[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Find device readiness script] ******************************************** ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [Wait for device to become ready] ***************************************** skipping: [dut] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/eos-clab.yml for r1, r2, r3, r4 TASK [Wait for cEOS SSH daemon to start] *************************************** ok: [r1] ok: [r3] ok: [r2] ok: [r4] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, r1, r2, r3, r4 TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Find configuration template for normalize] ******************************* ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [fail] ******************************************************************** skipping: [dut] skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [dut] ok: [r1] => msg: |- normalize configuration for r1 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.0b01 ok: [r2] => msg: |- normalize configuration for r2 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.0c01 ok: [r3] => msg: |- normalize configuration for r3 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.1701 ok: [r4] => msg: |- normalize configuration for r4 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.1801 TASK [Deploy normalize configuration] ****************************************** skipping: [dut] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [eos_config: deploying normalize from /home/pipi/net101/tools/netsim/ansible/templates/normalize/eos.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [r3] changed: [r2] changed: [r1] changed: [r4] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, r1, r2, r3, r4 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Find configuration template for initial] ********************************* ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [fail] ******************************************************************** skipping: [dut] skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- initial configuration for dut ========================================= #!/bin/vbash source /opt/vyatta/etc/functions/script-template if [ "$(id -g -n)" != 'vyattacfg' ] ; then exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@" fi # Configuration items start here configure set system host-name 'dut' set vrf name blue table 101 set vrf name red table 100 set interfaces dummy dum0 address 10.0.0.1/32 set interfaces dummy dum0 address 2001:db8:1:1::1/64 set interfaces ethernet eth1 description 'dut -> r1 [external]' set interfaces ethernet eth1 mtu 1500 set interfaces ethernet eth1 address 10.1.0.1/30 set interfaces ethernet eth1 vrf red set interfaces ethernet eth2 description 'dut -> r2 [external]' set interfaces ethernet eth2 mtu 1500 set interfaces ethernet eth2 address 10.1.0.5/30 set interfaces ethernet eth2 vrf red set interfaces ethernet eth3 description 'dut -> r3 [external]' set interfaces ethernet eth3 mtu 1500 set interfaces ethernet eth3 address 10.1.0.9/30 set interfaces ethernet eth3 vrf blue set interfaces ethernet eth4 description 'dut -> r4 [external]' set interfaces ethernet eth4 mtu 1500 set interfaces ethernet eth4 address 10.1.0.13/30 set interfaces ethernet eth4 vrf blue set service lldp interface all >/dev/null 2>/dev/null set service lldp interface eth0 disable >/dev/null 2>/dev/null set service lldp interface eth0 mode disable set service ssh # Commit, save and exit from subshell commit save exit # Restart FRR to pick up the new hostname sudo service frr restart ok: [r1] => msg: |- initial configuration for r1 ========================================= hostname r1 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 ip host dut-blue 10.1.0.9 10.1.0.13 ip host dut-red 10.1.0.1 10.1.0.5 ip host r2 10.0.0.12 10.1.0.6 ip host r3 10.0.0.23 10.1.0.10 ip host r4 10.0.0.24 10.1.0.14 ipv6 host dut 2001:db8:1:1::1 ipv6 host r2 2001:db8:1:c::1 ipv6 host r3 2001:db8:1:17::1 ipv6 host r4 2001:db8:1:18::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.11/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:b::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r1 -> dut [external] ip address 10.1.0.2/30 ! mac-address 52dc.cafe.0b01 no shutdown ! ok: [r2] => msg: |- initial configuration for r2 ========================================= hostname r2 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 ip host dut-blue 10.1.0.9 10.1.0.13 ip host dut-red 10.1.0.1 10.1.0.5 ip host r1 10.0.0.11 10.1.0.2 ip host r3 10.0.0.23 10.1.0.10 ip host r4 10.0.0.24 10.1.0.14 ipv6 host dut 2001:db8:1:1::1 ipv6 host r1 2001:db8:1:b::1 ipv6 host r3 2001:db8:1:17::1 ipv6 host r4 2001:db8:1:18::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.12/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:c::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r2 -> dut [external] ip address 10.1.0.6/30 ! mac-address 52dc.cafe.0c01 no shutdown ! ok: [r4] => msg: |- initial configuration for r4 ========================================= hostname r4 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 ip host dut-blue 10.1.0.9 10.1.0.13 ip host dut-red 10.1.0.1 10.1.0.5 ip host r1 10.0.0.11 10.1.0.2 ip host r2 10.0.0.12 10.1.0.6 ip host r3 10.0.0.23 10.1.0.10 ipv6 host dut 2001:db8:1:1::1 ipv6 host r1 2001:db8:1:b::1 ipv6 host r2 2001:db8:1:c::1 ipv6 host r3 2001:db8:1:17::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.24/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:18::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r4 -> dut [external] ip address 10.1.0.14/30 ! mac-address 52dc.cafe.1801 no shutdown ! ok: [r3] => msg: |- initial configuration for r3 ========================================= hostname r3 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 ip host dut-blue 10.1.0.9 10.1.0.13 ip host dut-red 10.1.0.1 10.1.0.5 ip host r1 10.0.0.11 10.1.0.2 ip host r2 10.0.0.12 10.1.0.6 ip host r4 10.0.0.24 10.1.0.14 ipv6 host dut 2001:db8:1:1::1 ipv6 host r1 2001:db8:1:b::1 ipv6 host r2 2001:db8:1:c::1 ipv6 host r4 2001:db8:1:18::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.23/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:17::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r3 -> dut [external] ip address 10.1.0.10/30 ! mac-address 52dc.cafe.1701 no shutdown ! TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/vyos.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [wait_for_connection] ***************************************************** ok: [dut] TASK [wait_for] **************************************************************** ok: [dut] TASK [set_fact] **************************************************************** ok: [dut] TASK [set_fact] **************************************************************** ok: [dut] TASK [template] **************************************************************** changed: [dut] TASK [execute config-initial.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/vyos.j2] *** changed: [dut] TASK [eos_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/eos.j2] *** changed: [r2] changed: [r3] changed: [r4] changed: [r1] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, r1, r2, r3, r4 => (item=bgp) included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, r1, r2, r3, r4 => (item=vrf) TASK [Figure out whether to deploy the module bgp on current device] *********** ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Find configuration template for bgp] ************************************* ok: [dut] ok: [r4] ok: [r1] ok: [r3] ok: [r2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find configuration deployment deploy_script for bgp] ********************* ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- bgp configuration for dut ========================================= #!/bin/vbash source /opt/vyatta/etc/functions/script-template if [ "$(id -g -n)" != 'vyattacfg' ] ; then exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@" fi # Configuration items start here configure set protocols bgp system-as 65000 set protocols bgp parameters router-id 10.0.0.1 # Work on Family ipv4 set protocols bgp address-family ipv4-unicast network 10.0.0.1/32 # Work on Family ipv6 set protocols bgp address-family ipv6-unicast network 2001:db8:1:1::/64 # Commit, save and exit from subshell commit save exit ok: [r1] => msg: |- bgp configuration for r1 ========================================= ! ! router bgp 65101 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.11 ! neighbor 10.1.0.1 remote-as 65000 neighbor 10.1.0.1 description dut neighbor 10.1.0.1 send-community standard large ! ! address-family ipv4 network 10.0.0.11/32 ! ! ! neighbor 10.1.0.1 activate ! address-family ipv6 network 2001:db8:1:b::/64 ! ! ! ! ok: [r2] => msg: |- bgp configuration for r2 ========================================= ! ! router bgp 65102 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.12 ! neighbor 10.1.0.5 remote-as 65000 neighbor 10.1.0.5 description dut neighbor 10.1.0.5 send-community standard large ! ! address-family ipv4 network 10.0.0.12/32 ! ! ! neighbor 10.1.0.5 activate ! address-family ipv6 network 2001:db8:1:c::/64 ! ! ! ! ok: [r4] => msg: |- bgp configuration for r4 ========================================= ! ! router bgp 65104 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.24 ! neighbor 10.1.0.13 remote-as 65000 neighbor 10.1.0.13 description dut neighbor 10.1.0.13 send-community standard large ! ! address-family ipv4 network 10.0.0.24/32 ! ! ! neighbor 10.1.0.13 activate ! address-family ipv6 network 2001:db8:1:18::/64 ! ! ! ! ok: [r3] => msg: |- bgp configuration for r3 ========================================= ! ! router bgp 65103 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.23 ! neighbor 10.1.0.9 remote-as 65000 neighbor 10.1.0.9 description dut neighbor 10.1.0.9 send-community standard large ! ! address-family ipv4 network 10.0.0.23/32 ! ! ! neighbor 10.1.0.9 activate ! address-family ipv6 network 2001:db8:1:17::/64 ! ! ! ! TASK [Deploy bgp configuration] ************************************************ included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/vyos.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [wait_for_connection] ***************************************************** skipping: [dut] TASK [wait_for] **************************************************************** skipping: [dut] TASK [set_fact] **************************************************************** ok: [dut] TASK [set_fact] **************************************************************** ok: [dut] TASK [template] **************************************************************** changed: [dut] TASK [execute config-bgp.sh to deploy bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/vyos.j2] *** changed: [dut] TASK [eos_config: deploying bgp from /home/pipi/net101/tools/netsim/ansible/templates/bgp/eos.j2] *** changed: [r2] changed: [r1] changed: [r3] changed: [r4] TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [dut] ok: [r1] ok: [r3] ok: [r2] ok: [r4] TASK [Find configuration template for vrf] ************************************* skipping: [r1] skipping: [r2] skipping: [r3] ok: [dut] skipping: [r4] TASK [fail] ******************************************************************** skipping: [dut] skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find configuration deployment deploy_script for vrf] ********************* skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] ok: [dut] => msg: |- vrf configuration for dut ========================================= #!/bin/vbash source /opt/vyatta/etc/functions/script-template if [ "$(id -g -n)" != 'vyattacfg' ] ; then exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@" fi # Configuration items start here configure set protocols bgp system-as 65000 # Enter vrf sublevel edit vrf name blue set protocols bgp system-as 65000 set protocols bgp parameters router-id 10.0.0.1 set protocols bgp address-family ipv4-unicast rd vpn export 65000:2 set protocols bgp address-family ipv4-unicast route-target vpn import "65000:2" set protocols bgp address-family ipv4-unicast route-target vpn export "65000:2" set protocols bgp address-family ipv4-unicast import vpn set protocols bgp address-family ipv4-unicast export vpn set protocols bgp address-family ipv4-unicast label vpn export auto set protocols bgp address-family ipv4-unicast redistribute connected # Define networks for VRF Loopback set protocols bgp neighbor 10.1.0.10 remote-as 65103 set protocols bgp neighbor 10.1.0.10 description 'r3' set protocols bgp neighbor 10.1.0.10 address-family ipv4-unicast soft-reconfiguration inbound set protocols bgp neighbor 10.1.0.10 address-family ipv4-unicast nexthop-self set protocols bgp neighbor 10.1.0.10 address-family ipv4-unicast disable-send-community extended set protocols bgp neighbor 10.1.0.14 remote-as 65104 set protocols bgp neighbor 10.1.0.14 description 'r4' set protocols bgp neighbor 10.1.0.14 address-family ipv4-unicast soft-reconfiguration inbound set protocols bgp neighbor 10.1.0.14 address-family ipv4-unicast nexthop-self set protocols bgp neighbor 10.1.0.14 address-family ipv4-unicast disable-send-community extended # Back to root level top edit vrf name red set protocols bgp system-as 65000 set protocols bgp parameters router-id 10.0.0.1 set protocols bgp address-family ipv4-unicast rd vpn export 65000:1 set protocols bgp address-family ipv4-unicast route-target vpn import "65000:1" set protocols bgp address-family ipv4-unicast route-target vpn export "65000:1" set protocols bgp address-family ipv4-unicast import vpn set protocols bgp address-family ipv4-unicast export vpn set protocols bgp address-family ipv4-unicast label vpn export auto set protocols bgp address-family ipv4-unicast redistribute connected # Define networks for VRF Loopback set protocols bgp neighbor 10.1.0.2 remote-as 65101 set protocols bgp neighbor 10.1.0.2 description 'r1' set protocols bgp neighbor 10.1.0.2 address-family ipv4-unicast soft-reconfiguration inbound set protocols bgp neighbor 10.1.0.2 address-family ipv4-unicast nexthop-self set protocols bgp neighbor 10.1.0.2 address-family ipv4-unicast disable-send-community extended set protocols bgp neighbor 10.1.0.6 remote-as 65102 set protocols bgp neighbor 10.1.0.6 description 'r2' set protocols bgp neighbor 10.1.0.6 address-family ipv4-unicast soft-reconfiguration inbound set protocols bgp neighbor 10.1.0.6 address-family ipv4-unicast nexthop-self set protocols bgp neighbor 10.1.0.6 address-family ipv4-unicast disable-send-community extended # Back to root level top # Commit, save and exit from subshell commit save exit TASK [Deploy vrf configuration] ************************************************ skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/vyos.yml for dut TASK [wait_for_connection] ***************************************************** skipping: [dut] TASK [wait_for] **************************************************************** skipping: [dut] TASK [set_fact] **************************************************************** ok: [dut] TASK [set_fact] **************************************************************** ok: [dut] TASK [template] **************************************************************** changed: [dut] TASK [execute config-vrf.sh to deploy vrf config from /home/pipi/net101/tools/netsim/ansible/templates/vrf/vyos.j2] *** changed: [dut] PLAY [Deploy custom deployment templates] ************************************** TASK [Run custom configuration deployment scripts] ***************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-custom-config.yml for r1, r2, r3, r4 => (item=bgp-xact) TASK [Find configuration template] ********************************************* ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Check is the configuration template is a file] *************************** ok: [r1 -> localhost] ok: [r4 -> localhost] ok: [r2 -> localhost] ok: [r3 -> localhost] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Process template /home/pipi/net101/tools/tests/integration/vrf/bgp-xact.j2 for r1] *** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find custom configuration deployment script] ***************************** ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Run the configuration deployment script] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [eos_config: deploying bgp-xact from /home/pipi/net101/tools/tests/integration/vrf/bgp-xact.j2] *** changed: [r2] changed: [r1] changed: [r3] changed: [r4] PLAY RECAP ********************************************************************* dut : ok=39 changed=6 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 r1 : ok=34 changed=4 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 r2 : ok=34 changed=4 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 r3 : ok=34 changed=4 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 r4 : ok=34 changed=4 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 The device under test has two VRFs with two interfaces in each VRF. Routers are attached to those interfaces and run BGP with device under test. Assuming the multi-vrf test case succeeded, this one adds BGP routing with CE routers. * r1 and r2 should be able to ping each other * r3 and r4 should be able to ping each other * r1 should not be able to reach r3 The test also checks whether DUT unnecessarily enables IPv6 AF over IPv4 EBGP sessions