[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [pe2]
ok: [ce1]
ok: [ce2]
ok: [p1]
ok: [p2]

TASK [Find device readiness script] ********************************************
ok: [dut]
ok: [pe2]
ok: [ce1]
ok: [ce2]
ok: [p1]
ok: [p2]

TASK [Wait for device to become ready] *****************************************
skipping: [dut]
skipping: [pe2]
skipping: [ce1]
skipping: [ce2]
skipping: [p1]
skipping: [p2]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, pe2, ce1, ce2, p1, p2

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]
ok: [pe2]
ok: [ce1]
ok: [p1]
ok: [ce2]
ok: [p2]

TASK [Find configuration template for initial] *********************************
ok: [dut]
ok: [pe2]
ok: [ce1]
ok: [ce2]
ok: [p1]
ok: [p2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    initial configuration for dut
    =========================================
    #!/bin/vbash
    source /opt/vyatta/etc/functions/script-template
  
    if [ "$(id -g -n)" != 'vyattacfg' ] ; then
        exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@"
    fi
  
    # Configuration items start here
  
    configure
    set system host-name 'dut'
  
    set vrf name tenant table 100
  
    set interfaces dummy dum0 address 10.0.0.3/32
  
  
  
    set interfaces ethernet eth1 description 'dut -> p1'
  
  
    set interfaces ethernet eth1 address 172.16.0.3/24
  
  
  
  
  
    set interfaces ethernet eth2 description 'dut -> ce1 [external]'
  
  
    set interfaces ethernet eth2 address 172.16.3.3/24
  
  
    set interfaces ethernet eth2 vrf tenant
  
  
    set service lldp interface all
    set service lldp interface eth0 disable
  
  
  
    # Commit, save and exit from subshell
  
    commit
    save
    exit
  
    # Restart FRR to pick up the new hostname
    sudo service frr restart
ok: [pe2] => 
  msg: |-
    initial configuration for pe2
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Build hosts file
    #
    echo "# Created by netlab initial" >>/tmp/hosts
    echo "10.0.0.1 172.16.3.1 ce1" >>/tmp/hosts
    echo "10.0.0.2 172.16.4.2 ce2" >>/tmp/hosts
    echo "10.0.0.3 172.16.0.3 dut" >>/tmp/hosts
    echo "172.16.3.3 dut-tenant" >>/tmp/hosts
    echo "10.0.0.5 172.16.0.5 172.16.1.5 p1" >>/tmp/hosts
    echo "10.0.0.6 172.16.1.6 172.16.2.6 p2" >>/tmp/hosts
    echo "10.0.0.4 172.16.2.4 pe2" >>/tmp/hosts
    echo "172.16.4.4 pe2-tenant" >>/tmp/hosts
    grep "Created by netlab" /etc/hosts || uniq /tmp/hosts|sort >>/etc/hosts
  
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth2.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    ip link set eth2 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname pe2
    !
    vrf mgmt
     exit-vrf
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.4/32
    !
    interface eth1
     no shutdown
     description pe2 -> p2
     ip address 172.16.2.4/24
    !
    interface eth2
     no shutdown
     description pe2 -> ce2 [external]
     ip address 172.16.4.4/24
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [ce1] => 
  msg: |-
    initial configuration for ce1
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Build hosts file
    #
    echo "# Created by netlab initial" >>/tmp/hosts
    echo "10.0.0.1 172.16.3.1 ce1" >>/tmp/hosts
    echo "10.0.0.2 172.16.4.2 ce2" >>/tmp/hosts
    echo "10.0.0.3 172.16.0.3 dut" >>/tmp/hosts
    echo "172.16.3.3 dut-tenant" >>/tmp/hosts
    echo "10.0.0.5 172.16.0.5 172.16.1.5 p1" >>/tmp/hosts
    echo "10.0.0.6 172.16.1.6 172.16.2.6 p2" >>/tmp/hosts
    echo "10.0.0.4 172.16.2.4 pe2" >>/tmp/hosts
    echo "172.16.4.4 pe2-tenant" >>/tmp/hosts
    grep "Created by netlab" /etc/hosts || uniq /tmp/hosts|sort >>/etc/hosts
  
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname ce1
    !
    vrf mgmt
     exit-vrf
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.1/32
    !
    interface eth1
     no shutdown
     description ce1 -> dut [external]
     ip address 172.16.3.1/24
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [ce2] => 
  msg: |-
    initial configuration for ce2
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Build hosts file
    #
    echo "# Created by netlab initial" >>/tmp/hosts
    echo "10.0.0.1 172.16.3.1 ce1" >>/tmp/hosts
    echo "10.0.0.2 172.16.4.2 ce2" >>/tmp/hosts
    echo "10.0.0.3 172.16.0.3 dut" >>/tmp/hosts
    echo "172.16.3.3 dut-tenant" >>/tmp/hosts
    echo "10.0.0.5 172.16.0.5 172.16.1.5 p1" >>/tmp/hosts
    echo "10.0.0.6 172.16.1.6 172.16.2.6 p2" >>/tmp/hosts
    echo "10.0.0.4 172.16.2.4 pe2" >>/tmp/hosts
    echo "172.16.4.4 pe2-tenant" >>/tmp/hosts
    grep "Created by netlab" /etc/hosts || uniq /tmp/hosts|sort >>/etc/hosts
  
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname ce2
    !
    vrf mgmt
     exit-vrf
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.2/32
    !
    interface eth1
     no shutdown
     description ce2 -> pe2 [external]
     ip address 172.16.4.2/24
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [p2] => 
  msg: |-
    initial configuration for p2
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Build hosts file
    #
    echo "# Created by netlab initial" >>/tmp/hosts
    echo "10.0.0.1 172.16.3.1 ce1" >>/tmp/hosts
    echo "10.0.0.2 172.16.4.2 ce2" >>/tmp/hosts
    echo "10.0.0.3 172.16.0.3 dut" >>/tmp/hosts
    echo "172.16.3.3 dut-tenant" >>/tmp/hosts
    echo "10.0.0.5 172.16.0.5 172.16.1.5 p1" >>/tmp/hosts
    echo "10.0.0.6 172.16.1.6 172.16.2.6 p2" >>/tmp/hosts
    echo "10.0.0.4 172.16.2.4 pe2" >>/tmp/hosts
    echo "172.16.4.4 pe2-tenant" >>/tmp/hosts
    grep "Created by netlab" /etc/hosts || uniq /tmp/hosts|sort >>/etc/hosts
  
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth2.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    ip link set eth2 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname p2
    !
    vrf mgmt
     exit-vrf
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.6/32
    !
    interface eth1
     no shutdown
     description p2 -> p1
     ip address 172.16.1.6/24
    !
    interface eth2
     no shutdown
     description p2 -> pe2
     ip address 172.16.2.6/24
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [p1] => 
  msg: |-
    initial configuration for p1
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Build hosts file
    #
    echo "# Created by netlab initial" >>/tmp/hosts
    echo "10.0.0.1 172.16.3.1 ce1" >>/tmp/hosts
    echo "10.0.0.2 172.16.4.2 ce2" >>/tmp/hosts
    echo "10.0.0.3 172.16.0.3 dut" >>/tmp/hosts
    echo "172.16.3.3 dut-tenant" >>/tmp/hosts
    echo "10.0.0.5 172.16.0.5 172.16.1.5 p1" >>/tmp/hosts
    echo "10.0.0.6 172.16.1.6 172.16.2.6 p2" >>/tmp/hosts
    echo "10.0.0.4 172.16.2.4 pe2" >>/tmp/hosts
    echo "172.16.4.4 pe2-tenant" >>/tmp/hosts
    grep "Created by netlab" /etc/hosts || uniq /tmp/hosts|sort >>/etc/hosts
  
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth2.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    ip link set eth2 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname p1
    !
    vrf mgmt
     exit-vrf
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.5/32
    !
    interface eth1
     no shutdown
     description p1 -> dut
     ip address 172.16.0.5/24
    !
    interface eth2
     no shutdown
     description p1 -> p2
     ip address 172.16.1.5/24
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]
ok: [pe2]
ok: [ce1]
ok: [ce2]
ok: [p2]
ok: [p1]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/vyos.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/initial-clab.yml for pe2, ce1, ce2, p1, p2

TASK [wait_for_connection] *****************************************************
skipping: [dut]

TASK [wait_for] ****************************************************************
skipping: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [template] ****************************************************************
changed: [dut]

TASK [execute config-initial.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/vyos.j2] ***
changed: [dut]

TASK [Attempt to load VRF kernel module] ***************************************
changed: [pe2 -> localhost]
changed: [ce1 -> localhost]
changed: [ce2 -> localhost]
changed: [p2 -> localhost]
changed: [p1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [pe2]
skipping: [ce1]
skipping: [ce2]
skipping: [p1]
skipping: [p2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/deploy-config.yml for pe2, ce1, ce2, p1, p2

TASK [template] ****************************************************************
changed: [ce2]
changed: [pe2]
changed: [ce1]
changed: [p1]
changed: [p2]

TASK [set_fact] ****************************************************************
ok: [pe2]
ok: [ce1]
ok: [ce2]
ok: [p2]
ok: [p1]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
changed: [p2]
changed: [pe2]
changed: [p1]
changed: [ce1]
changed: [ce2]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
skipping: [pe2]
skipping: [ce1]
skipping: [ce2]
skipping: [p1]
skipping: [p2]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [ce1]
ok: [ce2]
ok: [dut]
ok: [p2]
ok: [p1]
ok: [pe2]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for ce1, ce2, dut, p1, p2, pe2 => (item=bgp)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for ce1, ce2, dut, p1, p2, pe2 => (item=ospf)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for ce1, ce2, dut, p1, p2, pe2 => (item=mpls)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for ce1, ce2, dut, p1, p2, pe2 => (item=vrf)

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [ce1]
ok: [ce2]
ok: [dut]
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [Find configuration template for bgp] *************************************
skipping: [p1]
ok: [ce1]
skipping: [p2]
ok: [ce2]
ok: [dut]
ok: [pe2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [p1]
skipping: [p2]
ok: [ce1] => 
  msg: |-
    bgp configuration for ce1
    =========================================
    !
    router bgp 65100
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 10.0.0.1
    !
      neighbor 172.16.3.3 remote-as 65001
      neighbor 172.16.3.3 description dut
    !
     address-family ipv4 unicast
    !
      network 10.0.0.1/32
    !
    !
    !
      neighbor 172.16.3.3 activate
      no neighbor 172.16.3.3 send-community all
      neighbor 172.16.3.3 send-community standard
      neighbor 172.16.3.3 send-community large
    !
    !
    !
    do write
ok: [ce2] => 
  msg: |-
    bgp configuration for ce2
    =========================================
    !
    router bgp 65101
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 10.0.0.2
    !
      neighbor 172.16.4.4 remote-as 65001
      neighbor 172.16.4.4 description pe2
    !
     address-family ipv4 unicast
    !
      network 10.0.0.2/32
    !
    !
    !
      neighbor 172.16.4.4 activate
      no neighbor 172.16.4.4 send-community all
      neighbor 172.16.4.4 send-community standard
      neighbor 172.16.4.4 send-community large
    !
    !
    !
    do write
ok: [dut] => 
  msg: |-
    bgp configuration for dut
    =========================================
    #!/bin/vbash
    source /opt/vyatta/etc/functions/script-template
  
    if [ "$(id -g -n)" != 'vyattacfg' ] ; then
        exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@"
    fi
  
    # Configuration items start here
  
    configure
  
    set protocols bgp system-as 65001
  
    set protocols bgp parameters router-id 10.0.0.3
  
  
  
    set protocols bgp neighbor 10.0.0.4 remote-as 65001
    set protocols bgp neighbor 10.0.0.4 description 'pe2'
  
    set protocols bgp neighbor 10.0.0.4 update-source dum0
  
  
  
  
    # Work on Family ipv4
  
  
    set protocols bgp address-family ipv4-unicast network 10.0.0.3/32
  
  
  
  
  
    set protocols bgp neighbor 10.0.0.4 address-family ipv4-unicast soft-reconfiguration inbound
  
    set protocols bgp neighbor 10.0.0.4 address-family ipv4-unicast nexthop-self
  
  
  
  
  
    # Commit, save and exit from subshell
  
    commit
    save
    exit
ok: [pe2] => 
  msg: |-
    bgp configuration for pe2
    =========================================
    !
    router bgp 65001
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 10.0.0.4
    !
      neighbor 10.0.0.3 remote-as 65001
      neighbor 10.0.0.3 description dut
      neighbor 10.0.0.3 update-source lo
    !
     address-family ipv4 unicast
    !
      network 10.0.0.4/32
    !
    !
    !
      neighbor 10.0.0.3 activate
      neighbor 10.0.0.3 next-hop-self
      no neighbor 10.0.0.3 send-community all
      neighbor 10.0.0.3 send-community standard
      neighbor 10.0.0.3 send-community large
      neighbor 10.0.0.3 send-community extended
    !
    !
    !
    do write

TASK [Find configuration deployment deploy_script for bgp] *********************
skipping: [p1]
skipping: [p2]
ok: [ce1]
ok: [ce2]
ok: [dut]
ok: [pe2]

TASK [Deploy bgp configuration] ************************************************
skipping: [p1]
skipping: [p2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for ce1, ce2, pe2
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/vyos.yml for dut

TASK [template] ****************************************************************
changed: [ce1]
changed: [ce2]
changed: [pe2]

TASK [set_fact] ****************************************************************
ok: [ce1]
ok: [ce2]
ok: [pe2]

TASK [run /tmp/config.sh to deploy bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/frr.j2] ***
skipping: [ce1]
skipping: [ce2]
skipping: [pe2]

TASK [run vtysh to import bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/frr.j2] ***
changed: [ce2]
changed: [ce1]
changed: [pe2]

TASK [wait_for_connection] *****************************************************
skipping: [dut]

TASK [wait_for] ****************************************************************
skipping: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [template] ****************************************************************
changed: [dut]

TASK [execute config-bgp.sh to deploy bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/vyos.j2] ***
changed: [dut]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [ce1]
ok: [dut]
ok: [ce2]
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [Find configuration template for ospf] ************************************
skipping: [ce1]
skipping: [ce2]
ok: [dut]
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [ce1]
skipping: [ce2]
ok: [dut] => 
  msg: |-
    ospf configuration for dut
    =========================================
    #!/bin/vbash
    source /opt/vyatta/etc/functions/script-template
  
    if [ "$(id -g -n)" != 'vyattacfg' ] ; then
        exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@"
    fi
  
    # Configuration items start here
  
    configure
  
  
    set protocols ospf parameters router-id 10.0.0.3
  
  
  
  
    set protocols ospf interface dum0 passive
    set protocols ospf interface dum0 area 0.0.0.0
  
  
    set protocols ospf interface eth1 area 0.0.0.0
  
    set protocols ospf interface eth1 network point-to-point
  
  
  
    commit
    save
    exit
ok: [p1] => 
  msg: |-
    ospf configuration for p1
    =========================================
    !
    ! OSPFv2 FRR configuration
    !
    router ospf
     ospf router-id 10.0.0.5
     timers throttle spf 10 50 500
     timers throttle lsa all 100
     timers lsa min-arrival 100
  
    exit
    !
    interface lo
    !
     ip ospf area 0.0.0.0
    !
    interface eth1
    ! p1 -> dut
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
    interface eth2
    ! p1 -> p2
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
  
    !
    do write
ok: [p2] => 
  msg: |-
    ospf configuration for p2
    =========================================
    !
    ! OSPFv2 FRR configuration
    !
    router ospf
     ospf router-id 10.0.0.6
     timers throttle spf 10 50 500
     timers throttle lsa all 100
     timers lsa min-arrival 100
  
    exit
    !
    interface lo
    !
     ip ospf area 0.0.0.0
    !
    interface eth1
    ! p2 -> p1
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
    interface eth2
    ! p2 -> pe2
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
  
    !
    do write
ok: [pe2] => 
  msg: |-
    ospf configuration for pe2
    =========================================
    !
    ! OSPFv2 FRR configuration
    !
    router ospf
     ospf router-id 10.0.0.4
     timers throttle spf 10 50 500
     timers throttle lsa all 100
     timers lsa min-arrival 100
  
    exit
    !
    interface lo
    !
     ip ospf area 0.0.0.0
    !
    interface eth1
    ! pe2 -> p2
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
  
    !
    do write

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [ce1]
skipping: [ce2]
ok: [dut]
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [Deploy ospf configuration] ***********************************************
skipping: [ce1]
skipping: [ce2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/vyos.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for p1, p2, pe2

TASK [wait_for_connection] *****************************************************
skipping: [dut]

TASK [wait_for] ****************************************************************
skipping: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [template] ****************************************************************
changed: [dut]

TASK [execute config-ospf.sh to deploy ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/vyos.j2] ***
changed: [dut]

TASK [template] ****************************************************************
changed: [p2]
changed: [pe2]
changed: [p1]

TASK [set_fact] ****************************************************************
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [run /tmp/config.sh to deploy ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/frr.j2] ***
skipping: [p1]
skipping: [p2]
skipping: [pe2]

TASK [run vtysh to import ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/frr.j2] ***
changed: [p2]
changed: [p1]
changed: [pe2]

TASK [Figure out whether to deploy the module mpls on current device] **********
ok: [ce1]
ok: [ce2]
ok: [dut]
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [Find configuration template for mpls] ************************************
skipping: [ce1]
skipping: [ce2]
ok: [dut]
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [ce1]
skipping: [ce2]
ok: [dut] => 
  msg: |-
    mpls configuration for dut
    =========================================
    #!/bin/vbash
    source /opt/vyatta/etc/functions/script-template
  
    if [ "$(id -g -n)" != 'vyattacfg' ] ; then
        exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@"
    fi
  
    # Configuration items start here
    configure
  
    # MPLS: {'vpn': {'ipv4': ['ibgp']}}
    set protocols mpls ldp discovery transport-ipv4-address 10.0.0.3
  
    set protocols mpls ldp router-id 10.0.0.3
  
  
    set protocols mpls interface eth1
    set protocols mpls ldp interface eth1
  
    # Activate BGP AFI vpnv4 -> ipv4-vpn for VyOS NEIGH: 10.0.0.4
    set protocols bgp neighbor 10.0.0.4 address-family ipv4-vpn
  
    set protocols bgp neighbor 10.0.0.4 address-family ipv4-vpn nexthop-self
  
  
  
    # Commit, save and exit from subshell
  
    commit
    save
    exit
ok: [p1] => 
  msg: |-
    mpls configuration for p1
    =========================================
    #!/bin/bash
  
    set -e
  
    sysctl -w net.mpls.platform_labels=1048575
    sysctl -w net.mpls.conf.eth1.input=1
    sysctl -w net.mpls.conf.eth2.input=1
  
    cat >/tmp/config <<CONFIG
    !
    mpls ldp
      router-id 10.0.0.5
      dual-stack transport-connection prefer ipv4
      address-family ipv4
        discovery transport-address 10.0.0.5
        interface eth1
        exit
        interface eth2
        exit
      exit
      address-family ipv6
      exit
    !
    !
    do write
    CONFIG
    vtysh -f /tmp/config
  
    exit 0
ok: [p2] => 
  msg: |-
    mpls configuration for p2
    =========================================
    #!/bin/bash
  
    set -e
  
    sysctl -w net.mpls.platform_labels=1048575
    sysctl -w net.mpls.conf.eth1.input=1
    sysctl -w net.mpls.conf.eth2.input=1
  
    cat >/tmp/config <<CONFIG
    !
    mpls ldp
      router-id 10.0.0.6
      dual-stack transport-connection prefer ipv4
      address-family ipv4
        discovery transport-address 10.0.0.6
        interface eth1
        exit
        interface eth2
        exit
      exit
      address-family ipv6
      exit
    !
    !
    do write
    CONFIG
    vtysh -f /tmp/config
  
    exit 0
ok: [pe2] => 
  msg: |-
    mpls configuration for pe2
    =========================================
    #!/bin/bash
  
    set -e
  
    sysctl -w net.mpls.platform_labels=1048575
    sysctl -w net.mpls.conf.eth1.input=1
  
    cat >/tmp/config <<CONFIG
    !
    mpls ldp
      router-id 10.0.0.4
      dual-stack transport-connection prefer ipv4
      address-family ipv4
        discovery transport-address 10.0.0.4
        interface eth1
        exit
      exit
      address-family ipv6
      exit
    !
    !
    router bgp 65001
     address-family ipv4 vpn
    !
      neighbor 10.0.0.3 activate
      neighbor 10.0.0.3 send-community both
      neighbor 10.0.0.3 next-hop-self
  
    !
    do write
    CONFIG
    vtysh -f /tmp/config
  
    exit 0

TASK [Find configuration deployment deploy_script for mpls] ********************
skipping: [ce1]
skipping: [ce2]
ok: [dut]
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [Deploy mpls configuration] ***********************************************
skipping: [ce1]
skipping: [ce2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/vyos.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/mpls-clab.yml for p1, p2, pe2

TASK [wait_for_connection] *****************************************************
skipping: [dut]

TASK [wait_for] ****************************************************************
skipping: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [template] ****************************************************************
changed: [dut]

TASK [execute config-mpls.sh to deploy mpls config from /home/pipi/net101/tools/netsim/ansible/templates/mpls/vyos.j2] ***
changed: [dut]

TASK [Load MPLS kernel modules] ************************************************
changed: [p1 -> localhost]

TASK [include_tasks] ***********************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/deploy-config.yml for p1, p2, pe2

TASK [template] ****************************************************************
changed: [p1]
changed: [p2]
changed: [pe2]

TASK [set_fact] ****************************************************************
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [run /tmp/config.sh to deploy mpls config from /home/pipi/net101/tools/netsim/ansible/templates/mpls/frr.j2] ***
changed: [p2]
changed: [p1]
changed: [pe2]

TASK [run vtysh to import mpls config from /home/pipi/net101/tools/netsim/ansible/templates/mpls/frr.j2] ***
skipping: [p1]
skipping: [p2]
skipping: [pe2]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [ce1]
ok: [ce2]
ok: [dut]
ok: [p1]
ok: [p2]
ok: [pe2]

TASK [Find configuration template for vrf] *************************************
skipping: [ce1]
skipping: [ce2]
skipping: [p1]
ok: [dut]
skipping: [p2]
ok: [pe2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [ce1]
skipping: [ce2]
skipping: [p1]
skipping: [p2]
ok: [dut] => 
  msg: |-
    vrf configuration for dut
    =========================================
    #!/bin/vbash
    source /opt/vyatta/etc/functions/script-template
  
    if [ "$(id -g -n)" != 'vyattacfg' ] ; then
        exec sg vyattacfg -c "/bin/vbash $(readlink -f $0) $@"
    fi
  
    # Configuration items start here
    configure
  
    set protocols bgp system-as 65001
  
    # Enter vrf sublevel
    edit vrf name tenant
  
  
    set protocols bgp system-as 65001
  
    set protocols bgp parameters router-id 10.0.0.3
  
    set protocols bgp address-family ipv4-unicast rd vpn export 65000:1
    set protocols bgp address-family ipv4-unicast route-target vpn import "65000:1"
    set protocols bgp address-family ipv4-unicast route-target vpn export "65000:1"
    set protocols bgp address-family ipv4-unicast import vpn
    set protocols bgp address-family ipv4-unicast export vpn
    set protocols bgp address-family ipv4-unicast label vpn export auto
  
  
  
    set protocols bgp address-family ipv4-unicast redistribute connected
  
    # Define networks for VRF Loopback
  
  
  
    set protocols bgp neighbor 172.16.3.1 remote-as 65100
    set protocols bgp neighbor 172.16.3.1 description 'ce1'
  
  
  
  
  
    set protocols bgp neighbor 172.16.3.1 address-family ipv4-unicast soft-reconfiguration inbound
  
    set protocols bgp neighbor 172.16.3.1 address-family ipv4-unicast nexthop-self
  
    set protocols bgp neighbor 172.16.3.1 address-family ipv4-unicast disable-send-community extended
  
  
  
    # Back to root level
    top
  
    # Commit, save and exit from subshell
  
    commit
    save
    exit
ok: [pe2] => 
  msg: |-
    vrf configuration for pe2
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
  
    # Create VRF tables
    if [ ! -e /sys/devices/virtual/net/tenant ]; then
    ip link add tenant type vrf table 100
    fi
    ip link set tenant up
  
    # Move interfaces and loopbacks to vrfs
    sysctl -qw net.ipv6.conf.eth2.keep_addr_on_down=1
    ip link set eth2 master tenant
  
    cat >/tmp/vrf_config <<CONFIG
    vrf tenant
     exit-vrf
    !
    router bgp 65001
    !
    !
    router bgp 65001 vrf tenant
     no bgp ebgp-requires-policy
     no bgp default ipv4-unicast
     bgp router-id 10.0.0.4
     neighbor 172.16.4.2 remote-as 65101
     neighbor 172.16.4.2 description ce2
     address-family ipv4 unicast
    !
      redistribute connected
      label vpn export auto
      export vpn
      import vpn
      rd vpn export 65000:1
      rt vpn import 65000:1
      rt vpn export 65000:1
      neighbor 172.16.4.2 activate
      neighbor 172.16.4.2 send-community standard
      neighbor 172.16.4.2 send-community large
     exit-address-family
    !
    !
    do write
    !
    CONFIG
    vtysh -f /tmp/vrf_config
    exit $?

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [ce1]
skipping: [ce2]
skipping: [p1]
skipping: [p2]
ok: [dut]
ok: [pe2]

TASK [Deploy vrf configuration] ************************************************
skipping: [ce1]
skipping: [ce2]
skipping: [p1]
skipping: [p2]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/vyos.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for pe2

TASK [wait_for_connection] *****************************************************
skipping: [dut]

TASK [wait_for] ****************************************************************
skipping: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [template] ****************************************************************
changed: [dut]

TASK [execute config-vrf.sh to deploy vrf config from /home/pipi/net101/tools/netsim/ansible/templates/vrf/vyos.j2] ***
changed: [dut]

TASK [template] ****************************************************************
changed: [pe2]

TASK [set_fact] ****************************************************************
ok: [pe2]

TASK [run /tmp/config.sh to deploy vrf config from /home/pipi/net101/tools/netsim/ansible/templates/vrf/frr.j2] ***
changed: [pe2]

TASK [run vtysh to import vrf config from /home/pipi/net101/tools/netsim/ansible/templates/vrf/frr.j2] ***
skipping: [pe2]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
ce1                        : ok=29   changed=5    unreachable=0    failed=0    skipped=16   rescued=0    ignored=0   
ce2                        : ok=29   changed=5    unreachable=0    failed=0    skipped=16   rescued=0    ignored=0   
dut                        : ok=53   changed=10   unreachable=0    failed=0    skipped=11   rescued=0    ignored=0   
p1                         : ok=38   changed=8    unreachable=0    failed=0    skipped=13   rescued=0    ignored=0   
p2                         : ok=37   changed=7    unreachable=0    failed=0    skipped=13   rescued=0    ignored=0   
pe2                        : ok=51   changed=11   unreachable=0    failed=0    skipped=7    rescued=0    ignored=0   



The tested device (DUT) is a PE-router running MPLS/VPN with a simple VRF. Two BGP-speaking CE-routers are attached to the VRF (one per PE-router)
The PE-router has to run OSPF and LDP with a P-router, exchange IPv4 routes via BGP with the CE-router, convert VRF IPv4 routes into VPNv4 routes, and pass them to another PE-router.
The validation tests check BGP prefixes on the CE-routers and perform end-to-end connectivity tests between CE-router loopbacks.