[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] skipping: [srv] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/routeros7.yml for dut TASK [Execute local ssh command to check router readiness] ********************* skipping: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for h1, h2, srv, dut TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:2::1/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:2::1/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:2:1::2/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:2:1::2/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [dut] => msg: |- initial configuration for dut ========================================= /system identity set name="dut" /interface bridge add name=loopback protocol-mode=none /ipv6 address add interface=loopback address=2001:db8:1:4::1/64 /ip/vrf/add place-before=0 name=blue interfaces=ether3 /ip/vrf/add place-before=0 name=common interfaces=ether4 /ip/vrf/add place-before=0 name=red interfaces=ether2 /interface ethernet set comment="dut -> h1 [stub]" ether2 /ipv6 address add interface=ether2 address=2001:db8:2::4/64 /ipv6 nd add interface=ether2 advertise-dns=no ra-interval=3s-30s /interface ethernet set comment="dut -> h2 [stub]" ether3 /ipv6 address add interface=ether3 address=2001:db8:2:1::4/64 /ipv6 nd add interface=ether3 advertise-dns=no ra-interval=3s-30s /interface ethernet set comment="dut -> srv [stub]" ether4 /ipv6 address add interface=ether4 address=2001:db8:2:2::4/64 /ipv6 nd add interface=ether4 advertise-dns=no ra-interval=3s-30s /ip neighbor discovery-settings set discover-interface-list=all ok: [srv] => msg: |- initial configuration for srv ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:2:2::3/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:2:2::3/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2, srv included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/routeros7.yml for dut TASK [set_fact] **************************************************************** ok: [h1] ok: [h2] ok: [srv] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [srv -> localhost] TASK [Initial container configuration via /tmp/config-jVzgudRU-h1.sh] ********** changed: [h2 -> localhost] changed: [srv -> localhost] changed: [h1 -> localhost] TASK [file] ******************************************************************** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [srv -> localhost] TASK [load initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/routeros7.j2] *** ok: [dut] TASK [Run commands on CHR] ***************************************************** changed: [dut] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut => (item=vrf) TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [dut] TASK [Find configuration template for vrf] ************************************* ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- vrf configuration for dut ========================================= /routing/bgp/vpn add label-allocation-policy=per-vrf vrf=blue route-distinguisher=65000:2 import.route-targets=65000:2,65000:3 export.route-targets=65000:2 export.redistribute=bgp,connected,ospf,static,vpn /routing/bgp/template add name=vrf_blue as=65000 output.network=bgp-networks-blue vrf=blue routing-table=blue output.redistribute=connected,bgp,bgp-mpls-vpn,vpn /routing/bgp/template set vrf_blue router-id=10.0.0.4 /routing/bgp/vpn add label-allocation-policy=per-vrf vrf=common route-distinguisher=65000:3 import.route-targets=65000:1,65000:2,65000:3 export.route-targets=65000:3 export.redistribute=bgp,connected,ospf,static,vpn /routing/bgp/template add name=vrf_common as=65000 output.network=bgp-networks-common vrf=common routing-table=common output.redistribute=connected,bgp,bgp-mpls-vpn,vpn /routing/bgp/template set vrf_common router-id=10.0.0.4 /routing/bgp/vpn add label-allocation-policy=per-vrf vrf=red route-distinguisher=65000:1 import.route-targets=65000:1,65000:3 export.route-targets=65000:1 export.redistribute=bgp,connected,ospf,static,vpn /routing/bgp/template add name=vrf_red as=65000 output.network=bgp-networks-red vrf=red routing-table=red output.redistribute=connected,bgp,bgp-mpls-vpn,vpn /routing/bgp/template set vrf_red router-id=10.0.0.4 TASK [Find configuration deployment deploy_script for vrf] ********************* ok: [dut] TASK [Deploy vrf configuration] ************************************************ included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/routeros7.yml for dut TASK [load vrf from /home/pipi/net101/tools/netsim/ansible/templates/vrf/routeros7.j2] *** ok: [dut] TASK [Run commands on CHR] ***************************************************** changed: [dut] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=20 changed=2 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h1 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h2 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 srv : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 The device under test has two user VRFs and a common services VRF. The lab tests inter-VRF route leaking between common VRF and other VRFs * h1 and h2 should be able to ping srv but not each other