5 # # Print the final routing table ip route ok: [r1] => msg: |- initial configuration for r1 ========================================= hostname r1 ! no ip domain lookup ! lldp run ! ip host h1 172.16.0.1 ip host h2 172.16.1.2 ip host s1 10.0.0.3 ip host s2 10.0.0.4 ! ip routing ! ! interface Loopback0 ip address 10.0.0.5 255.255.255.255 ! interface Ethernet0/0 no lldp transmit no lldp receive ! interface Ethernet0/1 no shutdown no switchport description r1 -> [h1,s1,s2] mtu 1500 ip address 172.16.0.5 255.255.255.0 ! interface Ethernet0/2 no shutdown no switchport description r1 -> [h2,s1,s2] mtu 1500 ip address 172.16.1.5 255.255.255.0 ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming ok: [s2] => msg: |- initial configuration for s2 ========================================= hostname s2 ! no ip domain lookup ! lldp run ! ip host h1 172.16.0.1 ip host h2 172.16.1.2 ip host r1 10.0.0.5 172.16.0.5 172.16.1.5 ip host s1 10.0.0.3 ! ip routing ! vlan 701 name blue ! vlan 700 name red ! ! ! interface Loopback0 ip address 10.0.0.4 255.255.255.255 ! interface Ethernet0/0 no lldp transmit no lldp receive ! interface Ethernet0/1 no shutdown no switchport description s2 -> s1 mtu 1500 ! interface Ethernet0/2 no shutdown no switchport mtu 1500 ! interface Ethernet0/3 no shutdown no switchport mtu 1500 ! interface Vlan700 no shutdown description VLAN red (700) -> [h1,s1,r1] mac-address 4001.cafe.0406 ! interface Vlan701 no shutdown description VLAN blue (701) -> [h2,s1,r1] mac-address 4001.cafe.0407 ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming ok: [s1] => msg: |- initial configuration for s1 ========================================= hostname s1 ! no ip domain lookup ! lldp run ! ip host h1 172.16.0.1 ip host h2 172.16.1.2 ip host r1 10.0.0.5 172.16.0.5 172.16.1.5 ip host s2 10.0.0.4 ! ip routing ! vlan 701 name blue ! vlan 700 name red ! ! ! interface Loopback0 ip address 10.0.0.3 255.255.255.255 ! interface Ethernet0/0 no lldp transmit no lldp receive ! interface Ethernet0/1 no shutdown no switchport description s1 -> s2 mtu 1500 ! interface Ethernet0/2 no shutdown no switchport mtu 1500 ! interface Ethernet0/3 no shutdown no switchport mtu 1500 ! interface Vlan700 no shutdown description VLAN red (700) -> [h1,s2,r1] mac-address 4001.cafe.0306 ! interface Vlan701 no shutdown description VLAN blue (701) -> [h2,s2,r1] mac-address 4001.cafe.0307 ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [r1] ok: [s1] ok: [s2] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for r1, s1, s2 TASK [set_fact] **************************************************************** ok: [h1] ok: [h2] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Initial container configuration via /tmp/config-Vljrzmyi-h1.sh] ********** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [file] ******************************************************************** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [ios_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/ios.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [r1] changed: [s2] changed: [s1] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [s1] ok: [s2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=vlan) TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [s1] ok: [s2] TASK [Find configuration template for vlan] ************************************ ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [s1] => msg: |- vlan configuration for s1 ========================================= vlan 701 name blue ! vlan 700 name red ! ! interface Ethernet0/1 switchport switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 700,701 ! interface Ethernet0/2 switchport switchport access vlan 700 ! interface Ethernet0/3 switchport switchport access vlan 701 ok: [s2] => msg: |- vlan configuration for s2 ========================================= vlan 701 name blue ! vlan 700 name red ! ! interface Ethernet0/1 switchport switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 700,701 ! interface Ethernet0/2 switchport switchport access vlan 700 ! interface Ethernet0/3 switchport switchport access vlan 701 TASK [Find configuration deployment deploy_script for vlan] ******************** ok: [s1] ok: [s2] TASK [Deploy vlan configuration] *********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for s1, s2 TASK [ios_config: deploying vlan from /home/pipi/net101/tools/netsim/ansible/templates/vlan/ioll2.j2] *** changed: [s1] changed: [s2] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h2 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 r1 : ok=13 changed=3 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 s1 : ok=20 changed=3 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 s2 : ok=20 changed=3 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 The devices under test are simple bridges with a VLAN trunk between them. An external router with two interfaces (one per VLAN) is attached to one of them. * h1 and h2 should be able to ping each other Please note it might take a while for the lab to work due to STP learning phase