Warning in ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
... Ansible core version 2.19 introduced breaking changes in templates and playbooks
... We tested netlab core with Ansible version 12.x but not every device template
... You might want to downgrade Ansible to version 11.10 or lower.
... Use 'netlab install ansible' on Ubuntu to do that
... Finally, please open a GitHub issue if you experience errors/crashes
... Set defaults.ansible.warnings.ver12 to False to hide this warning
 [INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[CREATED] rr: initial,ospf,bgp,evpn
[CREATED] s1: normalize,initial,vlan,ospf,bgp,vxlan,evpn,_n_s1
[CREATED] s2: initial,vlan,ospf,bgp,vxlan,evpn
[CREATED] h1: initial,routing
[CREATED] h2: initial,routing
 [INFO] Executing initial configuration for node h1 (namespace clab-
          ml_23-h1)
 [INFO] Executing routing configuration for node h1 (namespace clab-
          ml_23-h1)
 [INFO] Executing initial configuration for node h2 (namespace clab-
          ml_23-h2)
 [INFO] Executing routing configuration for node h2 (namespace clab-
          ml_23-h2)

 [INFO] Starting Ansible playbook to deploy the rest of the
          configurations
[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned
[WARNING]: Found variable using reserved name 'hosts'.
Origin: /work/netlab_cicd/hogs/group_vars/all/topology.yml:159:1

157     ipv4: 10.2.0.0/24
158     prefix: 32
159 hosts:
    ^ column 1


PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [s2]
ok: [h1]
ok: [h2]
ok: [rr]
ok: [s1]

TASK [Generic readiness tests] *************************************************
skipping: [s2]
skipping: [h1]
skipping: [h2]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/ssh.yml for rr, s1 => (item=ssh)

TASK [Check if 'sshpass' is installed] *****************************************
ok: [rr -> localhost]

TASK [Check for 'timeout' command] *********************************************
ok: [rr -> localhost]
ok: [s1 -> localhost]

TASK [Execute local ssh command to check ssh readiness] ************************
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (20 retries left).
ok: [s1 -> localhost]
FAILED - RETRYING: [rr -> localhost]: Execute local ssh command to check ssh readiness (50 retries left).
FAILED - RETRYING: [rr -> localhost]: Execute local ssh command to check ssh readiness (49 retries left).
FAILED - RETRYING: [rr -> localhost]: Execute local ssh command to check ssh readiness (48 retries left).
FAILED - RETRYING: [rr -> localhost]: Execute local ssh command to check ssh readiness (47 retries left).
FAILED - RETRYING: [rr -> localhost]: Execute local ssh command to check ssh readiness (46 retries left).
FAILED - RETRYING: [rr -> localhost]: Execute local ssh command to check ssh readiness (45 retries left).
FAILED - RETRYING: [rr -> localhost]: Execute local ssh command to check ssh readiness (44 retries left).
FAILED - RETRYING: [rr -> localhost]: Execute local ssh command to check ssh readiness (43 retries left).
ok: [rr -> localhost]

TASK [Confirm rr SSH server works] *********************************************
ok: [rr] => {
    "msg": "Node rr is ready."
}
ok: [s1] => {
    "msg": "Node s1 is ready."
}

TASK [Find device readiness script] ********************************************
ok: [s2]
ok: [h1]
ok: [h2]
ok: [rr]
ok: [s1]

TASK [Wait for device to become ready] *****************************************
skipping: [s1]
skipping: [s2]
skipping: [h1]
skipping: [h2]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/nxos.yml for rr

TASK [Wait for Eth1/1 to appear] ***********************************************
ok: [rr]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [rr]

TASK [Find configuration template for normalize] *******************************
ok: [rr]

TASK [fail] ********************************************************************
skipping: [rr]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [rr]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [rr]

TASK [Deploy normalize configuration] ******************************************
skipping: [rr]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s1]

TASK [Find configuration template for normalize] *******************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "normalize configuration for s1\n=========================================\n!\ninterface Ethernet1\n shutdown\n!\ninterface Ethernet2\n shutdown\n"
}

TASK [Deploy normalize configuration] ******************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s1

TASK [eos_config: deploying normalize from /work/netlab_cicd/hogs/node_files/s1/normalize] ***
[WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation
[WARNING]: Task result `warnings` was <class 'str'> instead of <class 'list'>.
changed: [s1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s2]

TASK [Find configuration template for normalize] *******************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s2]

TASK [Deploy normalize configuration] ******************************************
skipping: [s2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h1]

TASK [Find configuration template for normalize] *******************************
ok: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy normalize configuration] ******************************************
skipping: [h1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h2]

TASK [Find configuration template for normalize] *******************************
ok: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy normalize configuration] ******************************************
skipping: [h2]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [rr]

TASK [Find configuration template for initial] *********************************
ok: [rr]

TASK [fail] ********************************************************************
skipping: [rr]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [rr]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [rr] => {
    "msg": "initial configuration for rr\n=========================================\nhostname rr\n!\nno ip domain-lookup\n!\nfeature lldp\n!\nusername vagrant password vagrant\n!\nip host h1 172.31.1.4\nip host h2 172.31.1.5\nip host s1 10.0.0.2\nip host s2 10.0.0.3\n!\n!\ninterface mgmt0\n no lldp transmit\n no lldp receive\n!\ninterface loopback0\n no shutdown\n ip address 10.0.0.1/32\n ipv6 address 2001:db8:cafe:1::1/64\n ipv6 nd ra-interval 5 min 3\n!\ninterface Ethernet1/1\n no shutdown\n no switchport\n mac-address caf0.0001.0001\n description rr -> s1\n mtu 1600\n ip address 10.1.0.1/30\n ipv6 address 2001:db8:1::1/64\n ipv6 nd ra-interval 5 min 3\n!\ninterface Ethernet1/2\n no shutdown\n no switchport\n mac-address caf0.0001.0002\n description rr -> s2\n mtu 1600\n ip address 10.1.0.5/30\n ipv6 address 2001:db8:1:1::1/64\n ipv6 nd ra-interval 5 min 3\n!\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/nxos.yml for rr

TASK [nxos_config: deploying initial from /work/netlab_cicd/hogs/node_files/rr/initial] ***
changed: [rr]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s1]

TASK [Find configuration template for initial] *********************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "initial configuration for s1\n=========================================\nhostname s1\n!\nlogging monitor debugging\naaa authorization exec default local\n!\nlldp run\nip routing\nipv6 unicast-routing\n!\n!\nip host h1 172.31.1.4\nip host h2 172.31.1.5\nip host rr 10.0.0.1 10.1.0.1 10.1.0.5\nip host s2 10.0.0.3 10.1.0.6\nipv6 host rr 2001:db8:cafe:1::1\nipv6 host s2 2001:db8:cafe:3::1\n!\ninterface Management0\n no lldp transmit\n no lldp receive\n!\ninterface Loopback0\n ip address 10.0.0.2/32\n ipv6 nd ra interval 5\n ipv6 address 2001:db8:cafe:2::1/64\n!\ninterface Ethernet1\n no switchport\n mtu 1600\n description s1 -> rr\n ip address 10.1.0.2/30\n ipv6 nd ra interval 5\n ipv6 address 2001:db8:1::2/64\n mac-address caf0.0002.0001\n!\n no shutdown\n!\ninterface Ethernet2\n no switchport\n description [Access VLAN red] s1 -> h1\n!\n no shutdown\n!\ninterface Vlan1000\n description VLAN red (1000) -> [h1,h2,s2]\n!\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s1

TASK [eos_config: deploying initial from /work/netlab_cicd/hogs/node_files/s1/initial] ***
changed: [s1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s2]

TASK [Find configuration template for initial] *********************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "initial configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1600\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s2\n!\nlog file /tmp/logging\n\n!\nip forwarding\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.3/32\n ipv6 address 2001:db8:cafe:3::1/64\n!\ninterface eth1\n no shutdown\n description s2 -> rr\n ip address 10.1.0.6/30\n ipv6 address 2001:db8:1:1::2/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s2 -> h2\n ! no ip address\n!\ninterface vlan1000\n no shutdown\n description VLAN red (1000) -> [h1,s1,h2]\n ! no ip address\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for s2

TASK [Attempt to load VRF kernel module] ***************************************
changed: [s2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [s2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/s2/initial] ***
changed: [s2]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/s2/initial] ***
skipping: [s2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h1]

TASK [Find configuration template for initial] *********************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy initial configuration] ********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h2]

TASK [Find configuration template for initial] *********************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy initial configuration] ********************************************
skipping: [h2]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [s2]
ok: [h1]
ok: [h2]
ok: [rr]
ok: [s1]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr => (item=vxlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr => (item=evpn)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=vxlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=evpn)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=vxlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=evpn)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=vxlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=evpn)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=vxlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=evpn)

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [rr]

TASK [Find configuration template for vlan] ************************************
skipping: [rr]

TASK [fail] ********************************************************************
skipping: [rr]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [rr]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [rr]

TASK [Deploy vlan configuration] ***********************************************
skipping: [rr]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [rr]

TASK [Find configuration template for routing] *********************************
skipping: [rr]

TASK [fail] ********************************************************************
skipping: [rr]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [rr]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [rr]

TASK [Deploy routing configuration] ********************************************
skipping: [rr]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [rr]

TASK [Find configuration template for ospf] ************************************
ok: [rr]

TASK [fail] ********************************************************************
skipping: [rr]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [rr]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [rr] => {
    "msg": "ospf configuration for rr\n=========================================\nfeature ospf\n!\nrouter ospf 1\n router-id 10.0.0.1\n timers throttle spf 100 200 500\n timers throttle lsa 0 100 500\n!\ninterface loopback0\n ip router ospf 1 area 0.0.0.0\n!\ninterface Ethernet1/1\n! rr -> s1\n ip router ospf 1 area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface Ethernet1/2\n! rr -> s2\n ip router ospf 1 area 0.0.0.0\n ip ospf network point-to-point\n!\nfeature ospfv3\n!\nrouter ospfv3 1\n router-id 10.0.0.1\n!\ninterface loopback0\n! \n ipv6 router ospfv3 1 area 0.0.0.0\n!\ninterface Ethernet1/1\n! rr -> s1\n ipv6 router ospfv3 1 area 0.0.0.0\n ospfv3 network point-to-point\n!\ninterface Ethernet1/2\n! rr -> s2\n ipv6 router ospfv3 1 area 0.0.0.0\n ospfv3 network point-to-point\n!\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/nxos.yml for rr

TASK [nxos_config: deploying ospf from /work/netlab_cicd/hogs/node_files/rr/ospf] ***
changed: [rr]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [rr]

TASK [Find configuration template for bgp] *************************************
ok: [rr]

TASK [fail] ********************************************************************
skipping: [rr]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [rr]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [rr] => {
    "msg": "bgp configuration for rr\n=========================================\n!\nfeature bgp\n!\nrouter bgp 65000\n  router-id 10.0.0.1\n  cluster-id 10.0.0.1\n!\n address-family ipv4 unicast\n!\n  network 10.0.0.1/32\n!\n!\n!\n address-family ipv6 unicast\n!\n  network 2001:db8:cafe:1::/64\n!\n!\n!\n neighbor 10.0.0.2 remote-as 65000\n  description s1\n  update-source loopback0\n  address-family ipv4 unicast\n   next-hop-self\n   route-reflector-client\n   send-community both\n!\n neighbor 10.0.0.3 remote-as 65000\n  description s2\n  update-source loopback0\n  address-family ipv4 unicast\n   next-hop-self\n   route-reflector-client\n   send-community both\n!\n neighbor 2001:db8:cafe:2::1 remote-as 65000\n  description s1\n  update-source loopback0\n  address-family ipv6 unicast\n   next-hop-self\n   route-reflector-client\n   send-community both\n!\n neighbor 2001:db8:cafe:3::1 remote-as 65000\n  description s2\n  update-source loopback0\n  address-family ipv6 unicast\n   next-hop-self\n   route-reflector-client\n   send-community both\n!\n!\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/nxos.yml for rr

TASK [nxos_config: deploying bgp from /work/netlab_cicd/hogs/node_files/rr/bgp] ***
changed: [rr]

TASK [Figure out whether to deploy the module vxlan on current device] *********
ok: [rr]

TASK [Find configuration template for vxlan] ***********************************
skipping: [rr]

TASK [fail] ********************************************************************
skipping: [rr]

TASK [Find configuration deployment deploy_script for vxlan] *******************
skipping: [rr]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [rr]

TASK [Deploy vxlan configuration] **********************************************
skipping: [rr]

TASK [Figure out whether to deploy the module evpn on current device] **********
ok: [rr]

TASK [Find configuration template for evpn] ************************************
ok: [rr]

TASK [fail] ********************************************************************
skipping: [rr]

TASK [Find configuration deployment deploy_script for evpn] ********************
ok: [rr]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [rr] => {
    "msg": "evpn configuration for rr\n=========================================\nnv overlay evpn\n!\n!\n!\nrouter bgp 65000\n  neighbor 10.0.0.2\n    address-family l2vpn evpn\n      send-community both\n      route-reflector-client\n!\n  neighbor 10.0.0.3\n    address-family l2vpn evpn\n      send-community both\n      route-reflector-client\n!\n"
}

TASK [Deploy evpn configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/nxos.yml for rr

TASK [nxos_config: deploying evpn from /work/netlab_cicd/hogs/node_files/rr/evpn] ***
changed: [rr]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [s1]

TASK [Find configuration template for vlan] ************************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "vlan configuration for s1\n=========================================\nvlan 1000\n name red\n!\n\n!\ninterface Ethernet2\n switchport\n switchport access vlan 1000\n!\ninterface Vlan1000\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s1

TASK [eos_config: deploying vlan from /work/netlab_cicd/hogs/node_files/s1/vlan] ***
changed: [s1]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [s1]

TASK [Find configuration template for routing] *********************************
skipping: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s1]

TASK [Deploy routing configuration] ********************************************
skipping: [s1]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [s1]

TASK [Find configuration template for ospf] ************************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "ospf configuration for s1\n=========================================\n!\n! OSPFv2 configuration\n!\nrouter ospf 1\n router-id 10.0.0.2\n interface unnumbered hello mask tx 0.0.0.0\n timers spf delay initial 100 200 500\n timers lsa rx min interval 100\n timers lsa tx delay initial 100 200 500\n\n\n!\ninterface Loopback0\n! \n ip ospf area 0.0.0.0\n!\ninterface Ethernet1\n! s1 -> rr\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n!\n! OSPFv3 configuration\n!\ninterface Loopback0\n! \n ipv6 ospf 1 area 0.0.0.0\n!\ninterface Ethernet1\n! s1 -> rr\n ipv6 ospf 1 area 0.0.0.0\n ipv6 ospf network point-to-point\n!\n!\nipv6 router ospf 1\n router-id 10.0.0.2\n timers spf delay initial 100 200 500\n timers lsa rx min interval 100\n timers lsa tx delay initial 100 200 500\n\n\n\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s1

TASK [eos_config: deploying ospf from /work/netlab_cicd/hogs/node_files/s1/ospf] ***
changed: [s1]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [s1]

TASK [Find configuration template for bgp] *************************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "bgp configuration for s1\n=========================================\n!\nroute-map next-hop-self-ipv4 permit 10\n   match route-type external\n   set ip next-hop peer-address\n!\nroute-map next-hop-self-ipv4 permit 20\n!\nroute-map next-hop-self-ipv6 permit 10\n   match route-type external\n   set ipv6 next-hop peer-address\n!\nroute-map next-hop-self-ipv6 permit 20\n!\n!\nrouter bgp 65000\n  bgp advertise-inactive\n  bgp log-neighbor-changes\n  no bgp default ipv4-unicast\n  no bgp default ipv6-unicast\n  router-id 10.0.0.2\n!\n  neighbor 10.0.0.1 remote-as 65000\n  neighbor 10.0.0.1 description rr\n  neighbor 10.0.0.1 update-source Loopback0\n  neighbor 10.0.0.1 send-community standard extended large \n!\n  neighbor 2001:db8:cafe:1::1 remote-as 65000\n  neighbor 2001:db8:cafe:1::1 description rr\n  neighbor 2001:db8:cafe:1::1 update-source Loopback0\n  neighbor 2001:db8:cafe:1::1 send-community standard extended large \n!\n!\n address-family ipv4\n\n!\n!\n! Originate networks from connected subnets\n!\n  network 10.0.0.2/32\n!\n!\n  neighbor 10.0.0.1 activate\n  neighbor 10.0.0.1 route-map next-hop-self-ipv4 out\n!\n address-family ipv6\n\n!\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:cafe:2::/64\n!\n!\n  neighbor 2001:db8:cafe:1::1 activate\n  neighbor 2001:db8:cafe:1::1 route-map next-hop-self-ipv6 out\n!\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s1

TASK [eos_config: deploying bgp from /work/netlab_cicd/hogs/node_files/s1/bgp] ***
changed: [s1]

TASK [Figure out whether to deploy the module vxlan on current device] *********
ok: [s1]

TASK [Find configuration template for vxlan] ***********************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for vxlan] *******************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "vxlan configuration for s1\n=========================================\ninterface vxlan 1\n  vxlan source-interface Loopback0\n  vxlan vlan 1000 vni 1000\n"
}

TASK [Deploy vxlan configuration] **********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s1

TASK [eos_config: deploying vxlan from /work/netlab_cicd/hogs/node_files/s1/vxlan] ***
changed: [s1]

TASK [Figure out whether to deploy the module evpn on current device] **********
ok: [s1]

TASK [Find configuration template for evpn] ************************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for evpn] ********************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "evpn configuration for s1\n=========================================\n!\nrouter bgp 65000\n address-family evpn\n!\n  neighbor 10.0.0.1 activate\n!\n vlan 1000\n  rd 10.0.0.2:1000\n  route-target import 65000:1000\n  route-target export 65000:1000\n  redistribute learned\n"
}

TASK [Deploy evpn configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s1

TASK [eos_config: deploying evpn from /work/netlab_cicd/hogs/node_files/s1/evpn] ***
changed: [s1]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [s2]

TASK [Find configuration template for vlan] ************************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "vlan configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\nif [ ! -e /sys/devices/virtual/net/vlan1000 ]; then\n  ip link add vlan1000 type bridge\n  ip link set dev vlan1000 address ca:f4:00:03:00:00\n\n  ip addr flush dev vlan1000\nfi\n\nip link set dev eth2 master vlan1000\n\nip link set dev vlan1000 up\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy vlan config from /work/netlab_cicd/hogs/node_files/s2/vlan] ***
changed: [s2]

TASK [run vtysh to import vlan config from /work/netlab_cicd/hogs/node_files/s2/vlan] ***
skipping: [s2]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [s2]

TASK [Find configuration template for routing] *********************************
skipping: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s2]

TASK [Deploy routing configuration] ********************************************
skipping: [s2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [s2]

TASK [Find configuration template for ospf] ************************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "ospf configuration for s2\n=========================================\n!\n! OSPFv2 FRR configuration\n!\nrouter ospf\n ospf router-id 10.0.0.3\n timers throttle spf 10 50 500\n timers throttle lsa all 100\n timers lsa min-arrival 100\n\n\nexit\n!\ninterface lo\n! \n ip ospf area 0.0.0.0\n!\ninterface eth1\n! s2 -> rr\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n!\n! OSPFv3 FRR configuration\n!\ninterface lo\n! \n ipv6 ospf6 area 0.0.0.0\n!\ninterface eth1\n! s2 -> rr\n ipv6 ospf6 area 0.0.0.0\n ipv6 ospf6 network point-to-point\n!\n!\nrouter ospf6\n ospf6 router-id 10.0.0.3\n timers lsa min-arrival 100\n timers throttle spf 10 50 500\n\n\nexit\n\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/hogs/node_files/s2/ospf] ***
skipping: [s2]

TASK [run vtysh to import ospf config from /work/netlab_cicd/hogs/node_files/s2/ospf] ***
changed: [s2]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [s2]

TASK [Find configuration template for bgp] *************************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "bgp configuration for s2\n=========================================\n!\nrouter bgp 65000\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.3\n!\n  neighbor 10.0.0.1 remote-as 65000\n  neighbor 10.0.0.1 description rr\n  neighbor 10.0.0.1 update-source lo\n!\n  neighbor 2001:db8:cafe:1::1 remote-as 65000\n  neighbor 2001:db8:cafe:1::1 description rr\n  neighbor 2001:db8:cafe:1::1 update-source lo\n!\n address-family ipv4 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 10.0.0.3/32\n!\n  neighbor 10.0.0.1 activate\n  neighbor 10.0.0.1 next-hop-self\n  no neighbor 10.0.0.1 send-community all\n  neighbor 10.0.0.1 send-community standard\n  neighbor 10.0.0.1 send-community large\n  neighbor 10.0.0.1 send-community extended\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:cafe:3::/64\n!\n  neighbor 2001:db8:cafe:1::1 activate\n  neighbor 2001:db8:cafe:1::1 next-hop-self\n  no neighbor 2001:db8:cafe:1::1 send-community all\n  neighbor 2001:db8:cafe:1::1 send-community standard\n  neighbor 2001:db8:cafe:1::1 send-community large\n  neighbor 2001:db8:cafe:1::1 send-community extended\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/hogs/node_files/s2/bgp] ***
skipping: [s2]

TASK [run vtysh to import bgp config from /work/netlab_cicd/hogs/node_files/s2/bgp] ***
changed: [s2]

TASK [Figure out whether to deploy the module vxlan on current device] *********
ok: [s2]

TASK [Find configuration template for vxlan] ***********************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for vxlan] *******************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "vxlan configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\n\n\n\n# Create L3 VNIs with bridges and add to correct vrf table\n\n# Create VXLAN L2 interface per vni\nip link add vxlan1000 type vxlan \\\n  id 1000 \\\n  dstport 4789 \\\n  local 10.0.0.3 nolearning\n#\n# Add it to the VLAN bridge (create if needed for l3 vnis); disable STP\nif [ ! -e /sys/devices/virtual/net/vlan1000 ]; then\nip link add vlan1000 type bridge\nip link set up dev vlan1000\nfi\nip link set dev vxlan1000 master vlan1000\nip link set vlan1000 type bridge stp_state 0\n\n# Do not generate ipv6 link-local address for VXLAN devices\nip link set mtu 1500 addrgenmode none dev vxlan1000\n# Disable dynamic MAC learning for evpn, see https://docs.frrouting.org/en/latest/evpn.html\nbridge link set dev vxlan1000 learning off\nip link set up dev vxlan1000\n\n\nexit $?\n"
}

TASK [Deploy vxlan configuration] **********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy vxlan config from /work/netlab_cicd/hogs/node_files/s2/vxlan] ***
changed: [s2]

TASK [run vtysh to import vxlan config from /work/netlab_cicd/hogs/node_files/s2/vxlan] ***
skipping: [s2]

TASK [Figure out whether to deploy the module evpn on current device] **********
ok: [s2]

TASK [Find configuration template for evpn] ************************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for evpn] ********************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "evpn configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e\ncat >/tmp/evpn_config <<CONFIG\nrouter bgp 65000\n address-family l2vpn evpn\n  advertise-all-vni\n  advertise-svi-ip\n  advertise ipv4 unicast\n  advertise ipv6 unicast\n\n! Configure explicit Route Targets and RD per L2 VNI; auto-derived differs\n  vni 1000\n   rd 10.0.0.3:1000\n   route-target import 65000:1000\n   route-target export 65000:1000\n  exit-vni\n\n  neighbor 10.0.0.1 activate\n#  neighbor 10.0.0.1 soft-reconfiguration inbound\n\n exit-address-family\n!\n \nexit\n\n! L3 VRF EVPN handling\n!\ndo write\nCONFIG\nvtysh -f /tmp/evpn_config\nvtysh -c 'clear bgp *'\n"
}

TASK [Deploy evpn configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy evpn config from /work/netlab_cicd/hogs/node_files/s2/evpn] ***
changed: [s2]

TASK [run vtysh to import evpn config from /work/netlab_cicd/hogs/node_files/s2/evpn] ***
skipping: [s2]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h1]

TASK [Find configuration template for vlan] ************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h1]

TASK [Find configuration template for routing] *********************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy routing configuration] ********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h1]

TASK [Find configuration template for ospf] ************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [h1]

TASK [Find configuration template for bgp] *************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for bgp] *********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy bgp configuration] ************************************************
skipping: [h1]

TASK [Figure out whether to deploy the module vxlan on current device] *********
ok: [h1]

TASK [Find configuration template for vxlan] ***********************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for vxlan] *******************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy vxlan configuration] **********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module evpn on current device] **********
ok: [h1]

TASK [Find configuration template for evpn] ************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for evpn] ********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy evpn configuration] ***********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h2]

TASK [Find configuration template for vlan] ************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h2]

TASK [Find configuration template for routing] *********************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy routing configuration] ********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h2]

TASK [Find configuration template for ospf] ************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [h2]

TASK [Find configuration template for bgp] *************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for bgp] *********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy bgp configuration] ************************************************
skipping: [h2]

TASK [Figure out whether to deploy the module vxlan on current device] *********
ok: [h2]

TASK [Find configuration template for vxlan] ***********************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for vxlan] *******************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy vxlan configuration] **********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module evpn on current device] **********
ok: [h2]

TASK [Find configuration template for evpn] ************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for evpn] ********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy evpn configuration] ***********************************************
skipping: [h2]

PLAY [Deploy custom deployment templates] **************************************

TASK [Run custom configuration deployment scripts] *****************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-custom-config.yml for s1 => (item=_n_s1)

TASK [Find configuration template] *********************************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Check is the configuration template is a file] ***************************
ok: [s1 -> localhost]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Process template /work/netlab_cicd/hogs/node_files/s1/_n_s1 for s1] ******
skipping: [s1]

TASK [Find custom configuration deployment script] *****************************
ok: [s1]

TASK [Run the configuration deployment script] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s1

TASK [eos_config: deploying _n_s1 from /work/netlab_cicd/hogs/node_files/s1/_n_s1] ***
changed: [s1]

PLAY RECAP *********************************************************************
h1                         : ok=21   changed=0    unreachable=0    failed=0    skipped=40   rescued=0    ignored=0   
h2                         : ok=21   changed=0    unreachable=0    failed=0    skipped=40   rescued=0    ignored=0   
rr                         : ok=48   changed=4    unreachable=0    failed=0    skipped=22   rescued=0    ignored=0   
s1                         : ok=64   changed=8    unreachable=0    failed=0    skipped=16   rescued=0    ignored=0   
s2                         : ok=65   changed=13   unreachable=0    failed=0    skipped=23   rescued=0    ignored=0   


Warning: The following warnings were generated during the 'netlab initial' processing
Warning: ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
Results of configuration script deployments
================================================================================
h1                           OK: 2   
h2                           OK: 2   


The device under test is an EVPN route reflector. It should propagate
EVPN AF routes between PE-devices, resulting in VXLAN-based VLAN
extension.

* h1 and h2 should be able to ping each other

Please note it might take a while for the lab to work due to
STP learning phase